Avalue Technology EMX-B75 Manual de usuario

Part No. E2017B75M00R

EMX-B75

Intel® Core™ i7/ i5/ i3/ Pentium®/ Celeron® Mini ITX

Motherboard with Intel® B75 Chipset

Quick Installation Guide

4th Ed –13 September 2013

EMX-B75 Quick Installation Guide

2 EMX-B75 Quick Installation Guide

FCC Statement

THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS

SUBJECT TO THE FOLLOWING TWO CONDITIONS:

(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE.

(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING

INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS

FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.

THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST

HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A

COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN

RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTATLLED AND USED IN

ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL

INTERFERENCE TO RADIO COMMUNICATIONS.

OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE

HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO

CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.

Notice

This guide is designed for experienced users to setup the system within the shortest time.

For detailed information, please always refer to the electronic user's manual.

No part of this document may be reproduced, copied, translated, or transmitted in any form

or by any means, electronic or mechanical, for any purpose, without the prior written

permission of the original manufacturer.

A Message to the customer

Avalue Customer Services

Each and every Avalue’s product is built to the most exacting specifications to ensure

reliable performance in the harsh and demanding conditions typical of industrial

environments. Whether your new Avalue device is destined for the laboratory or the factory

floor, you can be assured that your product will provide the reliability and ease of operation

for which the name Avalue has come to be known.

EMX-B75 Quick Installation Guide

EMX-B75 Quick Installation Guide 3

Your satisfaction is our primary concern. Here is a guide to Avalue’s customer services. To

ensure you get the full benefit of our services, please follow the instructions below carefully.

Technical Support

We want you to get the maximum performance from your products. So if you run into

technical difficulties, we are here to help. For the most frequently asked questions, you can

easily find answers in your product documentation. These answers are normally a lot more

detailed than the ones we can give over the phone. So please consult the user’s manual

first.

To receive the latest version of the user’s manual; please visit our Web site at:

http://www.avalue.com.tw/

Headquarters and Branch

Avalue Technology Inc.

7F, 228, Lian-cheng Road, Zhonghe Dist., New Taipei City 235, Taiwan

Tel: +886-2-8226-2345 Fax: +886-2-8226-2777

Information: sales@avalue.com.tw Service: service@avalue.com.tw

Avalue USA

Avalue Europe

Avalue Technology Inc.

9 Timber Lane, Marlboro, NJ 07746-1443

Tel: (732) 414-6500

Fax: (732) 414-6501

Information: sales@avalue-usa.com

Service: support@avalue-usa.com

Avalue Europe A/S

Moelledalen 22C, 3140

Aalsgaarde, Denmark

Tel: +45-7025-0310

Fax:+45-4975-5026

Information: sales.e[email protected].tw

Service: service.europ[email protected].tw

BCM Advanced Research

Avalue China

BCM Advanced Research

an Avalue Company

7 Marconi, Irvine, CA92618

Tel: +1-949-470-1888

Fax: +1-949-470-0971

Information: BCMSales@bcmcom.com

Web: www.bcmcom.com

Avalue Technology Inc.

Room 805, Building 9,No.99 Tianzhou Rd.,

Caohejing Development Area,

Xuhui District, Shanghai

Tel: +86-21-5169-3609

Fax:+86-21-5445-3266

Information: sales.c[email protected].cn

Service: service@avalue.com.tw

EMX-B75 Quick Installation Guide

4 EMX-B75 Quick Installation Guide

1. Getting Started

1.1 Safety Precautions

Warning!

Always completely disconnect the power cord from your

chassis whenever you work with the hardware. Do not

make connections while the power is on. Sensitive

electronic components can be damaged by sudden power

surges. Only experienced electronics personnel should

open the PC chassis.

Caution!

Always ground yourself to remove any static charge before

touching the CPU card. Modern electronic devices are very

sensitive to static electric charges. As a safety precaution,

use a grounding wrist strap at all times. Place all electronic

components in a static-dissipative surface or static-shielded

bag when they are not in the chassis.

Always note that improper disassembling action could cause damage to the

motherboard. We suggest not removing the heatsink without correct

instructions in any circumstance. If you really have to do this, please contact

us for further support.

1.2 Packing List

Before you begin installing your single board, please make sure that the

following materials have been shipped:

Quick Installation Guide X 1

Driver/Utility CD X 1

Serial ATA Signal Cable X 1

IO Shield

COM Cable X 1

VGA Cable X 1

Screw X 2

Motherboard X 1

EMX-B75 Quick Installation Guide

EMX-B75 Quick Installation Guide 5

2.Hardware

Configuration

EMX-B75 Quick Installation Guide

6 EMX-B75 Quick Installation Guide

2.1 Product Overview

EMX-B75 Quick Installation Guide

EMX-B75 Quick Installation Guide 7

2.2 Jumper and Connector List

You can configure your board to match the needs of your application by setting jumpers. A

jumper is the simplest kind of electric switch.

It consists of two metal pins and a small metal clip (often protected by a plastic cover) that

slides over the pins to connect them. To “close” a jumper you connect the pins with the clip.

To “open” a jumper you remove the clip. Sometimes a jumper will have three pins, labeled 1,

2, and 3. In this case, you would connect either two pins.

The jumper settings are schematically depicted in this manual as follows:

A pair of needle-nose pliers may be helpful when working with jumpers.

Connectors on the board are linked to external devices such as hard disk drives, a

keyboard, or floppy drives. In addition, the board has a number of jumpers that allow you to

configure your system to suit your application.

If you have any doubts about the best hardware configuration for your application, contact

your local distributor or sales representative before you make any changes.

The following tables list the function of each of the board’s jumpers and connectors.

