ausdom AD250 Manual de usuario
FHD 1080P
Car DVR Dash Cam
Instruction Manual
AD 250
CONTENTS
Introduction
Package Contents
Features
Appearance
Safety Precautions
About the unit
About the car charger
About the mounting location
About backing up data
Mounting the Unit
Inserting the Memory Card
Connecting to Power
LED/Charging LED Indicators
Power the Unit On and Off
Power Indication
Video Recording
Taking Photos
Video Menu Configurations
Still Menu Configurations
Specifications
2
2
2
3
4
4
4
4
4
5
6
6
7
7
8
8
9
11
14
16
Introduction
Package Contents
Thank you for purchasing the AD 250 Car DVR Dash Cam. This car
camera is designed to capture real-time video of any events
happening when you are driving (and even when or dashboard. With
a 120° wide angle lens for the best field of view, you can be sure to
capture any the important events that happen around you or your
vehicle. The camera records video in Full HD 1080P and features up
to 32GB storage (via micro SD card).
This manual will give you the instructions and information about the
AD 250. Please read it carefully before using the AD 250, and keep it
properly for future reference.
- AD250 Car DVR Recorder *1
- Car Charger *1
- Mounting Bracket *1
- Charging Cable *1
- User Manual *1
- Mini size, 120°wide viewing angle
- 2.0 inch HD LCD display
- 1/4 inch color CMOS 2.0 mega-pixel high resolution sensor
- 4 layers fixed focus lens. Focusing range: 60cm to Infinity
- Compatible with TF (high speed microSD – called an SDHC card)
memory card up to 32GB. Memory card is not included in the package.
- SOS Button. You can protect the current recording by pressing the
SOS button to instantly save the file.
- Loop recording
- Motion detection
- Seamless recording
- Auto screen saver (wake up screen by any button on panel)
- Select cycle recording time
- Low power warning and auto power off to save videos.
- Auto power on and record while auto engine started
- Time-lapse power off after disconnecting with car power
- Instant mute function
- Video restore function if damaged
- WDR conducting balancing light automatically in the shooting process
- Built in microphone and speaker
- Built in G-sensor
- Built in 180 mAh rechargeable lithium battery
- Parking Monitor: Collision or shaking will trigger to start recording
- Ten on screen menu languages to choose from
Features
1. Micro USB interface
2. Power button/Night vision light
3. Menu /Back button
4. MODE/PIV
5. Reset button
6. Next/SOS
7. Prev/MIC
8. Record/OK
9. TF insert
10. HD out
Appearance
- Mini size, 120°wide viewing angle
- 2.0 inch HD LCD display
- 1/4 inch color CMOS 2.0 mega-pixel high resolution sensor
- 4 layers fixed focus lens. Focusing range: 60cm to Infinity
- Compatible with TF (high speed microSD – called an SDHC card)
memory card up to 32GB. Memory card is not included in the package.
- SOS Button. You can protect the current recording by pressing the
SOS button to instantly save the file.
- Loop recording
- Motion detection
- Seamless recording
- Auto screen saver (wake up screen by any button on panel)
- Select cycle recording time
- Low power warning and auto power off to save videos.
- Auto power on and record while auto engine started
- Time-lapse power off after disconnecting with car power
- Instant mute function
- Video restore function if damaged
- WDR conducting balancing light automatically in the shooting process
- Built in microphone and speaker
- Built in G-sensor
- Built in 180 mAh rechargeable lithium battery
- Parking Monitor: Collision or shaking will trigger to start recording
- Ten on screen menu languages to choose from
5
8
7
6
2
3
4
9
10
1
Safety Precautions
About the unit
- Do not disassemble or modify the unit by yourself. Contact the dealer
for help when the unit is failed to work.
- Do not press hard on the LCD screen that will cause the unit
malfunction.
- Do not clean the unit with cleaners containing strong acid or alkaline.
- Avoid using or storing the unit in an extreme temperature environment
or exposing to sunlight directly.
- Avoid using the unit in the environment with strong magnetic wave or
excessive vibration.
- Store the unit in a dry place away from moisture.
- In order to avoid the car's lighter socket to continue supplying power
when the car's engine is turned off or idled. Unplug the unit to reduce
unnecessary power consumption and avoid any unexpected problems.
About the car charger
- Only use the car charger or adapter provided with the camera to
avoid malfunction.
- Avoid damage, please do not constantly plug in and remove the car
charger.
- Do not touch the car charger with wet hands.
About the mounting location
- Mount the unit with constantly in the range between the windshield
wipers to ensure clear visibility in a rainy day.
- Do not place the unit where obstructing the driver’s view or deployment
of airbags.
About backing up the data
- Do not remove the memory card during operating to avoid file damage.
- To avoid the loss of data caused by improper use, it is recommended
to back up the data pre-saved in micro SD card to a computer or other
storage device before using this unit.
1. Clean and dry thoroughly the windshield area where you want to mount
the unit. (Refer to Picture 1)
Note: Dirty and moist glass will cause the mounting bracket can not be
firmly mounted on the windshield.
