Avidsen BambooView Manual de usuario
www.avidsen.com
V8
Eco
Friendly
Made with
&
YEARS
3
THE ECO-FRIENDLY
VIDEOPHONE
BambooView
Ref.112282 - Ref.112283
Designed to last
Compatible with any home
Easy to install and use
EN
EN3
EN 2
TABLE
OF CONTENTS
A -SAFETY
INSTRUCTIONS 05
1 - INTRODUCTION 05
2 - MAINTENANCE AND CLEANING 05
3 - RECYCLING 05
B - PRODUCT
DESCRIPTION 06
1 -KIT CONTENTS 06
2 - MONITOR 06
3 - INTERCOM PANEL 07
4 - WALL BRACKET 07
5 - MAINS ADAPTOR 07
C - INSTALLATION 08
1 - INSTALLATION OF THE INTERCOM PANEL 08
2 - INSTALLING THE MONITOR 10
3 - CONNECTIONS 10
3.1 - Connection between the monitor and the
intercom panel 11
3.2 - Connections 12
3.2.1 - Connections 2 monitors + 2 intercom
panels 12
3.2.2 - Connections 2 monitors
+ 1 Camera 12
3.2.3 - Settings for 2 families 13
3.2.4 - Connection to an electric strike plate with
additional power supply 13
3.3 - Activation and use of badges 14
3.3.1 - Initialisation 14
3.3.2 - Adding user badges 16
3.3.3 - Deactivating all badges 16
3.3.4 - Selecting the action associated with the
user badges 16
D - USING THE
PRODUCT 17
1 - IDENTIFY AND SPEAK TO THE VISITOR 17
2 - ACTIVATE THE INTERCOM PANEL FROM THE
MONITOR 17
3 - OPENING AN ELECTRIC LOCK AND AN
AUTOMATIC CONTROL SYSTEM (OPTIONAL) 17
4 - INTERCOM FEATURE 17
5 - MONITOR SETTINGS 18
6 - UNLOCKING USING A BADGE 18
7 - CHECKING PHOTOS TAKEN IN YOUR
ABSENCE 18
EN3
EN 2
TABLE
OF CONTENTS
E - TECHNICAL
AND LEGAL
INFORMATION 19
1 -TECHNICAL CHARACTERISTICS 19
2 - WARRANTY 20
3 -HELP AND ADVICE 20
4 - PRODUCT RETURNS/
AFTER SALES SERVICE 20
5 - DECLARATION OF CONFORMITY 20
EN 4
EN5
A - SAFETY INSTRUCTIONS
1 - INTRODUCTION
This video intercom system pairs two modules: a
receiver-monitor and an easy-to-install and use
intercom panel.
Key features:
• Colour video reception: when a visitor touches the
intercom panel call button, the panel immediately
transmits the image to the screen and a chime
indicates the visitor’s presence.
• Short-circuit protection
• Reverse polarity protection
• Automatic exposure correction: the video camera
automatically adjusts its exposure to match the
ambient light conditions.
• Enables control over two entrances (lock and
automated entryway).
• Integrated infrared vision enables the video
camera to identify visitors without needing
additional light.
• Opening the door and a control system: by
pressing buttons on the monitor, you can
control an electric lock and a dry contact for an
automated entryway (not included).
• Opening an electric strike plate or automated
entryway (not included) when one of the two
provided user badges is shown.
IMPORTANT: This notice should be read carefully
prior to installation. In the case of any problems,
our Hotline technicians are at your service to
provide you with any information you may need.
WARNING: any connection error may cause
damage to the device and void the warranty.
2 - MAINTENANCE AND INSTALLATION
GUIDANCE
Before installing the intercom, it is important to
check the following points:
• Do not install in cases of extreme humidity,
temperatures, corrosion risk or dust.
• Do not expose to direct sunlight, rain, or high
humidity.
• Do not plug the device into a multi-socket plug
adaptor or extension cord.
• Be careful not to lose the administrator badge
(red colour) or your product will be locked and
the warranty voided.
Keep it in a safe place.
• Do not install near other electronic devices such
as computers, televisions or video recorders.
