Avidsen 127007 Manual de usuario
EN Smart WiFi Bulb - HomeLight
ref. 127007
www.avidsen.com
V1 Google Play
Free available on
Available on the
Google Play
Free available on
Available on the
Free available on
Avidsen
Home
V1
CONTENTS
A - SAFETY INSTRUCTIONS 05
1 - OPERATING PRECAUTIONS 05
2 - MAINTENANCE AND CLEANING 05
3 - RECYCLING 05
B - PRODUCT DESCRIPTION 06
1 - KIT CONTENTS 06
C - INSTALLATION 07
1 - OPERATION 07
2 - INSTALLING THE SMART BULB 07
3 - INSTALLING THE MOBILE APPLICATION AND CREATING AN ACCOUNT 07
4 - PAIRING THE BULB 08
5 - RESETTING THE SMART BULB 10
D - USING THE PRODUCT 12
1 - USING THE HOMELIGHT BULB 12
2 - BENEFIT AND USE OF PARTS IN THE AVIDSEN HOME APPLICATION
12
2.1 - CREATING A FAMILY 12
3 - USING THE PRODUCT WITH GOOGLE HOME 13
3.1 - IF YOU HAVE AN ANDROID SMARTPHONE WITH GOOGLE ASSISTANT 13
3.2 - IF YOU HAVE AN ANDROID SMARTPHONE WITHOUT GOOGLE ASSISTANT
OR AN IPHONE 14
4 - USING THE PRODUCT WITH AMAZON ALEXA 14
3ENEN
SMART WIFI BULB
3EN
5 - SCENARIO AND AUTOMATION 15
5.1 TRIGGERING A SET OF ACTIONS (SCENARIO) 15
5.1.1 PROGRAMMING THE “I’M GOING” SCENARIO 16
5.2 - CREATING AN AUTOMATION 18
5.2.1 PROGRAMMING THE “LIVING ROOM LIGHTING” AUTOMATION 20
E - TECHNICAL AND LEGAL INFORMATION 24
1 - TECHNICAL CHARACTERISTICS 24
2 - RADIO CHARACTERISTICS 24
3 - WARRANTY 25
4 - HELP AND ADVICE 25
5 - PRODUCT RETURNS/AFTER SALES SERVICE 25
6 - EC DECLARATION OF CONFORMITY 25
5EN
SMART WIFI BULB
A - SAFETY INSTRUCTIONS
1 - OPERATING PRECAUTIONS
• Do not allow children to operate the product.
• This product is designed exclusively for indoor
use.
• This product is designed to work with a
smartphone with WiFi
• The electrical installation must comply with
current standards (NF C 15-100).
2 - MAINTENANCE AND CLEANING
• Disconnect from the mains before carrying
out any work on the device.
• Your product does not require any specific
maintenance.
• Use a soft, slightly damp cloth to clean your
product.
• Do not use abrasive or corrosive substances.
• Do not spray any products directly onto the unit.
3 - RECYCLING
This logo denotes that devices no longer
in use should not be disposed of as
household waste. They are likely to
contain hazardous substances that are
dangerous to both health and the
environment. Return the equipment to
your local distributor or use the recycling collection
service provided by your local council.
Pour en savoir plus :
www.quefairedemesdechets.fr
6
SMART WIFI BULB
EN
B - PRODUCT DESCRIPTION
1 - CONTENTS OF THE KIT
1E27 base smart bulb
2Quickstart
1x 1 2x 1
7EN
SMART WIFI BULB
C - INSTALLATION
1 - OPERATION
This smart bulb allows you to control the lighting
in your rooms from your smartphone using the
dedicated app.
2 - INSTALLING THE SMART BULB
After disconnecting the electricity supply, insert the
base of the bulb in the socket and screw in. Once
the bulb is securely in place, turn the electricity
supply back on.
3 - INSTALLING THE MOBILE APP
AND CREATING AN ACCOUNT
Once the bulb has been inserted, follow the
instructions below to pair it.
Download the Avidsen Home app from the Android
Play Store or Apple App Store
Launch the app and log in if you already have an
account. If not, press CREER UN NOUVEAU
COMPTE (CREATE A NEW ACCOUNT) and let
the application guide you.
After accepting the privacy policy, you can create
an account with an email address or with a
phone number. Choose the method that suits
you; however, we recommend that you create your
account with an email address.
Procedure by email
8
SMART WIFI BULB
EN
C - INSTALLATION
Procedure by phone
In both cases, choose your country and then, after
entering your email address or phone number, select
Obtenir le code de vérification (Get verification
code).
In a few seconds, you will receive a validation code
in your email inbox or by SMS. Enter this code to
finalise registration.
Note that this email may go into your spam folder.
If you do not receive a code before the countdown
has ended, press renvoyer (return) and check the
email address or telephone number entered.
To complete your registration, set a password
between 6 and 20 characters long with letters and
numbers only, then press Terminé (Finished).
The application will redirect you directly to your
account home page where you can start pairing
your devices.
4 - PAIRING THE BULB
If you have more than one item to pair (plugs,
cameras, other bulbs) switch on only one item at
a time.
The following information may vary depending on
the app updates.
9EN
SMART WIFI BULB
C - INSTALLATION
As soon as it is powered, the bulb is in pairing
mode by default. It will then flash until the pairing
procedure is completed.
Make sure beforehand that your phone is connected
to the 2.4GHz wifi network that your bulb will be
using. To start the pairing, press AJOUTER (ADD).
Select the product that you wish to pair and select
the HomeLight smart bulb.
Check that the bulb is switched on and that it
is flashing. If not, refer to the resetting the bulb
chapter. Then press VOYANT DE CONFIRMATION
DANS LE FLASH (CONFIRMATION LIGHT
FLASHES).
.
Select your 2.4 GHz WiFi network (N.B. your
smartphone must be connected to the WiFi
network to which the bulb will be connected), enter
your network password and press CONFIRMER
(CONFIRM).
IMPORTANT: if a location authorisation request
message appears, you need to accept it for your
Android or iOS device to receive your WiFi.
IMPORTANT: This device is compatible with 2.4
GHz - WPA/WPA2 networks. Not compatible with 5
GHz WiFi or with WEP encryption. Please check the
WiFi settings of your router or contact your Internet
service provider if you experience connection
difficulties.
10
SMART WIFI BULB
EN
C - INSTALLATION
Your Avidsen Homelight bulb has been successfully
paired, you can specify a name and press TERMINE
(FINISHED).
Your bulb is now operational and will appear in your
app. You can now control your Avidsen Homelight
smart bulb from your smartphone.
IMPORTANT: For this bulb to work with your
smartphone and connected Google Assistants and
Alexa, the bulb must have power. Turning the bulb off
at the wall switch for example means that it will not
be possible to turn on the bulb using the At Home
app and the assistants.
5 - RESETTING THE SMART BULB
The following instructions may help you if
you have any problems during the pairing
procedure:
To reset the bulb, you need to switch the power off
and back on again 3 times in succession in under 2
seconds. The bulb will then start to flash to confirm
that the operation was successful.
Otros manuales para 127007
1
Tabla de contenidos
Manuales populares de Equipo de iluminación de otras marcas
Qazqa
Qazqa Suplux SL 3 Black 103062 Manual de usuario
Commercial Electric
Commercial Electric 54568141 Manual de usuario
CREE LIGHTING
CREE LIGHTING 304 Series Manual de usuario
Goobay
Goobay 49867 Manual de usuario
ECOMAN ITALIA
ECOMAN ITALIA LED T8 Manual de usuario
Alkalite
Alkalite Krypton KT-81 Manual de usuario