2. Insert the mounting bracket into the mount socket located on the top
of the unit and slide sideways until the mounting bracket is mounted on
the unit firmly. (Refer to Picture 2)
3. Turn the adjustment knob counter-clockwise to loosen and then
adjust the unit to a suitable angle. (Refer to Picture 3)
4.Find the best position on the windshield to mount the unit. Peel off
the protective film from the mounting bracket’s foam sticker and move
the rotatable knob clockwise until you hear a click to ensure the unit
firmly mounted on the windshield. (Refer to Picture 4)
Mounting the Unit
Picture 1
Windshield
Picture 2
Picture 3 Picture 4
Mount Bracket Car DVR Recorder
Note: For the best field of view, it is better to mount the unit in the
middle of the windshield near the rear-view mirror.
1. Connect the small end of the power/transmission cable to the USB
connector located on the side of the unit.
2. Connect the other end of the power/transmission cable to the
included car charger. (Picture 7)
3. Plug the included car charger into the car’s lighter socket. (Picture 8)
4. The unit will power on and start recording automatically after your
car engine is starting.
5. When the car engine is turned off, the unit will automatically power
off after saving the recordings.
3. To remove the memory card, push to eject memory card out of the slot.
Note:
- Make sure the memory card has been formatted before using.
- Do not remove the memory card during recording.
- You have to insert the memory card into the camera before connecting
the camera to the power supply.
- For best results, use the format function of the car camera to prepare
your memory card.
Inserting the Memory Card
Connecting to Power
1. Before starting to record, you have to insert a Class 6 or above
micro SD card with up to 32GB capacity into the slot located on the
side of the unit. (Refer to Picture 5)
Memory Card
Picture 5 Picture 6
2. Press button twice to enter Setup setting, press the or
button to select “Format” item and press button to format the
memory card. (Refer to Picture 6)
Note:
- The unit can be recharged and connected to the car’s lighter socket,
PC or USB power supplier with the included cable. When the unit is
connected to a PC, it can only be used for transferring files. You will
not be able to use any of the unit’s features at this time. Please
disconnect the unit from the PC to resume normal function.
- Only use the included car charger with 5V output to charge the unit.
Non-compliant car charger will damage the unit and cause malfunction.
The unit provides you the LED and charging LED indicators located on
the top of the screen that specifying the unit current status.
1. Power On: Press the power button located on the side of the unit.
2. Power Off: Press and hold the power button located on the side of the
unit for 3 seconds.
3. Auto Power On and Off: You have to enable the “Auto Power” feature
in the menu configurations to process Auto Power On/Off function. The
unit will automatically power off if no action during the configured time.
Note:
The unit will automatically power on when you connect the unit to the power
supplier via charging cable for charging. Relatively, the unit will power off
automatically when you unplug the charging cable to stop charging.
LED/Charging LED Indicators
Power the Unit On and Off
Picture 8
Picture 7
Car Charger
Charging Cable
Solid Red
Flashing Blue Once
Charging
Taking a photo
Flashing Blue Recording
Charging LED Status Definition
LED Status Definition
Note:
When the device crashes, you can press the Reset button located on
the side of your unit to restore all settings to factory default settings
and reboot.
The unit provides you a battery indication appeared on the bottom left
of the screen clearly so that you can understand the current battery
status. (Refer to Picture 9)
Note:
- Whether the unit is in the power on or power off status that will not
affect the charging.
- When the battery is running out of power (low power status), the unit
will show “Low Battery” warning message on the screen and power off
immediately. (Refer to Picture 10)
Power Indication
Video Recording
Normal Recording
Picture 9
Picture 10
After the car engine is starting, the unit will automatically power on and
start recording. Or you can press button to start recording and press
once to stop manually.
You can configure the recording length for saving. Refer to Loop
Record for more information. After the car engine is off, the unit will
automatically save the current recording and power off.
EN 9
Note:
- In the Recording Mode, you can press button to enable or disable
the microphone function.
- You can choose White Day Mode or Night Mode to improve the quality
of photography by pressing power button once. The icon or will show
on the upper middle of screen.
Event Recording
Taking Photos
1. Press button on the left side of the unit to Still Mode. Icon
shows on the upper left screen.
2. Press and to adjust the digital zoom.
3. Press button to take a photo. The LED flashes blue once.
Picture 11
Battery indication
Memory card
Resolution
Recording time
White day
Microphone(on)
Recording
Video mode
Loop recording in
2 mins lengths
Motion detection
Exposure
Date/Time
Picture 12
Recycle Record
Event
Saving
Emergency Recording
20 Secretary
Recording
Normal RecordingNormal Recording
Locked File
If the Event Recording function is enabled, in the Recording Mode,
the unit records the event and saves it automatically. Or you can
press and hold the button to manually activate emergency
recording. The recorded files are protected not be overwritten. (Refer
to Picture 12)
Tabla de contenidos
Otros manuales de Cámara de salpicadero de ausdom