• Do not install near acidic chemicals, ammonia or
sources of toxic gases.
• Do not clean with abrasive or corrosive products.
Use a damp cloth with soapy water.
• Unplug the device if it is not being used for an
extended period of time.
• Do not plug the device into national
telecommunications installations.
• The cable between the monitor and intercom
panel must not be extended. Avoid junctions
(insulating screw joints, soldered joints, etc.)
3 - RECYCLING
This logo denotes that devices no longer in
use should not be disposed of as
household waste.
They are likely to contain hazardous
substances that are dangerous to both
health and the environment. Return the
equipment to your local distributor or use
the recycling collection service provided by your local
council.
Pour en savoir plus :
www.quefairedemesdechets.fr
EN 6
B - PRODUCT DESCRIPTION
1 - CONTENTS OF THE KIT
2 - MONITOR
1 7" LCD screen
2 Microphone
3 Photo viewing button or menu access (hold for
5 seconds)
4 Door opening/camera button (if connected) or
top arrow
5 Electric strike plate button or bottom arrow
6 Handset button to answer calls, call another
monitor (ref. 112279) or left arrow
7 Surveillance mode to view the intercom panel
or right arrow
1x 1
5x 6 6x 1 7x 1
2x 1
8x 5
3x 1 4x 6
1 Monitor
2 Intercom panel
3 Monitor wall bracket
4 Dowels (2 for the monitor, 3 for the intercom
panel)
5 Screws (2 for the monitor, 3 for the intercom panel)
6 Screws for the intercom panel
7 Mains adapter
8 RFID badges (red x1, grey x1, blue x3)
9
8
34567
1
2
10
EN7
B - PRODUCT DESCRIPTION
8 Loudspeaker
9 Power supply terminals
10 Communication terminals
3 - INTERCOM PANEL
2
1
9
5
7
6
3
4
10
8
11
1 Protective hood
2 Lens
3 Name label
4 Speaker + badge reader
5 Microphone
6 Infrared illumination
7 Call button
8 RFID reset button
9 Connection terminals
10 Main or secondary intercom selection
switch
11 Camera direction slots
4 - WALL BRACKET
The monitor is designed to be xed to the wall. A wall bracket and the necessary fasteners are included.
5 - MAINS ADAPTER
A 230 Vac 50 Hz/17 Vdc 1.5 A mains adapter for powering the monitor is included in the kit. Do not use other power
supplies as they could cause irreparable damage to the device and invalidate the warranty.
Do not cut or extend the wire of the mains adapter or the warranty will be void.
EN 8
C - INSTALLATION
The recommended installation height for the intercom panel is about 160 cm from the ground and 150 cm from the
oor for the indoor unit.
50cm
160cm 150cm
70°
NOTE: For obvious safety reasons, the connections must only be made after shutting off the power supply.
1 - INTERCOM PANEL INSTALLATION
The intercom panel must not be directly exposed to bad weather. It should preferably be installed under a porch or
covered area.
Attach the intercom panel hood to your support using the screws and wall plugs suited to the support (the screws
and plugs supplied are suitable for solid walls).
90mm
50mm
ø6 mm
EN9
After making the connections on the intercom panel (see the connections paragraph), put the intercom panel into
the hood.
Then screw the intercom panel to the hood with the screw provided.
Put on the name label.
C - INSTALLATION
EN 10
C - INSTALLATION
2 - INSTALLING THE MONITOR
Attach the wall mount to the wall using the screws and wall plugs suited to the support (the screws and plugs
supplied are suitable for solid walls).
After connecting the monitor (refer to the "connections" paragraph), t the monitor onto its support.
Note: only 3 screws are needed to attach the bracket.
60mm
50mm
ø6 mm
3 - CONNECTIONS
• Do not increase the number of insulating screw joints or connectors on the connecting wire between the intercom
panel and the monitor
• Keep the connecting wire between the intercom panel and the monitor more than 50 cm away from any
electromagnetic interference (230 V cable, WiFi device, microwave ovens, etc.)
• You can connect and use an electric strike plate (not provided) with your intercom panel, with mechanical
memory.
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Teléfono de Avidsen
