AURES POSEO 5100 Guía del usuario

User Manual

April 2010 Revision 1.1

POSEO 5100

POSEO 5100POSEO 5100

POSEO 5100

Hardware System

Hardware SystemHardware System

Hardware System

Manual Version 1.1

The information contained in this document is subject to change without notice.

We make no warranty of any kind with regard to this material, including, but not limited to, the

implied warranties of merchantability and fitness for a particular purpose. We shall not be

liable for errors contained herein or for incidental or consequential damages in connection

with the furnishing, performance, or use of this material.

This document contains proprietary information that is protected by copyright. All rights are

reserved. No part of this document may be photocopied, reproduced or translated to another

language without the prior written consent of the manufacturer.

TRADEMARK

Intel®, Pentium® and MMX are registered trademarks of Intel® Corporation. Microsoft® and

Windows® are registered trademarks of Microsoft Corporation.

Safety

IMPORTANT SAFETY INSTRUCTIONS

1. To disconnect the machine from the electrial power supply, turn off the power switch

and remove the power cord plug from the wall socket. The wall socket must be easily

accessible and in close proximity to the machine.

2. Read these instructions carefully. Save these instructions for future reference.

3. Follow all warnings and instructions marked on the product.

4. Do not use this product near water.

5. Do not place this product on an unstable cart,stand,or table.The product may fall,

causing serious damage to the product.

6. Slots and openings in the cabinet and the back or bottom are provided for ventilation;to

ensure reliable operation of the product and to protect it from overheating. These

openings must not be blocked or covered.The openings should never be blocked by

placing the product on a bed, sofa, rug, or other similar surface.This product should

never be placed near or over a radiator or heat register,or in a built-in installation

unless proper ventilation is provided.

7. This product should be operated from the type of power indicated on the marking

label.If you are not sure of the type of power available, consult your dealer or local

power company.

8. Do not allow anything to rest on the power cord. Do not locate this product where

persons will walk on the cord.

9. Never push objects of any kind into this product through cabinet slots as they may

touch dangerous voltage points or short out parts that could result in a fire or electric

shock. Never spill liquid of any kind on the product.

CE MARK

This device complies with the requirements of the EEC directive

2004/108/EC with regard to “Electromagnetic compatibility” and 2006/95/EC

“Low Voltage Directive”.

FCC

This device complies with part 15 of the FCC rules. Operation is subject to the following

two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may

cause undesired operation.

CAUTION ON LITHIUM BATTERIES

There is a danger of explosion if the battery is replaced incorrectly. Replace only with the

same or equivalent type recommended by the manufacturer. Discard used batteries

according to the manufacturer’s instructions.

LEGISLATION AND WEEE SYMBOL

2002/96/EC Waste Electrical and Electronic Equipment Directive on the treatment,

collection, recycling and disposal of electric and electronic devices and their

components.

The crossed dustbin symbol on the device means that it should not be disposed of with

other household wastes at the end of its working life. Instead, the device should be taken

to the waste collection centers for activation of the treatment, collection, recycling and

disposal procedure.

To prevent possible harm to the environment or human health from uncontrolled waste

disposal, please separate this from other types of wastes and recycle it responsibly to

promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product, or

their local government office, for details of where and how they can take this item for

environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the

purchase contract.

This product should not be mixed with other commercial wastes for disposal.

Revision History

Revision

Number Description Revision Date

1.0 Initial release May 2008

1.1

Updated specification table

Added Appendix B: Dimensional

drawings

April 2010

Table of Content

1. Packing List.................................................................................................................... 8

2. System View .................................................................................................................. 9

2.1 Front View............................................................................................................. 9

2.2 I/O View .............................................................................................................. 10

3. Driver Installation ......................................................................................................... 11

3.1 Driver List............................................................................................................ 11

3.2 Chipset Driver Installation ................................................................................... 11

3.3 USB 2.0 Driver Installation OS Requirements..................................................... 13

3.4 VGA IEGD Driver Installation .............................................................................. 16

3.5. Audio Driver Installation ..................................................................................... 18

3.6 LAN Driver Installation ........................................................................................ 19

4. Peripherals Installation................................................................................................. 20

4.1. Cash Drawer Installation.................................................................................... 20

4.1.1 Cash Drawer Pin Assignment .......................................................................... 20

4.1.2 Cash Drawer Controller Register ..................................................................... 20

4.1.3 Cash Drawer Control Command Example ....................................................... 21

5. System Disassembly.................................................................................................... 22

5.1. Removing the Front Cover................................................................................. 22

5.2 Removing the Top Cover .................................................................................... 22

5.3 Replacing the HDD ............................................................................................. 23

5.4. Replacing the DVD-ROM (Option)..................................................................... 24

5.5. Replacing the Power Supply.............................................................................. 25

5.6. Replacing the USB Hub & PCI Extension Module (Options).............................. 26

5.7. Replacing the Memory ....................................................................................... 27

5.8. Replacing the Motherboard................................................................................ 27

6. Specification................................................................................................................. 29

7. Motherboard, Jumper Settings, Connectors................................................................. 31

7.1 B89 Motherboard layout...................................................................................... 31

7.2 Jumper Settings.................................................................................................. 32

7.3 Connectors and Pin Assignments ....................................................................... 34

8. BIOS Settings .............................................................................................................. 36

Appendix A: PCI Card Dimensions .................................................................................. 39

Appendix B: Dimensional Drawings ................................................................................. 40

1. Packing List

Take the system unit out of the carton. Remove the unit from the carton by holding it by the

foam inserts. The following contents should be found in the carton:

a. Power Cable b. Driver CD

2. System View

2.1 Front View

Battery

LED

Power ButtonKey Lock Power

LED

1 x USB behind

front bezel

(See Ch. 5.1- 5.2)

2.2 I/O View

Note: The maximum current that can be drawn from each COM port is 500 mA.

Assignment

1 NC

2 + 24V DC

3 GND

DC output 24V Pin Assignment

AC Power COM2 & 4

Line Out

VGA

COM 3 & 5

ash

Drawer

P/S 2

Keyboard

DC Output 24V

COM 6

LPT

COM1 DC Output 12V LAN

4 x

Tabla de contenidos

Manuales populares de Terminal de pago de otras marcas

PAX

PAX D180SRF Manual de usuario

LinkPoint

LinkPoint AIO Manual de usuario

Moneris

Moneris hispeed 6200 Manual de usuario

Moneris

Moneris iWL220 Manual de usuario

Ingenico

Ingenico iUC280 Manual de usuario

Ingenico

Ingenico Tetra Move/5000 Manual de usuario

Ingenico

Ingenico iWL250B Manual de usuario

Optimum

Optimum M4230 Manual de usuario

Triton

Triton RL5000 Manual de usuario

Ingenico group

Ingenico group Lane/8000 Manual de usuario

Gilbarco

Gilbarco FlexPay IV CRIND Manual de instalación y operación

Infinite Peripherals

Infinite Peripherals Infinea Tab Lite Manual de usuario

PAX

PAX S920 Manual de usuario

Ingenico

Ingenico iCT220, iCT250 Manual de usuario

dejavoo

dejavoo Z Series Manual de usuario

VeriFone

VeriFone VX 520 Series Manual de usuario

Optomany

Optomany axept S900 Manual de usuario

Skyzer

Skyzer iWL252 BLUETOOTH Manual de usuario