Avenview DVI-SPLITPRO-4X Manual de usuario
VIDEO WALLS VIDEO PROCESSORS
VIDEO MATRIX SWITCHES
EXTENDERS SPLITTERS WIRELESS
CABLES & ACCESSORIES
AV Connectivity, Distribution And Beyond...
Advanced Quad Screen Multiviewer
© 2013 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or
warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted
by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims
any express or implied warranty, relating to its products of Avenview Inc. is strictly prohibited.
Model #: DVI-SPLITPRO-4X
Military Residential
Medical Aviation
Education Industrial
Corporate House Of Worship
www.avenview.com
Product Application & Market Sectors
www.avenview.com Page 3
TABLE OF CONTENTS
1. GETTING STARTED ..........................................................................................................................1
1.1 IMPORTANT SAFEGUARDS..............................................................................................................1
1.2 SAFETY INSTRUCTIONS ..................................................................................................................1
1.3 REGULATORY NOTICES FEDERAL COMMUNICATIONS COMMISSION (FCC) ........................... 2
2. INTRODUCTION ..............................................................................................................................3
2.1 PACKAGE CONTENTS .....................................................................................................................4
2.2 BEFORE INSTALLATION...................................................................................................................5
2.3 PANEL DESCRIPTION.......................................................................................................................5
2.3.1 DVI-SPLITPRO-4X REAR PANEL..............................................................................................5
2.4 DVI-SPLITPRO-4X I/O CONNECTORS ...........................................................................................6
3. INSTALLATION..................................................................................................................................8
4. SOFTWARE INSTALLATION .............................................................................................................8
5. SOFTWARE SETUP GUIDE ...............................................................................................................9
6. SOFTWARE CONFIGURATION......................................................................................................19
7. CASCADE INSTALLATION .............................................................................................................20
8. FRONT PANEL CONTROLS...........................................................................................................23
8.1 FRONT PANEL PUSH BUTTONS DESCRIPTION ...................................................................23
8.2 FRONT PANEL PUSH BUTTONS FUNCTIONS......................................................................24
8.3 SELECTING PIP WINDOW ARRANGEMENT..........................................................................24
9. ON SCREEN DISPLAY MENU TREE...............................................................................................25
10. IR REMOTE CONTROL...................................................................................................................26
11. SPECIFICATIONS .............................................................................................................................27
12. RESOLUTIONS COMPATIBLITY.....................................................................................................28
12.1 DVI / COMPONENT / VGA.....................................................................................................28
12.2 DVI-OUT ..................................................................................................................................28
13. GENERAL TROUBLESHOOTING...................................................................................................29
www.avenview.com Page 1
SECTION 1: GETTING STARTED
1.1 IMPORTANT SAFEGUARDS
Please read all of these instructions carefully before you use the device. Save this manual for future reference.
What the warranty does not cover
•Any product, on which the serial number has been defaced, modified or removed.
•Damage, deterioration or malfunction resulting from:
•Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to
follow instructions supplied with the product.
•Repair or attempted repair by anyone not authorized by us.
•Any damage of the product due to shipment.
•Removal or installation of the product.
•Causes external to the product, such as electric power fluctuation or failure.
•Use of supplies or parts not meeting our specifications.
•Normal wear and tear.
•Any other causes which does not relate to a product defect.
•Removal, installation, and set-up service charges.
1.2 SAFETY INSTRUCTIONS
The Avenview DVI-SPLITPRO-4X Advanced Quad Screen Video Processor has been tested for conformance to safety regulations
and requirements, and has been certified for international use. However, like all electronic equipment’s, the DVI-SPLITPRO-4X
should be used with care. Read the following safety instructions to protect yourself from possible injury and to minimize the risk
of damage to the unit.
!Do not dismantle the housing or modify the module.
!Dismantling the housing or modifying the module may result in electrical shock or burn.
!Refer all servicing to qualified service personnel.
!Do not attempt to service this product yourself as opening or removing housing may expose you to dangerous voltage
or other hazards
!Keep the module away from liquids.
!Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on
to the housing, unplug the module immediately.
!Have the module checked by a qualified service engineer before using it again.
!Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
1. GETTING STARTED
www.avenview.com Page 2
1.3 REGULATORY NOTICES FEDERAL COMMUNICATIONS COMMISSION (FCC)
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment.
Warning symbols Description
ONLY USE THE PROVIDED POWER CABLE OR POWER
ADAPTER SUPPLIED. DO NOT TAMPER WITH THE
ELECTRICAL PARTS. THIS MAY RESULT IN ELECTRICAL
SHOCK OR BURN.
DO NOT TAMPER WITH THE UNIT. DOING SO WILL
VOID THE WARRANTY AND CONTINUED USE OF THE
PRODUCT.
THE VIDEO BOARDS ARE VERY SENSITIVE TO STATIC.
PLEASE ENSURE IF RACK MOUNTED OR INSTALLED ON A
SURFACE, IT SHOULD BE IN A GROUNDED ENVIROMENT.
www.avenview.com Page 3
2. INTRODUCTION
The DVI-SPLITPRO-4X Advanced Quad Screen Multiviewer with IR Remote Control is an advanced video processor
for most multimedia presentations. This unit is an ideal solution for applications where four video signals must be displayed on a
single display. It supports up to 16 types of video inputs, of which four can be outputted simultaneously with the desired display
layout through software control. The advanced video processor allows you to manipulate the output images to various sizes and
multiple positions on the desired display. This unit can controlled with the ease of the front panel buttons, IR remote and RS232
via a cable or control system, this functionality allow the user to easily set the desired outputs by 5 preset layouts or 8 custom
layouts saved by the user.
