Avdel 7287 Instrucciones de funcionamiento

The hydro-pneumatic 07287 tool is designed to place Avdel®lockbolt and breakstem fasteners at high speed making it ideal for batch or

flow-line assembly in a wide variety of applications throughout all industries.

The 07287 is of the remote intensifier or split tool concept consisting of; Pistol Grip head, Air Oil Intensifiers and Steel Enclosure

(see pages 5, 16, 18, 20 and 21).

Pistol Grip type head fitted with a pintail deflector is the standard tool for which a stem catching option and a side ejection accessory

are available (see details page 10). It is also possible to order the base tool only (part number 07287-00200) which will not be

fitted with a nose assembly.

07287 TOOL SELECTION

FASTENER

MATERIAL/DETAILØ

COMPLETE

TOOL PART Nº

NOSE ASSY

PART Nº

NAME & HEAD

Steel

Straight with Vertical Flats

Straight with Horizontal Flats

Straight with Horizontal Flats (Stepped)

Straight Round

Straight Round (Stepped)

MAXLOK®

HEMLOK®

AVTAINER®

MONOBOLT®

AVEX®

AVINOX®II

AVDELOK®

3/16

" (4.8mm)

1/4

" (6.4 mm)

1/4

" (6.4mm)

3/8

" (10 mm)

3/16

" (4.8 mm)

1/4

" (6.4 mm)

3/8

" (10 mm)

3/16

" (4.8 mm)

3/16

" (4.8 mm)

3/16

" (4.8 mm)

3/16

" (4.8 mm)

1/4

" (6.4 mm)

1/4

" (6.4 mm)

1/4

" (6.4 mm)

1/4

" (6.4 mm)

5/16

" (8.0 mm)

5/16

" (8.0 mm)

3/8

" (10 mm)

3/8

" (10 mm)

07287-00001

07287-00002

07287-00004

07287-00006

07287-00012

07287-00014

07287-00018

07287-00030

07287-00036

07287-00050

07287-00051

07287-00052

07287-00053

07287-00054

07287-00055

07287-00056

07287-00057

07287-00058

07287-00059

07610-02000

07610-02100

07612-02000

07498-00800

07498-04700

07498-04600

07220-07200

07490-04900

07498-01300

07200-02500

07200-02700

07200-02600

07200-02800

07200-03300

07200-03500

07220-02700

07220-03400

07220-02000

07220-03500

Standard

NOSE TIP

TYPE

07267-00900

07267-00800

1/4

" (6.4 mm)

07287-00016

07498-00500

Standard

07267-00800

07220-02500

ADAPTOR

Intent of Use

Tool Selection

Nose Assemblies

IMPORTANT

The air supply must be disconnected when fitting or removing nose assemblies unless specifically instructed

otherwise.

•Lightly coat the jaws with Molylithium grease.

•Drop Jaws 5into Jaw Housing 4or Chuck Collet 3, depending on whether you have a short or long nose assembly (see table

opposite for identification).

•Insert Jaw Spreader 7into Jaw Housing 4(locating in the ‘V’ shape formed by the jaws) or insert front Spring Guide 6into Chuck

Collet 3.

•Locate Buffer 8on Jaw Spreader 7.

•Locate Spring 9onto Jaw Spreader 7or onto Front Spring Guide 6.

•On long nose assemblies, screw Rear Spring Guide 10 into Chuck Collet 3.

•Fit Locking Ring 11 onto the end plug of the tool.

•Holding tool pointing down, screw on the assembled jaw housing or chuck collet onto the end plug and tighten with spanner.

•Screw Nose Tip 1into Nose Casing 2.

•Place Nose Casing 2over Jaw Housing 4or Chuck Collet 3and screw onto tool, tightening with spanner.

Fitting Instructions

12 3 5 10 116 9

1 2 4 9115 87

07287 Nose Assembly Components

This table lists nose assemblies. Each nose assembly represents a unique assembly of components which can be ordered individually.

Component numbers refer to the illustration above. We recommend some stock as items will need regular replacement. Read the

Nose Assemblies Servicing Instructions opposite carefully. All nose assemblies also include a locking ring part number

07340-00327.

It is essential that the correct nose assembly is fitted prior to operating the tool. By knowing your original complete tool part number

or the details of the fastener to be placed, you will be able to order a new complete nose assembly using the selection tables on

pages 8 and 9.

