AVANTIS CLASSVR CVR-255-64 Manual de usuario
www.classvr.com/support
www.classvr.com/safetyv1.0
ClassVR Headset Model Number: CVR-255-64
Virtual Reality Headset
and Case Guide
1.1. Connecting the power cable to the case of 4 and 8
Open the case by pushing the latch buttons down. Attach the power lead to the back of
the case making sure it is fully inserted.
Section 1
The Storage Case and Headset
2
1.2. The USB hub
The USB hub mounted in the top left corner of the case is used to charge each headset
via the connected cables. When the unit is charging you will see a green light appear on
the hub.
1.3. Charging the headsets
To charge the headsets, carefully place them back into the carry case making sure the
USB-C cable within the case is accessible. Then connect the cable to the USB-C port on
the bottom of the headset. When each device is charging you will see a light appear on the
bottom of the headset.
When the headsets are fully charged, we recommend switching the power supply o at the
mains. Make sure the headsets are fully charged before first use.
Make sure that the circle in the ClassVR logo is facing down when placed back into the
case. This ensures that the USB-C socket will be on the correct side.
3
1
3
4
2
1.4. The ClassVR headset at first glance
Once charged, to turn on the CVR-255-64 headset hold the power button down for 5
seconds. To turn the headset o hold the power button down until the pop-up window is
shown within the headset. From here select the ‘Shut down’ option by ‘looking’ at the on-
screen text, and use the action button to select.
Volume Up
Volume Down
Button Controls
Select/Action Button
Menu Button
Power Button
Back Button
1. Head Strap 6. Microphone 11. Left Headset Lens
2. Headset Buttons 7. Micro USB Slot 12. Proximity Sensor
3. Camera 8. 3.5mm Headphone Out 13. Right Headset Lens
4. Microphone 9. Power Button 14. Left Speaker
5. Volume Up/Down 10. Face Padding 15. Right Speaker
4
ClassVR headset connection ports
ClassVR headset face padding
5 6 7 98
10
11 12 13
14 15
5
1. Trigger/Action Button
2. Navigation Controller
3. Option Button
4. Back Button
5. USB-C Cable
6. USB-C to USB-A Adapter
7. Textured Body Grip
1.5. The ClassVR hand controller
All Avanti’s World explorable scenes can be accessed and viewed
with ClassVR headsets. The optional controller empowers students
to intuitively explore the virtual environment with a new found
fluidity and complete control.
The USB hand controller can be
connected to a ClassVR headset via the
supplied USB cable. Being solely powered
by the headset during use, the hand
controller doesn’t need to be charged.
When fitting to a CVR-255-64 headset
the USB-A adapter isn’t required so please
remove before use.
1
5
6
7
2
3
4
Compatible with
6
1.6. How to adjust the head strap
Pull the straps, then use the hook and loop
fastenings to tighten the straps so the headset fits
securely and comfortably on each student’s head.
1.7. How to replace the padding
Pull the foam face rest gently away from the headset housing taking care around the two
lenses. Replace the foam in the desired position, making sure the soft fabric is tucked
behind the two lenses and the proximity sensor is visible.
1.8. How to clean the headset and controller
To avoid transferring contagious conditions like conjunctivitis (pink eye), do not share the
headset or the controller with persons with contagious conditions, infections or diseases,
particularly of the eyes, skin or scalp. The headset and the controller should be cleaned
between each use with skin-friendly non-alcoholic antibacterial wipes and with a dry
microfibre cloth for the lenses.
7
2.1. Turning your headset on
To turn your ClassVR headset on, simply press and hold the power button on the bottom
right of the headset for five seconds. You will see the ClassVR logo appear followed by the
menu screen.
To conserve power, the screen will turn o when the headset is not in use. Simply place
the headset on your face to activate the sensor and the screen will turn on again.
Section 2
Learn the Basics: How do the ClassVR
headsets work?
Bluetooth This icon shows if Bluetooth is
enabled (disabled in some regions).
ARC App Load up preconfigured Augmented
Reality activities.
Device Information Quickly display
information about the headset.
White dot (reticle) Treat this dot as your select
tool to highlight items you wish to open.
VR Experiences Immerse your class in a
huge variety of Virtual Reality experiences,
either from the provided collections or
create your own using the ClassVR Portal.
QR Code Scanner Used to quickly switch
between collections of VR experiences.
Wi-Fi This icon indicates connectivity.
Battery Level Shown as a percentage.
1 2 3 4 5 6 7 8
1 5
2
6
3
7
4
8
8
Turn your head to find the icon you would like to select. Look at the icon. You should see a
white dot in the location of your gaze.
2.2. Navigation controls
While students are wearing the ClassVR headset and it is not being controlled by the
teacher, they can navigate using their head and the action button.
To select an experience
To go back to the menu screen
While wearing the headset, shake your head smoothly from side-to-side, or press the
menu button on the top right side of the headset.
Tilt your head to the left to scroll towards the left of the screen. Tilt it to the right to scroll
right.
To navigate left and right without turning around
9
While viewing a 360 picture
2.3. Using controls within an experience
Press and hold the select button
to zoom in.
Tilt your head to pan from side to
side without turning around.
2.4. To access Virtual Reality experiences
Simply open the QR Scanner app on the headset and look at the QR
Key on the relevant lesson plan. You will hear a beep and the related
VR experiences will become available.
2.5. To access Augmented Reality resources
When you see the ARC logo on a plan or worksheet, that means you
can launch Augmented Reality content simply by looking at it! First
open the ARC app from the home screen of your VR headset, then
look at the image on the teaching resource to bring it to life.
10
Tabla de contenidos
