Autophix V007 Manual de usuario
To avoid body injury and damage to the device or your car, please
read this manual carefully before using V007.
The testing process described in the manual is generally the experience of
technician. Safety precaution is required in most of the process to avoid
body injury and damage to the device or your car. Read the vehicle
maintenance manual before use this device and follow safety precautions.
1
It generates CO and other poisonous air when engine is running. To avoid
this kind of hurt, please repair the car in a well-air-ventilated place.
When the engine is running, many parts (such as the coolant fan, pulleys,
fan belt etc.) rotate at high speed. To avoid serious injury, always be
aware of moving parts. Keep a safe distance from these parts as well as
other potentially moving objects.
Engine parts become very hot when the engine is running. Don’t touch hot
engine parts to avoid severe burns.
When the ignition is ON, Connecting or disconnecting test equipment will
damage test equipment and the vehicle's electronic components. Turn the
ignition OFF before connecting or disconnecting the device from the
vehicle's Data Link Connector (DLC).
Fuel and battery vapors are highly flammable. To prevent an explosion,
keep all sparks, heated items and open flames away from the battery and
fuel/ fuel vapors. Do not smoke near the vehicle during testing.
Safety precautions
EN
1. Coverage
2. Specifications
1) V007 covers all 12V models.
2) It can test all protocols of UDS, TP20, TP16, KWP2000 and KWP1281.
1) Display: Backlit, 128 × 64 pixels display with contrast adjustment
2) Operating Temperature: 0 to 60°C (32 to 140 F°)
3) Storage Temperature: -20 to 70°C (-4 to 158 F°)
4) External Power: 8.0 to 18.0 V power provided via vehicle battery
5) Dimensions: 125 X 70 X 22mm
3. Included
1) Scan Tool main unit
2) User’s Manual
3) USB cable
2
1.1 Supports for VW, AUDI, SKODA and SEAT, etc.
Basic functions:
Read version information
Erase fault codes
Read fault codes
Special functions:
Throttle Adaptation
EPB Replace Brake pads
Service reset
1.2 Function Coverage
About V007
EN
4.Tool Description
1. LCD DISPLAY – Indicate test results. Backlit, 128 x 64 pixels display
with contrast adjustment.
2. ENTER BUTTON – Confirm a selection (or action) from a menu.
3. EXIT BUTTON – Cancel a selection (or action) from a menu or returns
to the menu. It is also used for exit DTC Lookup screen.
4. UP SCROLL BUTTON – Move up through menu and submenu items in
menu mode. When more than one screen of data is retrieved, move up
through the current screen to the previous screens for additional data.
5. DOWN SCROLL BUTTON – Move down through menu and submenu
items in menu mode. When more than one screen of data is retrieved,
move down through the current screen to next screens for additional data.
6. OBD II CONNECTOR – Connect the scan tool to the vehicle’s Data
Link Connector (DLC).
3
ENTER EXIT
1
6
3
5
4
2
EN
1. Connect V007
2. V007 Features
2.1 V / A
Choose [V/A Diagnosis] then press [ENTER] button. The screen will display
as follows:
4
1.1 Turn the ignition on.
1.2 Locate the vehicle's 16-pin Data Link Connector (DLC).
1.3 Main menu
V/ A Diagnosis
OBDII Diagnosis
Review DTC
System Setup
Operation instructions
Main Menu
V/A Diagnosis
OBDII Diagnosis
Review DTC
System Setup
Main Menu
V/A Diagnosis
OBDII Diagnosis
Review DTC
System Setup
V/A Diagnosis
Common system
V/A A11 Systems
Service Reset
Throttle Adaptation
EPB Replace Brake Pads
EN
AUTOPHIX
www.autophix.com
SW V8.60 HW V1.1B
2.1.2 Read Fault Codes
Choose [02-Read Fault Codes] then press [ENTER] button. The screen
will display fault codes as below:
Move [up] or [down] button to check fault code.