NOSE ASSY 1 2 4 5789

NOSE ASSY 1 2 3 56910

07498-00500 07497-03202 07498-00501 07498-00502 07497-03002* 07498-00507 07500-02005 07498-00503

07490-04900 07490-04400 07340-00306 07340-00304 07340-07502 07340-07503 07340-01503 07340-01502

07498-01300 07498-01400 07340-00306 07340-00304 07340-07502 07340-07503 07340-01503 07340-01502

07498-04600

07498-03202

07340-00306

07340-00304

07498-04501*

07498-04502

07498-03003

07100-04003

07498-04700

07498-03001

07340-00306

07498-04503

07498-04501*

07498-04900

07498-03003

07100-04003

Servicing Instructions

Selection Tables for Monobolt®, Avdelok®, Avtainer®, Maxlok®and Hemlok®

Nose Assemblies

AVDELOK®

07200-02500 07200-02501 07200-02101 07220-02102 07220-02104 07220-02103 --

07200-02600 07200-02601 07200-02201 07220-02302 07220-02104 07220-02103 --

07200-02700 07200-02701 07200-02101 07220-02102 07220-02104 07220-02103 --

07200-02800 07200-02801 07200-02201 07220-02302 07220-02104 07220-02103 --

07200-03300 07200-03301 07200-03302 07220-02302 07220-02104 07220-02103 --

07200-03500 07200-03501 07200-02201 07220-02302 07220-02104 07220-02103 --

07220-02000 07220-02001 07200-02002 07220-02003 07220-02603 07220-02605 --

07220-02700 07200-02601 07220-02701 07220-02606 07220-02603 07220-02605 --

07220-03400 07220-03401 07220-03402 07220-02606 07220-02603 07220-02605 07220-02604

07220-03500 07220-03501 07220-03502 07220-02003 07220-02603 07220-02605 --

12345 6

DESCRIPTION

ANVIL CHUCK CHUCK SPRING SPRING SPACER

COLLET JAWS GUIDE

NOSE ASSY

1 SET

07498-00802

07498-00501

07498-00801

07220-02302

07498-00803

07500-02005

07498-00503

07340-00327

NOSE TIP

NOSE CASING

CHUCK COLLET

JAWS

SPRING GUIDE

SPRING

THREADED SPRING GUIDE

LOCKING RING

1 SET

07612-02001

07612-02003

07612-02002

07612-04502

07498-03003

07340-00327

07007-00458

07340-00306

NOSE TIP

JAW HOUSING

JAWS

JAW SPREADER

BUFFER

LOCKING RING

SPRING

NOSE CASING

1 SET

07610-02001

07610-02002

07610-02003

07220-02103

07220-02104

07610-02004

07610-02101

07610-02102

07610-02103

07220-02103

07220-02104

07610-020041

ANVIL

CHUCK COLLET

CHUCK JAWS

SPRING

SPRING GUIDE

FRICTION RING

12 34 5 6 7 8

1 2345 678

123 4 5 6ITEM DESCRIPTION

07610-02000

PART Nº

07610-02100

PART Nº QTY

ITEM DESCRIPTION PART Nº QTY

MAXLOK®07610-02000 & 07610-02100

HEMLOK®07612-02000

1 SET

07220-07101

07220-06304

07220-07202

73411-05001

07220-06302

07220-06305

07220-06301

07220-02108

NOSE TIP

JAW HOUSING

NOSE CASING

JAWS

JAW SPREADER

SPRING

SPRING GUIDE

DUST COVER

ITEM DESCRIPTION PART Nº QTY

MONOBOLT®07220-07200

AVTAINER®07498-00800

Anvils are stamped "3/16M" or "1/4M" to aid identification

123456

123456 7 8

Nose assemblies should be serviced at weekly intervals.

•Remove the complete nose assembly using the reverse procedure to the ‘Fitting instructions’.

•Any worn or damaged part should be replaced by a new part.

•Particularly check wear on jaws.

•Ensure Jaw Spreader 7 assembly tube (where fitted) or Front Spring Guide 6is not distorted.

•Check Spring 9is not distorted.

•Assemble according to fitting instructions.

Item numbers in bold refer to the Nose Assembly drawing on page 8.

Otros manuales para 7287

Otros manuales de Herramientas de Avdel

Avdel

Avdel Genesis nG2 Manual de usuario

Manuales populares de Herramientas de otras marcas

Martor

Martor SECUNORM 175 Manual de usuario

ERKCO

ERKCO 1000 Manual de usuario

jbc

jbc N4473 Manual de usuario

FEINMETALL

FEINMETALL FZWZ-SET-001 Manual de usuario

Worx Professional

Worx Professional Sonicrafter WU676 Manual de usuario

Gage Bilt

Gage Bilt GB713SH Manual de usuario

Hilti

Hilti DX 9-ENP Manual de usuario

norbar

norbar NORTRONIC 34399 Manual de usuario

BGS technic

BGS technic 8578 Manual de usuario

Makita

Makita DHR241 Manual de usuario

Motor Guard

Motor Guard JMB-1250 Manual de usuario

Power Adhesives

Power Adhesives 805-12 Manual de usuario

Clemco

Clemco 24189 Manual de usuario

VVG

VVG VNG 903 Series Manual de usuario

Hilti

Hilti FX 3-A Manual de usuario

Grizzly

Grizzly H6472 Manual de usuario

axing

axing BWZ 5-02 Manual de usuario

Dh-Robotics

Dh-Robotics RGI-100 Cómo utilizar