To avoid body hurt and damage to the device or your car, please read
this manual carefully before using ES910.
The general testing process described in this manual is got by
technologist’s experience. Safety precaution is required in most of the
process to avoid body hurt and damage to the device or your car.
Prior to your using this device, please read vehicle maintenance code
and follow the safety precautions. Keep mention to the following
general safety precautions.
It generates CO and other poisonous air when engine run. To avoid this
kind of hurt, please repair the car in a well-air-ventilated location.
When an engine is running, many parts (such as the coolant fan,
pulleys, fan belt etc.) turn at high speed. To avoid serious injury, always
be aware of moving parts. Keep a safe distance from these parts as well
as other potentially moving objects.
Engine parts become very hot when the engine is running. To prevent
severe burns, avoid contact with hot engine parts.
Connecting or disconnecting test equipment when the ignition is ON
can damage test equipment and the vehicle's electronic components.
Turn the ignition OFF before connecting the ES910 or disconnecting
the ES910 from the vehicle's Data Link Connector (DLC).
Fuel and battery vapors are highly flammable. To prevent an explosion,
keep all sparks, heated items and open flames away from the battery
and fuel/ fuel vapors. DO NOT SMOKE NEAR THE VEHICLE DURING
TESTING.
SAFETY PRECAUTIONS
2
