Autoscript EPIC-IP19XL Manual de usuario
User Guide
EPIC-IP19XL
EPIC-IP19
EPIC-IP17
EPIC-IP15
EVO-IP19
EVO-IP17
EVO-IP15
Intelligent Prompting Monitors and Accessories
EN www.autoscript.tv
www.progl-gerlach.de
Intelligent Prompting System
Copyright © 2017
All rights reserved.
Original Instructions: English
All rights reserved throughout the world. No part of this publication may be stored in a retrieval system, transmitted, copied or reproduced in any
way, including, but not limited to, photocopy, photograph, magnetic or other record without the prior agreement and permission in writing of the Vitec
Group Plc.
Disclaimer
The information contained in this publication is believed to be correct at the time of printing. Vitec Videocom Ltd reserves the right to make changes
of the publication.
Should this publication not contain information on the core functionality of your product, please let us know. You may be able to access the latest
revision of this publication from our website.
Trademarks
All product trademarks and registered trademarks are the property of The Vitec Group Plc.
All other trademarks and registered trademarks are the property of their respective companies.
Published by:
Vitec Videocom Ltd
Email: [email protected]
Contents Software Download
Safety................................................2
About this User Guide ................................3
Components and Connections ...........................4
...........................4
Mounting Kit ........................................6
Robotic Upgrade Kit..................................7
Monitor Setup .........................................8
....................8
.............9
...........10
Attach the Hood to Prompt Monitor .....................12
..13
Monitor Conguration .................................14
.........................14
........................17
..................................17
Monitor Troubleshooting ...............................18
Installation...........................................19
...............19
Attach hood & monitor assembly onto the rail..............22
...............................24
Technical Specication ................................26
Maintenance .........................................30
General Notices ......................................31
below:
The version downloaded will be a demonstration version only.
No devices can be added to prompt until a registered valid serial
number is entered. This is provided on our purchase delivery note.
After downloading the software you will be directed to the registration
page where you will enter the Machine ID to generate the license.
The Machine ID must be from the PC which will be running
WinPlus-IP otherwise the license will be void.
Important Please Read! Information for
downloading WinPlus-IP software
2
Safety
Important information on the safe installation and operation of
this product. Read this information before operating the product.
For your personal safety, read these instructions. Do not operate
the product if you do not understand how to use it safely. Save
these instructions for future reference.
Warning Symbols Used in these Instructions
Safety cautions are included in these instructions. These safety
instructions must be followed to avoid possible personal injury and
avoid possible damage to the product.
!
WARNING!
Where there is a risk of personal injury or injury to others,
comments appear supported by the warning triangle
symbol.
Where there is a risk of damage to the product,
associated equipment, process or surroundings,
comments appear supported by the word ‘CAUTION’.
ELECTRIC SHOCK
Where there is a risk of electric shock, comments appear
supported by the hazardous voltage warning triangle.
Basic Electrical Insulation (Class 1 Equipment)
Intended Use
high quality teleprompting facility for television broadcasting.
The prompter is intended for use by television camera operators
within a TV studio environment or on outside broadcasts (OB) when
protected from weather by a suitable waterproof cover.
Electrical Connection
WARNING!
operation this equipment must be connected to a power
supply that has a protective earth connection (US: ground).
WARNING! Risk of electric shock. Always disconnect
and isolate the product from the power supply before
attempting any servicing or removing the covers.
!
CAUTION! The products must be connected to a power
supply of the same voltage (V) and current (A) as indicated
the products
!
CAUTION!
!
CAUTION! Using alternative power sources will invalidate
3
Safety
Mounting and Installation
!
WARNING! Always ensure that all power and auxiliary
communications cables are routed so that they do not
present any danger to personnel. Take care when routing
cables in areas where robotic equipment is in use.
Water, Moisture and Dust
!
WARNING! Protect the product from water, moisture
and dust. The presence of electricity near water can be
dangerous.
!
WARNING! When using this product outside, protect from
rain using a suitable waterproof cover.
Ventilation
!
WARNING! Slots and openings are intended for ventilation
purposes to ensure reliable operation of the product, and
protect it from overheating. Do not block or cover any slots
and openings.
Operating Environment
!
CAUTION! The product should not be used outside the
operating temperature limits. Refer to the product technical
Cleaning
WARNING! Risk of electric shock. Always disconnect
and isolate the product from the power supply before
cleaning.
!
CAUTION!
abrasives or wire brushes.
Maintenance
!
WARNING! Servicing or repair of this product must only
!
WARNING!
alterations or servicing can be dangerous and could affect
the safety of the product. It may also invalidate the terms
and conditions of the product warranty.
!
WARNING! Suffocation hazard. Store all packaging
material out of reach of children.
About this User Guide
range of prompters onto a suitable camera support as part of a full
prompting system.
4
Components and Connections
Prompt Monitor Connections
1
2SDI In Prompt Monitor
3SDI In Talent Monitor
4Tally I/O Port
5Power switch
6
7
8
9Ethernet port
SDI
12-16.8V
CVBS LTC
PTTALLY
SDI
12-16.8V
CVBS
PTTALLY
1
234 5
68
79
1
2Prompt M
1
2
EPIC 15”, 17”, 19” or 19XL
EVO 15”, 17” or 19”
5
Components and Connections
1
2
1
2
3
3
6
Components and Connections
2
3
4
1Rail
2
3
4Hex Key x2
1
Mounting Kit
7
Components and Connections
Robotic Upgrade Kit
1
2
33/8 Bolt x 2
43/8 Screw Hex Head x 3
53/8 Washer Plain x 2
6
1
2
6
3
4
5
robotic installations.
8
Fit CLOCKPLUS-IP to Talent Monitor
1. Remove the two screws that secure blanking plate and lift off the
plate.
2.
the talent monitor under the hinge.
X 2
X 2
123
3.
screw positions and then secure with the 2 x M3 countersunk screws
supplied.
Note!
camera number information.
Monitor Setup
To connect the ribbon cable: see Fit Talent Monitor to
EVO-IP Prompt Monitor on page 9
Este manual sirve para los siguientes modelos
6
Tabla de contenidos
