1.5.7 HYDRAULIC CIRCUIT
A two-bodies gear pump with a 6 cc flow body for steering and a 8 cc flow body for the
auxiliaries in standard machine and 8 cc flow body for steering an 18 cc for the auxiliaries
in machine with Continuous and high flow (at 1500 rpm) connected to the hydrostatic
pump.
Two spool control valve and 1 solenoid selector for moving the auxiliary hydraulic take-off
(if fitted).
Maximum service pressure: 240 bar.
32 l hydraulic fluid tank.
1.5.8 CAPACITY/DIMENSIONS
Unladen weight (with full tanks): 2400 kg. See machine identification plate.
Nominal load: 1350 kg.
Maximum height for lifting: 4000 mm
Rotation of the fork carriage (with the arm horizontal): from +68 º to -12º
Pay Load at maximum height and with load center at 500 mm. or 600 mm
Standard: 1350 Kg
Fork carriage with side-shift: 1250 Kg
Fork carriage with hydraulic quick attach: 1150 Kg
Fork carriage with hydraulic quick attach and side-shift: 1000 Kg
Maximum Weight, 3500 kg. See machine identification plate.
Total width, 4WD version: 1410 mm
Maximum gradient (fully loaded) 26%
Outer turning radius (mm) for the 4WD version: 2982 mm
1.5.9 FORKS
Floating
Dimensions: 1000 x 100 x 35 mm
1.5.10 ELECTRICAL EQUIPMENT
Electrical starting motor of 1.0 Kw
- 12V /70Ah battery.
- 12V / 360W alternator.
- Diesel pre-heating plugs.
- Rotating beacon
- Horn
- Acoustic warning for reverse direction.
1.5.11 VIBRATION AND NOISE LEVELS
Sound level:
Guaranteed sound level (as per directive 2000/14/EC on noise emission in the
environment by equipment for use outdoors):
• Lwa = 103 dB (A)
Acoustic pressure in the operator’s cab:
Weighted sound level (A) measured as per standards EN 12053 and ISO 4871:
• Lpa = 85 dB (A)
• Measuring uncertainty: 2.56 dB (A)
Level of vibrations generated by the machine:
Mean quadratic value weighted on the basis of the acceleration applied to the upper
members: < 2.5 m/s2
Mean quadratic value weighted on the basis of the acceleration applied to the body:
< 0.5 m/s2.
TAURULIFT T144H x4 Plus
