Avidsen 114375 Manual de usuario
SOLAR POWER
KIT
12V and 24V compatible
Ref. 114375
www.avidsen.com
V1
COMPATIBLE
12V-24V UNIVERSEL 20W 12V 7AH X2
COMPATIBLE AVEC UNE LARGE
GAMME DE MOTORISATIONS
COMPATIBLE
VISIOPHONES SANS FILS
COMPATIBLE WITH A WIDE
RANGE OF MOTOR DRIVES
12-24V COMPATIBLECOMPATIBLE WITH WIRELESS
VIDEOPHONES
UNIVERSAL 20W 12V 7AH X2
EN3
EN 2
EN3
EN 2
CONTENTS
A - SAFETY
INSTRUCTIONS
1 - OPERATING PRECAUTIONS 04
2 - WARNING 04
3 - MAINTENANCE AND CLEANING 04
4 - RECYCLING 04
B - PRODUCT
DESCRIPTION
1 - KIT CONTENTS 05
C - INSTALLATION
1 - SOLAR PANEL 05
2 - BATTERY BOX 08
3 - BATTERY INSTALLATION 08
D - GENERAL
CONNECTION
1 - 12V CONNECTION 07
2 - 24V CONNECTION 10
3 - CONNECTION WITH AN AVIDSEN CIRCUIT
BOARD 10
E - USING WITH OTHER
AUTOMATIC OPENER
BRANDS
1 - USING WITH
OTHER AUTOMATIC OPENER BRANDS 13
F - FAQ
FAQ 13
G - TECHNICAL AND
LEGAL INFORMATION
1 - TECHNICAL CHARACTERISTICS 14
2 - WARRANTY 14
3 - HELP AND ADVICE 14
4 - DECLARATION OF CONFORMITY 15
EN 4
1 - OPERATING PRECAUTIONS
• Read this entire manual before starting the
installation.
• Do not allow children to handle the product.
• Be careful to check the connection polarity of
each item before installation.
• Do not use the solar kit in conjunction with a
power supply.
• Avidsen France cannot be held liable for any use
that does not comply with the instructions in this
manual and causes damage.
2 - WARNING
This product has been designed solely to power
a gate motor drive or a wireless videophone.
Any other use of the device is not covered by the
warranty or technical support. Avidsen cannot
be held liable for any use that does not comply
with the instructions in this manual and causes
damage. Children should be supervised to make
sure that they do not play with the device. Do not
modify or add components to the solar kit. When
replacing the battery, use a battery of the same
voltage and capacity.
3 - MAINTENANCE AND CLEANING
• External cleaning of the battery box can be
completed periodically. The solar panel must
be cleaned regularly in order to maintain full
efciency. Use a slightly dampened cloth for
cleaning.
• Do not use abrasive substances, substances
containing alcohol, thinners or other ammable
substances.
• Do not spray any products directly onto the unit.
4 - RECYCLING
This solar power kit is made of different types of
materials, some of which must be recycled and
others which must be discarded.
None of the items should be left outdoors or thrown
into a household bin. To separate the different
materials, the kit elements must be dissembled by
a qualied person.
Sort items by type:
- Battery
- Plastics
- Scrap metal
- Cardboard and paper
- Others
Once the items have been sorted, send them to
the appropriate recycling organisation and drop off
the other materials at a waste treatment centre.
Information on environmental
protection
The consumer is required by law to recycle all
used batteries and accumulators.
Disposing of them in household waste is strictly
forbidden.
Batteries/accumulators containing harmful
substances are marked with symbols (shown
opposite) which indicate that it is forbidden
to discard them in the household waste. The
corresponding heavy metal designations are
as follows: Cd = cadmium, Hg = mercury, Pb =
lead. These used batteries/accumulators can
be disposed of at local waste treatment centres
(centres for sorting recyclable materials), which
are required to accept them. Keep batteries, button
cells and accumulators out of reach of children.
Store them in a safe place that is not accessible
to children. They could be swallowed by children
or pets. Risk of death! In the event that a battery is
swallowed, immediately contact a doctor or go to
A&E! Never short-circuit the batteries, and do not
burn them as they may explode!
A - SAFETY INSTRUCTIONS
EN5
B - PRODUCT DESCRIPTION
1 - KIT CONTENTS
1x 1 2x 1 6x 1
5x 2
3x 4 4x 4
C - INSTALLATION
Use fasteners that are suitable for your type of post.
(the fasteners included in the kit are to be used when installing on solid materials only)
N
S
EW
SOUTH-FACING INSTALLATION MANDATORY:
The panel should never be in the shade.
1 - SOLAR PANEL
1Solar panel
2Charging box
3Screw for attaching the solar panel’s mounting
bracket
4Wall plugs for mounting the solar panel
5Batteries
6Battery terminals for
parallel and serial connection
7Solar panel brackets and connecting cables
7x 2
Possible installation directions
Top Side
EN 6
C - INSTALLATION
30,7 cm
10 cm
30,7 cm
10 cm
INSTALLATION ON A VERTICAL SURFACE
INSTALLATION ON A HORIZONTAL SURFACE
Maintain the outwards
direction of the
solar panel’s mounting
holes
EN7
C - INSTALLATION
CONNECTING THE WIRES TO THE SOLAR PANEL
back
EN 8
C - INSTALLATION
2 - BATTERY BOX
Internal view of box
Battery box
Solar panel
SOLARCHARGE CO NTROLLER
MOTORISATION BATTERY SOLARINVOLTAGE
24V12V
3 - BATTERY INSTALLATION
Depending on how long the batteries have been stored in the warehouse, it may be necessary to leave the
system to charge for several days (preferably sunny days) before being able to use the gate motor drive.
The solar power kit allows you to complete an average of 10 open/close cycles a day.
!!! NOTE!!!
MAKE SURE YOU MAINTAIN THE CORRECT CONNECTION POLARITY AT ALL TIMES
Use fasteners that
are suitable for
your type of post
EN9
D - GENERAL CONNECTION
REMINDER:
Batteries
To the regulator To the regulator
Batteries
1 2
12V parallel connection
The red terminals connect together.
The black terminals connect together.
24V serial connection
The terminals of battery 1to the regulator.
The terminals of battery 2to the regulator.
The terminals of battery 2connect to the
terminal of battery 1.
1 - 12V CONNECTION
Warning! Follow the steps below for connection (and vice versa for disconnection)
1. Connect the battery to the regulator (12V or 24V depending on your motor)
2. Connect the solar panel to the regulator
MOTORISATION BATTERYVOLTAGE
24V 12V
SOLAR IN
MOTORISATION BATTERYVOLTAGE
24V 12V
SOLAR IN
2 x 1.5mm2 (1.5m max.)
to automatic
battery
power
SET THE
SWITCH TO 12V
2 x 0.75mm2 (5m max.)
batteries
EN 10
D - GENERAL CONNECTION
2 - 24V CONNECTION
MOTORISATION BATTERYVOLTAGE
24V 12V
SOLAR IN
MOTORISATION BATTERYVOLTAGE
24V 12V
SOLAR IN
2 x 1.5mm2 (1.5m max.)
to automatic
battery
power
SET THE
SWITCH TO 24V
2 x 0.75mm2 (5m max.)
batteries
3 - CONNECTION WITH AVIDSEN CIRCUIT BOARD
12V CA2B9TRAC/TRAR/SLDTR Parallel battery connection
Do not connect anything to card’s GROUND - /+
MOTORISATION BATTERYVOLTAGE
24V 12V
SOLAR IN
M1 M2
2B 1B
SET THE
SWITCH TO 12V
batteries
Otros manuales para 114375
1
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