2.1.1 Read ECU Info
Choose [01-Control Unit Info] then press [ENTER] button. It will display as
follows:
Press the following Engine system it will display as below:
Select [01- Engine], press [ENTER] button will enter the engine diagnostic
interface
5
Trouble Codes
Total Codes ：09
Fault Codes ：09
01--Engine
01--Control Unit Info
02--Read Fault Codes
05--Clear Fault Codes
01--Engine
01--Control Unit Info
02--Read Fault Codes
05--Clear Fault Codes
Part NO: 06G906057G
Component: 2.01 88KW
3311
COD: 0000075
IMP: 666
WSC: 19460
Extra: 01231
EN
V/A Diagnosis
01--Engine
02--Auto Trans
03--ABS Brakes
08--Auto HVAC
09--Cent Elect
15--Airbass
Deteoting Protocol
Waiting for vehicle
to respond
TP2.0_CAN
6
2.1.4 Service reset
Choose [Service reset] and then press [ENTER] button. The screen will
display as follows:
2.1.3 Clear Fault codes
Choose [05-Clear Fault Codes]. The screen will display as follows:
V/A Diagnosis
Common system
V/A A11 Systems
Service Reset
Throttle Adaptation
EPB Replace Brake Pads
Service Reset
Oil Service
Inspeotion Service
Reset ESI
ESI: Distance inspect
FIX: Distance inspect
ESI: Time inspect
V/A Diagnosis
Common system
V/A A11 Systems
Service Reset
Throttle Adaptation
EPB Replace Brake Pads
Precondition
1.The ignition switch on.
Trouble-free
2.The engine is not running
3.The water temperature
above 85 degrees
2.1.5 Throttle Adaptation
Choose [Throttle Adaptation] then press [ENTER] button. The screen will
display as the follows:
01--Engine
01--Control Unit Info
02--Read Fault Codes
05--Clear Fault Codes
Erase Codes
Erase trouble codes!
Are you sure?
YES NO
EN
Main Menu
V/A Diagnosis
OBDII Diagnosis
Review DTC
System Setup
OBDII Diagnosis
Read Fault Codes
Erase Codes
Read VIN
System protocol
V/A Diagnosis
Common system
V/A A11 Systems
Service Reset
Throttle Adaptation
EPB Replace Brake Pads
Precondition
1. Turn on the ignition switch.
2. Don’t start the car.
3. Release the handbrake.
7
2.2 OBDII
Choose [OBDII Diagnosis] then press [enter] button. The screen will
display as follows:
2.1.6 EPB Replace Brake pads
Choose [EPB Replace Brake pads] then press [ENTER] button.
The screen will display as follows:
2.2.1 Read Fault codes
This function read DTCs from the vehicle's computer modules, there are
two types of codes: Malfunction Indicator Lamp(MIL) Codes and pending
codes MIL Codes: These codes cause the computer to illuminate the MIL
when an emission related or drive ability fault occurs. The MIL is also
known as the “service Engine Soon” or “Check Engine Lamp” MIL codes
remain in the vehicle's memory until the fault is repaired.
Select [Read Fault Codes] and press [ENTER] button, The V007retrieves
the DTCs stored in the vehicle's computer modules. If there is fault, the
number of fault codes will be displayed as follows:
EN
OBDII Diagnosis
Read Fault Codes
Erase Codes
Read VIN
System protocol
Trouble Codes
Total Codes ：07
Fault Codes ：00
Pend Codes ：07
OBDII Diagnosis
Read Fault Codes
Erase Codes
Read VIN
System protocol
Erase Codes
Erase trouble codes!
Are you sure?
YES NO
Hing Speed CAN
Communication Bus
Performance
U0002 Pend 1/7
OBDII
Throttle / Pedal
Position Sensor /
Switch A Circuit Low
U0002 Pend 2/7
OBDII
8
Press [ENTER] to view trouble codes. if there are more than two fault
code, you can press up or down button to choose and read fault codes.
2.2.2 Erase Codes
Select [Erase Codes] and press the [ENTER] button. The screen will
display as follows:
2.2.3 Read VIN codes
Select [VIN Codes] and press the [ENTER] button.
EN
Tabla de contenidos
Idiomas:
Otros manuales de Equipo de diagnóstico de Autophix
