AVANTREK Macrover100 Manual de usuario

Electric Bike

Model:Macrover100

- 01 -

Riding Safety

Thank you for choosing the AVANTREK Macrover 100 fat tires electric bike (hereinafter referred to as Macrover 100)! It is extremely important that you follow

the safety guidelines contained in this manual in order to ensure maximum safety for you as well as maximum durability of your eBike.

Before you ride your Macrover 100 for the first time, please be absolutely sure that it has been correctly assembled. You will find step by step instruction in

this manual.

Key assembly steps that must be completed with absolute certainty (to include secure fastening) are pedals, saddle height, handlebar (both rotation and

height) and wheels.

Please ensure all safety latches, including quick releases and rings, are locked in place and snug without any movement.

Please ensure all bolts (including the front/rear wheels, saddle bolt and brake rotors) are properly tightened. Certain components must be tightened to exact

specifications using a torque wrench for safety assurance.

We recommend you to always wear a helmet when riding any eBike.

Frequently check your tire pressures. They should be pumped to 1.4 bar (20 psi).

Do not attempt to charge your fat tire eBike if, the charger, or the power outlet is wet.

Do not drink and ride. Even a small amount of alcohol can impair your judgment, lowering your ability to remain safe on the Macrover 100.

Only use the AVANTREK supplied charger. Do not use a charger from any other different product models.

Please observe all traffic regulations and other applicable laws, including any lighting laws.

Warning: DO NOT take apart OR repair parts by yourself. Please go to your local bike shop that has experience with e-bikes. If in doubt, please contact our

customer service at support@iavantrek.com.

10.

11.

12.

Contents

- 02 -

1. PRODUCT OVERVIEW

2. PACKAGE CONTENTS

3. HOW TO ASSEMBLE THE EBIKE

4. HOW TO CHARGE THE BATTERY

5. RIDING MODES

6. DISPLAY AND BUTTONS

7. BEFORE YOU RIDE CHECKLIST

8. MAINTENANCE

9. CLEANING

10. STORAGE

11. DISPOSAL AT END-OF-LIFE

12. SPECIFICATIONS

13. WARRANTY

...........................................................................................................................................

..........................................................................................................................

.........................................................................................................................

......................................................................................................................................................

.......................................................................................................................................

...........................................................................................................................

.......................................................................................................................................................

..............................................................................................................................................................

.............................................................................................................................................................

................................................................................................................................

.................................................................................................................................................

...........................................................................................................................................................

1. PRODUCT OVERVIEW

- 03 -

LCD Display

Gear Lever

Brake

Handlebar

On/Of Switch

Battery

Saddle

Pedal

Charging

port

Front Fork

Quick Release

Disc Brake

Motor

2. PACKAGE CONTENTS

1 × Bike frame + rear wheel 1 × Wheel 1 × Saddle 2 × Pedal

1 × Wrench 1 × Charger

4 × Battery key

1 ×

Battery

1 × Derailleur protecting rack

1 × User manual

Carefully check package contents, if anything is missing or damaged, please contact online customer service for support.

- 04 -

5 × Allen Key

1 × Screwdriver

3. HOW TO ASSEMBLE THE BIKE

180°

- 05 -

Step 1. Adjust the stem

When unpacking your eBike, please verify that the above items are included in the package. If you are missing any components, please contact your dealer for support.

After verifying that all components are present and in good condition, you can assemble your new fat tires electric bike.

Please retain the box and packaging materials in case you need to ship your Macrover 100 in the future.

Before Installation

90°

Loosen

screws

- 06 -

90°

Step 2. Install the handlebar

WARNING: DO NOT over tighten the stem bolts. Over tightening the stem bolts can damage the steering system and cause loss of control.

disc brake

goes into the

brake caliper

- 07 -

Step 3. Install the front wheel

Warnings:

Your Macrover 100 is equipped with a front disk brake. Be careful not to damage the disk, caliper or brake pads when reinserting the disk into the

caliper. Never activate a disk brake’s control lever unless the disk is correctly inserted in the caliper.

Each side

of the wheel

has one

cone

spring only

When installing,

L to L,R to R

- 08 -

Step 4. Install the rear derailleur protecting rack

Step 5. Install pedals

1. Identify the correct side by finding the marked ‘R’ and ‘L’ at the pedals. Each pedal has an “L” sticker or “R” sticker to indicate left or right side of the eBike.

2. To install the left “L” pedal, carefully hand-screw it in, counter-clockwise direction. Repeat it to install the right “R” pedal by turning clockwise.

IMPORTANT: If the pedal does not turn smoothly into the crank, do not force it. Take it back out and try again until it goes in smoothly.

PLEASE NOTE: If after riding, the threads on your crank is stripped. You don’t have to follow this instruction. Your crank needs replacing (this is NOT

covered by warranty).

Safety Line

- 09 -

Step 6. Install the saddle

1. Insert the saddle into the seat post, then screw the bolts tightly.

2. Loosen the seat post quick release. Insert the seat post to the desired height before securing it in place with the quick release. Tighten the saddle bolt

before you ride.

IMPORTANT: Do not raise the seat post above the “minimum insert” line clearly printed on the backside of the seat post. Raising the seat post above the

minimum insert line can cause the seat post to fail, which could in turn result in loss of control of your Macrover 100 and could cause you serious injury.