The embedded scalar converts signals from input sources to match the native resolution of monitors, flat panel displays,
projectors as well as user-selectable output settings up to WUXGA (1920x1200). Dual outputs are provided in both analog
(VGA) and digital (DVI) or (DVI/HDMI) format, one is connected to remote display and the other is connected to on-site display
for real time monitoring.
- Support six most popular video formats: four VGA, four DVI/HDMI, four component, four S-Video and four composite
inputs
- Input resolution support from 640x480 to 1920x1200, interlaced or progressive.
- DVI & HDMI
- Support HDCP 1.1
- Dual outputs (DVI / VGA), 640x480 to 1920x1200.
- Video background available.
- Adjustable size & position through software.
- Dynamic transition for video sizing and positioning
- Titles, borders and colored backgrounds.
- Resize, position, zoom & pan and blend output video.
- Image parameters and layouts are automatically saved in flash memory and can be recalled for later use.
- Several Image parameters and layouts can be saved in computers and can be loaded for later use.
- Video parameters adjustable (brightness, contrast, color temperature, etc.).
- User-selectable output settings, up to 1920x1200.
- Use as a Video Splitter, a Video Converter and a Video Switcher.
- Firmware upgradable for support of new features and technology enhancements.
- Control through RS-232/RS-485 over Cat-5 and IR Remote Control
- Can be cascaded to obtain more images using RS-485 control path
- Control protocol available for customer proprietary design
- 1RU Size
www.avenview.com Page 4
2.1 PACKAGE CONTENTS
Before you start the installation of the converter, please check the package contents.
1DVI-SPLITPRO-4X X1
2DVI – DVI & VGA BREAKOUT CABLE X4
3VGA TO COMPONENT BREAKOUT CABLE X4
4DVI TO VGA ADAPTER X4
5Y CABLE –S-VIDEO TO S-VIDEO-CVBS X4
6RACK MOUNTING KIT X1
7RS232 TO USB ADAPTER X1
8IR REMOTE CONTROL X1
9SOFTWARE CD X1
10 AC POWER SUPPLY X1
11 USER’S MANUAL X1
www.avenview.com Page 5
2.2 BEFORE INSTALLATION
•Put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction.
•Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high humidity.
•Use the DC power adapter with correct specifications. If inappropriate power supply is used then it may cause a fire.
•Do not twist or pull by force ends of the video cable. It can cause malfunction.
2.3 PANEL DESCRIPTION
Avenview Advanced Quad Screen Video Processor (DVI-SPLITPRO-4X) has 16 inputs and accepts both graphics and video
signals, which come from computers (DVI or VGA), composite, and component video sources respectively. You can pick up four
of the ten inputs and then display four of them simultaneously on the same screen.
2.3.1 DVI-SPLITPRO-4X REAR PANEL
To reset the DVI-SPLITPRO-4X to factory default settings: Turn on the DVI-SPLITPRO-4X then
switch both DIP Switches simultaneously up and down to reset the unit to factory default settings
The DVI input and output on the DVI-SPLITPRO-4X is also compatible with HDMI. Please see
the example of the cable above to use.
Note: Cable not included with packaging contents DVI to HDMI
www.avenview.com Page 6
2.4 DVI-SPLITPRO-4X I/O CONNECTORS
Avenview DVI-SPLITPRO-4X has 16 inputs and accepts both graphics and video signals, which come from computers (DVI or
VGA), composite, and component video sources respectively. You can pick up four of the ten inputs and then display four of
them simultaneously on the same screen.
CONNECTORS VIDEO SOURCE
INPUT DVI, COMPONENT, VGA,
COMPOSITE, S-VIDEO
DVI
HDMI
(DVI to HDMI Cable or Adapter)*NOT SUPPLIED*
VGA
(DVI to VGA Adapter)
Component (YPbPr)
(DVI to VGA Adapter and VGA to Component Adapter)
Composite
S-Video
OUTPUT
Display
DVI-I OUT
1 x DVI Display (1 x DVI/HDMI Display)
VGA Display
(DVI to VGA Adapter)
1 x DVI Display & 1 x VGA Display
(through DVI to DVI/VGA Y Cable)
www.avenview.com Page 7
Otros manuales para DVI-SPLITPRO-4X
2
Tabla de contenidos
Otros manuales de Cables y conectores de Avenview
Avenview
Avenview SPLIT-HDSDI-6 Manual de usuario
Avenview
Avenview SPLIT-DVI Series SPLIT-DVI-2 Manual de usuario
Avenview
Avenview FO-DP4K-MM Series Manual de usuario
Avenview
Avenview HDM-C61PX-SP8 Manual de usuario
Avenview
Avenview SPLIT-HDSDI-4-RS Manual de usuario
Avenview
Avenview SPLIT-HDM3D-4 Manual de usuario
Avenview
Avenview SPLIT-HDM3D-2 Manual de usuario
Avenview
Avenview HBT-C6POE-SP4 Manual de usuario
Avenview
Avenview SPLIT-HDM2-T4K-4 Manual de usuario
Avenview
Avenview SPLIT-HD42K-4 Manual de usuario