Jumpers

Label

Function

Note

JS1/JS2

mSATA/Mini PCIe function Jumper

3 x 1 header, pitch 2.00 mm

JBAT

Clear CMOS

3 x 1 header, pitch 2.00 mm

JME

ME update

2 x 1 header, pitch 2.00 mm

JC11/31/41/51/61

Serial port 1/3/4/5/6 –Normal, 5V,12V

PIN 9 selector

3 x 2 header, pitch 2.00 mm

JRS_1

Serial port 2 in RS-422-485 mode

3 x 1 header, pitch 2.00 mm

JRS_2

Serial port 10 in RS-422-485 mode

3 x 1 header, pitch 2.00 mm

JKB_MS

PS/2 keyboard & mouse connector

5 x 2 header, pitch 2.54 mm

JKB

Keyboard power select jumper

3 x 1 header, pitch 2.00 mm

JDIMM

DDR3L using

2 x 1 header, pitch 2.00 mm

EMX-B75 Quick Installation Guide

8 EMX-B75 Quick Installation Guide

Connectors

Label

Function

Note

ATXPWR1

ATX Power Input Connector

10 x 2 header, pitch 4.20 mm

PWR12V

Power connector

2 x 2 wafer, pitch 4.20 mm

FPANEL

Front Panel Switches

8 x 2 header, pitch 2.54 mm

JSPDIF1

Sony/Philips Digital Interface

3 x 1 header, pitch 2.54 mm

JLPT

Printer

2 x 13 header, pitch 2.54 mm

HDMI

HDMI connector

DVI-D

DVI-D connector

F_AUDIO

Front Panel Audio Connection Header

2 x 5 header, pitch 2.54 mm

AUDIO

Audio connector

COM1_3

Serial port 1_3 connector

COM2/10

Serial port 2/10 connector

4 x 1 header, pitch 2.54 mm

COM4~9

Serial port 4~9 connector

5 x 2 header, pitch 2.00 mm

JGPIO1

General Purpose I/O

6 x 2 header, pitch 2.54 mm

USBLANA/B

USB and RJ45LAN Connector A/B

PS/2

Keyboard and Mouse

F_USB1/2

USB Connector 1/2 - USB2.0

5 x 2 header, pitch 2.54 mm

F_USB3

USB Connector 3 - USB3.0

10 x 2 header, pitch 2.00 mm

SATA2~6

Serial ATA connector 2~6

SFAN1

System Fan connector

3 x 1 wafer, pitch 2.54 mm

CFAN1

CPU Fan connector

4 x 1 wafer, pitch 2.54 mm

JVGA

VGA connector

5 x 2 header, pitch 2.54 mm

MPCIE1

Mini-PCIe

DIMM1

DDR3 SODIMM connector1

DIMM2

DDR3 SODIMM connector2

EMX-B75 Quick Installation Guide

EMX-B75 Quick Installation Guide 9

2.3 Setting Jumpers & Connectors

2.3.1 mSATA/Mini PCIe function Jumper (JS1/JS2)

* Default

JS1

JS2

MPCIE* MSATA

Define

1-3

2-4

M-SATA

3-5

4-6

MINIPCIE

2.3.2 Clear CMOS (JBAT)

* Default

Normal*

Clear

Define

1-2

Normal

2-3

Clear

JS2

JS1

EMX-B75 Quick Installation Guide

10 EMX-B75 Quick Installation Guide

2.3.3 ME update (JME)

* Default

Refresh the ME*

Can’t refresh the ME

2.3.4 Serial port 1/3/4/5/6 –Normal, 5V, 12V PIN 9 selector (JC11/31/41/51/61)

* Default

Normal*

12V

Define

1-2

Normal

3-4

5-6

12V

JC11

JC31

JC41

JC51

JC61

Tabla de contenidos

Otros manuales de Placa madre de Avalue Technology

Avalue Technology

Avalue Technology EAX-C246P Manual de usuario

Avalue Technology

Avalue Technology ECM-BSWA Manual de usuario

Avalue Technology

Avalue Technology EAX-915GV Manual de usuario

Avalue Technology

Avalue Technology EPI-QM87 Manual de usuario

Avalue Technology

Avalue Technology EMX-CDV Manual de usuario

Avalue Technology

Avalue Technology EMX-BSWP Manual de usuario

Avalue Technology

Avalue Technology ERX-G41 Manual de usuario

Avalue Technology

Avalue Technology EMX-H110KP Manual de usuario

Avalue Technology

Avalue Technology EMX-QM57 Manual de usuario

Avalue Technology

Avalue Technology EMX-ZXEDP Manual de usuario

Avalue Technology

Avalue Technology EAX-H110KP Manual de usuario

Avalue Technology

Avalue Technology EMX-Q170KP-B1R Manual de usuario

Avalue Technology

Avalue Technology ACP-IMX6POS-B1 Manual de usuario

Avalue Technology

Avalue Technology EMX-CDD Manual de usuario

Avalue Technology

Avalue Technology ECM-A50M B1 Manual de usuario

Avalue Technology

Avalue Technology EAX-Q45 Manual de usuario

Avalue Technology

Avalue Technology EMX-ADLP-B1 Manual de usuario

Avalue Technology

Avalue Technology ECM-QM77 Manual de usuario

Avalue Technology

Avalue Technology ECM-APL2 Manual

Avalue Technology

Avalue Technology EPI-QM87R Manual de usuario

Avalue Technology

Avalue Technology EMX-A55E Manual de usuario

Avalue Technology

Avalue Technology EMX-Q87 Manual de usuario

Avalue Technology

Avalue Technology EAX-785E Manual de usuario

Avalue Technology

Avalue Technology EAX-W480P Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario