AURES YUNO-K215-BLACK Manual de usuario
Rev.A
YUNO-K215-BLACK I ART-03558
USER’S MANUAL
FCC Notice
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of the Federal Communications Commission
(FCC) Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio or television technician for help.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR
TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
DEVICE. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO
OPERATE THE DEVICE.
CE Notice
This device complies with EMC Directive 2004/108/EC and 2006/95/EC “Low
Voltage Directive” issued by the Commission of the European Community.
WEEE Notice
The WEEE mark applies only to countries within the European Union (EU) and
Norway.
This appliance is labeled in accordance with European Directive 2002/96/EC
concerning waste electrical and electronic equipment (WEEE). The Directive
determines the framework for the return and recycling of used appliances as
applicable throughout the European Union. This label is applied to various
products to indicate that the product is not to be thrown away, but rather
reclaimed upon end of life per this Directive.
Safety
IMPORTANT SAFETY INSTRUCTIONS
To disconnect the machine from the electrical Power Supply, turn off the
power switch and remove the power cable plug from the wall socket.
The wall socket must be easily accessible and in close proximity to the
machine.
Read these instructions carefully. Save these instructions for future
reference.
Follow all warnings and instructions marked on the product.
Do not use this product near water.
Do not place this product on an unstable cart, stand, or table. The product
may fall, causing serious damage to the product. Slots and openings in
the cabinet and the back or bottom are provided for ventilation; to ensure
reliable operation of the product and to protect it from overheating. These
openings must not be blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug, or other similar surface.
This product should never be placed near or over a radiator or heat
register, or in a built-in installation unless proper ventilation is provided.
This product should be operated from the type of power indicated on the
marking label. If you are not sure of the type of power available, consult
your dealer or local power company.
Do not allow anything to rest on the power cord. Do not locate this product
where persons will walk on the cord. Never push objects of any kind into
this product through cabinet slots as they may touch dangerous voltage
points or short out parts that could result in a re or electric shock. Never
spill liquid of any kind on the
product.
Table of Contents
Package Overview ................................................................................................ 2
Product Overview ................................................................................................. 3
Specication .......................................................................................................... 4
How to start the module......................................................................................... 6
How to Install YUNO board to YUNO-K215-BLACK ............................................. 7
How to Install or Remove the Mylar....................................................................... 7
Attaching the Side Bracket .................................................................................... 8
Side Mounting Instructions .................................................................................... 9
Product Dimensions ............................................................................................ 10
Appendix A: Driver Install .................................................................................... 10
2
YUNO-K215-BLACK Power Cord
User Manual
RJ-50 to DB-9M Cable x 2
DC Power Supply
Side Bracket x 4
Bracket Screws Mylar x 8
Package Overview
Thermal Pad
Product Overview
YUNO-K215-BLACK is an 22inch touch display module designed for point of
sale and kiosk applications. The product is a modular design for easy
maintenance.
• Front View
• Back View
3
Model Name YUNO-K215-BLACK
CPU support Intel® Bay Trial-M SoC
Processor J1900
(2M Cache, up to 2.16 GHz)
Intel® Core™ i3-5010U
Processor
(3M Cache, 2.10 GHz)
System Memory 4GB
BIOS Phoenix uEFI BIOS
LCD Panel
LCD Size 21.5" (AUO T215HVN01.1)
Brightness 250 cd/m²
Maximal resolution 1920 x 1080
Aspect Ratio 16:9
Backlight Type LED
LED Life Time 30,000 Hours (min.)
Touch Sensor
P-CAP Touch
Touch Screen 10 points
Controller IC EETI 7900
Interface USB
Storage
1st SSD 64GB
2nd SSD 1 x 2.5" 7mm SATA MLC SSD
Side I/O
Power button 1 x with Power indicator (Blue color when power ON)
USB 1 x USB 2.0 and 1 x USB 3.0 2 x USB 3.0
Rear Bottom I/O
DC-IN jack 1 x Radio jack connector for 19VDC input
Audio jack 1 x 4-conductor 3.5mm audio jack for MIC-in and Line-out
Serial / COM
2 x RJ50 connector with RJ50 to DB9 cable for RS-232 port
COM1/COM2: RS232, wake on ring (S1, S3, S4, S5) support
COM3/COM4: RS232, powered COM with BIOS select none
(Default setting)/ +5V (Default) / +12V for DB9 pin9 by BIOS setting.
LAN 1 x RJ45 port for Gigabit Ethernet, support Wake on LAN
USB 4 x USB 2.0
Cash Drawer 1 x RJ12, Support 12V/24V DC Cash Drawer
Display Port Baytrail has no supported
mini Display Port
1 x mini Display Port
(supporting active converter
cable to VGA, DVI, HDMI)
Specication
4
Power
Power Adapter External 19V / 4.74A 90Watt Adapter
Communication
Wireless LAN 2.4/5 GHz, 802.11ac, a/b/g, n
Wi-Fi Bluetooth Module (YUNO-WBM option)
Certications
EMI FCC Class A / CE / LVD
Environment
Operating
Temperature
0-35°C (32°F-95°F)
Storage
Temperature -20°C-60°C (-4°F-140°F)
Humidity 5%-80% non-condensing
Dimension
(W x D x H) LCD 0 degree : 517.44 x 54.08 x 313.31mm
Weight
(N.W./G.W.) 5.75kg / 7.73kg
OS support Windows® 7 Professional for Embedded Systems,
Windows® Embedded POSReady 7, Windows®
Embedded 8 Industry Retail
* This specication is subject to change without prior notice.
5
Dust & Water
Proof IP 54 (front panel)
How to start the module
1. Remove the cover of module.
2. Connect the DC adapter to the power connector on the module.
3. Press the “Power Switch” button to ON/OFF the module.
4. Add the cover to module.
Power Switch
6
How to Install Yuno board to YUNO-K215-BLACK
How to Install or Remove the Mylar
1. Mylar x 8 units is located in the accessory box.
2. There are 8 places where the mylar can be added (see below).
3. To install the mylar simply place it over one of the holes.
4. To remove the mylar, use a pointy object to dislodge it.
7
Add M/B to module.
3
Turn and tighten the thumb screw.
4
Add the cover to module.
6
Place thermal pad onto the heat sink and
remove the second side of the protection.
2
1
Take the thermal pad from accessory box,
and remove one side of the protection.
Connect 40pin eDP cable to MB 40pin
connector.
5
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Idiomas:
Otros manuales de Panel táctil de AURES
Manuales populares de Panel táctil de otras marcas
IBASE Technology
IBASE Technology ASTUT-152-RE1S Manual de usuario
YASKAWA
YASKAWA TP 610C Manual de usuario
B&R
B&R Power Panel C Series Manual de usuario
Beijer Electronics
Beijer Electronics X2 control Manual de usuario
AXIOMTEK
AXIOMTEK GOT321W-521 Manual de usuario
TRIDONIC.ATCO
TRIDONIC.ATCO x-touchBOX Manual de usuario
