Optional Metal Plate Installation
In most cases, a stable wireless charge connection can be found at the center of a phone.
1. Place and hold your Qi-enabled phone on the center of WiBa power bank and very slowly move your phone until a
charging connection is found.
2. Before adhering the metal plate, take note of the area on the device that receives a charging connection from WiBa
power bank.
3. Peel the adhesive cover off the metal plate and press firmly onto your phone or inside your case.
4. Once the metal plate is affixed, place the device onto the WiBa power bank to make it is charging properly.
Notes (Continued from previous page)
• We strongly recommend first applying the included adhesive film to the back of your Qi device or phone case before
applying the metal plate. This specifically applies to users of iPhone X/8/8 Plus and any device featuring an all glass back.
• We strongly recommend placing the metal plate to the back of your smartphone or, if using a case, to the outside of the
phone case. This will ensure a much stronger hold on WiBa’s power bank.
• Please note, even though the metal plate assists your device in staying attached to WiBa, excessive movement can
cause your phone and WiBa to separate.
Specifications
18
Size (Dimensions) 5.47” x 2.81” x 0.39”
Charging Pad
5.47” x 2.81” x 0.57”
Power Bank
Max Input 5V / 2.1A 5V / 2A
Wired Output N/A 5V / 2.1A
Charging Technology Qi Output Qi Output
No. of USB Charging Ports N/A 1
Weight 5.7 oz 5.3 oz
Capacity N/A 5000mAh, 18.5Wh
Input Type Type-C Type-C
Wireless Output 9V / 10W 5V / 5W
