AVer CAM130 Manual de usuario
CAM130 Content Camera
Quick Start Guide|安裝指南
安装指南|取扱説明書
빠른 가이드|Mode d'emploi
Manual de instrucciones|Краткое
руководство
English......................................................................................................1
繁體中文 .................................................................................................13
简体中文 .................................................................................................24
日本語.....................................................................................................35
한국어.....................................................................................................46
Français..................................................................................................58
Español...................................................................................................70
Pусский ..................................................................................................82
English-1
Content Camera Bundle Kit Package
CAM130 Content Camera
Unit & Lens Cover
Power Adapter and
Plug*
Tripod Screw
USB 3.1 Type-C to
Type-A Cable (1.8m)
QR Code Card
Whiteboard Mount
USB3.1
Extender 10m**
Remote Control
* The power adapter will vary depending on the standard power outlet of the country where it is sold.
* Power adapter will be required to support fill light function only when connecting CAM130 Content
Camera to PC USB 2.0 port.
** This extender only supports USB3.0 port of PC. Make sure your PC or MTR has USB3.0 port.
Otherwise, please purchase USB2.0 extender from the market, such as the Aten UE2120. Please
check our compatibility list before purchasing.
https://www.aver.com/Knowledge-Learns/conferencing-collaboration/compatibility-list
Optional Accessories
USB 3.1 Extender
10m/20m/30m
USB 2.0 Type-C to
Type-A Cable (5m)*
English-2
Overview
126
4 5 8 10
9113 7
2
12
13
(1)
(2)
(3)
(4)
(5)
(6)
(7)
Fill Light*
Microphones**
Color Sensor
Lens
Lens Cover
LED Indicator
Light Level Butto
(8)
(9)
(10)
(11)
(12)
(13)
Kensington Lock
USB 3.1 Type-C Port
DC 5V Power Jack
Color Temperature Button
Camera Clip
Tripod Screw Hole
* The fill light function is set “Manual mode” as default. Please use PTZApp 2 to change the settings.
** The built-in microphone of CAM130 Content Camera is disabled as default. Please use PTZApp 2 to
change the settings.
LED Indicator
Power on: Solid red
Start-up: Solid red
Power cable connected but USB cable unplugged: Solid orange
Video mute: Solid white
Video on: Solid blue
English-3
Control Fill Light via Device Buttons
Hold either temperature button or light level button for 2~3 sec. to switch on/off fill light
function.
Hold both temperature button and light level button together for 2~3 sec. to switch
between auto/manual light adjustment.The message below will show on the image screen.
Whether under auto or manual light adjustment mode, user can press the button to slightly
adjust color temperature or press the button to adjust light level.
[Note] The light brightness level in manual mode is much higher than auto mode. There are 12
levels for adjustment.
The camera can memorize the last setting or back to default. Please do advanced settings of the fill
light function via PTZApp 2.
The color temperature ranges from 2700k to 5700k.
[Notes]
1. By default, fill light function is set as “Manual”. You can use PTZApp 2 to change the setting to
“Auto” to automatically adjust the lighting level based on actual environment when video
streaming is on.
2. Users can do advanced lighting behavior setting under manual light adjustment mode viaAVer
PTZApp 2.
3. The fill light brightness level is much higher while connecting the camera to power with power
adapter.
4. If you want to unplug the power adapter while USB video streaming is on, please turn off fill light
first to avoid system shut down.
5. Power adapter will be required to support fill light function only when connecting CAM130
Content Camera to PC USB 2.0 port.
Control Fill Light via Remote Control
Long press either or button for 1~2 sec. to turn on/off the fill light function.
[Note] When fill light is on, press or button to increase/decrease light level.
English-4
Remote Control
SmartFrame ( ): One-click automatic FOV adjustment to fit all participants in screen. Press
and hold the button for 1~2 sec to switch from manually, auto framing and preset framing mode or
Off.
Enter ( ): Press it to show the currentAI function on screen such asAuto Framing.
Load Preset Hotkey ( ): Press it to move to preset position as user has set in sequence.
Number 0~9: Long press the number button to set preset point. One-click the number key to load
preset point.
FOV: Press then to change field of view between 90 degree and 120 degree.
WDR: Press then to enable/disable the WDR function.
Microphone: Press then to enable/disable microphone function.
Long press either or button for 1~2 sec to turn on/off the fill light function.
When fill light is off, press / button to increase/decrease image brightness.
When fill light is on, press / button to increase/decrease light level.
English-5
Installation
The CAM130 Content Camera can be mounted onto the wall or ceiling using the Whiteboard Mount
(refer to Bundle Kit Package).
Wall Mount Mode
Ceiling Mount Mode
Make sure that the camera has
captured the frames of whiteboard
completely.
Rotate to loose/tighten the
rod for length adjustment
Cable box to accommodate
USB extender
Adjustable camera angle
Whiteboard
At least 1M
Equipments:
1. CAM130 Content Camera.
2. USB3.1 Type-C to Type-A cable (1.8m is included in the CAM130 Content Camera package).
3. AVer whiteboard mount kits (Rod, Box and two M4x5mm screws).
4. AVer USB3.1 extender (10m is included in CAM130 Content Camera bundle kit. 20m and 30m are
optional).
5. MTR system (support USB3.0 USB port).
English-6
1. Mount the bottom case of the Box to the wall 3cm above the center line of whiteboard/IFP space (or
mount It to the ceiling).
[Note] Please prepare three screws before mounting (not included in the package). The diameter
of the three screw holes on the bottom case is Ø 6mm.
3 - Ø 6mm
205mm
60mm
2. Insert the cable (Type A side) into the rod hole till the end of the rod. Leave 20cm of the cable for
connecting to the camera.
Type C Type A
20cm
English-7
3. Align the top case with the bottom case of the Box, insert the rod into the hole of both cases, and
then rotate the rod to get it tightened with the box.
Wall Wall
4. Connect the USB Type A side to the female connector of USB3.1 Extender Cable and house the
joins inside the Box.
Wall Wall
USB3.1 Extender Cable
Type A
5. Secure the top case to the bottom case with the supplied two M4x5mm screws.
Wall
English-8
6. Install the camera to another end of the rod and turn the wheel to lock it.
7. Connect USB Type C to the Type C port located on the back of camera.
8. Rotate the rotating ring on the rod to adjust the rod length and rotate it again in the opposite
direction to lock.
9. Connect USB3.1 extender to MTR USB3.0 port. USB extender only supports USB3.0 port. Power
on MTR and set it up in Teams room. Make sure there is USB3.0 port in MTR since USB extender
doesn’t support USB2.0 port of PC/MTR. If using USB2.0 USB extender and want to use fill-light
function, please connect power adapter to camera.
Otros manuales para CAM130
4
Tabla de contenidos
Idiomas:
Otros manuales de Cámara web de AVer
