AURABEAT 3800 Manual de usuario
Aurabeat 3800
Large Capacity Sanitizing Air Purifier
Model ASP-X1
User Manual
Aurabeat North America
Distributed Exclusively by Brondell, Inc.
PO Box 470085
San Francisco, CA 94147-0085
commercialsupport@brondell.com
aurabeat-us.com
P.3P. 2
Never let the power cord encounter sharp points or edges.
Never kink, crush, or modify the power cord.
Turn off and unplug the device to replace filter.
Do not allow objects to enter, cover or block the air inlets and air outlets.
When unplugging the appliance from the power supply, do not pull on the power cord, pull on
the power plug.
Do not alter the power plug in any way.
Do not use the appliance near fire or hot surfaces.
Ensure the appliance is switched off and disconnected from the power supply before performing
any maintenance operation; never use steam cleaning equipment-risk of electric shock.
Repair and maintenance can only be carried out by one of our trained after-sales technicians. If
the appliance is defective, unplug the appliance from the power supply and contact the after-sales
service.
Do not use abrasive or harsh cleaners such as window sprays, scouring cleansers, flammable
fluids cleaning waxes, concentrated detergents, bleaches, or cleansers containing petroleum
products on plastic parts, interior and door liners, or gaskets. Do not use paper towels, scouring
pads or other harsh cleaning tools.
The packaging material is recyclable and is marked with the recycle symbol.
•
•
•
•
•
•
•
•
•
•
•
2. PRODUCT
17
4
8
Touch Display
1
UVC Lamp
5
Air Inlet
4
Power Cord
8
Air Quality Sensor
7
Handle
3Wheels
6
Upper Cover
2
2
3
5
6
CLEANING AND MAINTENANCE
DISPOSAL OF PACKAGING MATERIALS
P.5P.4
3. GETTING STARTED
1 x Air Purifier
1 x Remote Control
2 x 3-Stage HEPA Filters
2 x Metal Pre-Filters
1 x Quick Start Guide
•
•
•
•
•
1.
2.
3.
4.
Find an ideal location to maximize the air cleaning efficiency. The location should be farthest away from the
room's HVAC return vent, windows, and doorways.
Place the purifier on a flat, stable surface. Allow at least 4" of clearance on all sides of the purifier. Keep away
from anything that would block airflow.
Locate the closest electrical outlet.
Before turning on the unit, remove the top cover by sliding the four locking tabs on the top of the unit.
5.
MAKE SURE YOU REMOVE ALL PACKAGING FOR FILTERS AND PRODUCTS BEFORE USING THE
APPLIANCE.
INSTALLATION
WHAT'S INCLUDED
Remove the plastic packaging from the air filters located inside the air purifier unit before turning on or
operating the unit.
After the plastic packaging is removed, insert both sets of filters into the unit. On each side, the Pre-Filter is
inserted in the slot toward the outside of the machine, and the 3-Stage HEPA Filter is placed closest to the
inside of the unit. The white HEPA portion of the 3-Stage HEPA Filter faces outward.
6.
Plug the power cord into an electrical outlet.
Press the power button to turn on the unit. The unit will enter Auto Mode with Plasma and UVC Lamp on.
YOU CAN FOLLOW STEP-BY-STEP INSTRUCTIONS BY SCANNING THE QR CODE BELOW FOR A LINK TO A
DEMONSTRATION VIDEO:
7.
8.
P.7P.6
1. Scan the QR code to download the AURABEAT app from the App Store or Google Play. Once the app has been
successfully installed, you can pair the unit.
2. Press “Don't Allow” if you don't want to share your location or receive notifications.
SETTING UP THE APP
Press “Sign Up” to create an AURABEAT account.
3.
Enter your email address and check the box. Press “Next” to create an account.
4.
5. Enter the verification code that has been sent to your email.
[email protected] Resend(57s)
United States of America
P.9P.8
6. Set a password for your account then press “Next.”
Press “Don't Allow” if you don't want AURABEAT to access your Bluetooth.
7.
1. Press the “+” at the top right corner to add device and press “Air Purifier (Wi-Fi)” under “Add Manually.”
PAIR THE DEVICE
Select a 2.4 GHz Wi-Fi network and enter the password of the Wi-Fi network. Press and hold the unit's Wi-Fi
icon on the Touch Display for 5 seconds or until the icon begins blinking to activate the pairing mode.
2.
P.11P.10
Click “Next” to enter the network configuration page. If the app is not activated successfully within 2
minutes, please deactivate the Wi-Fi function by pressing the “Wi-Fi” icon on the unit and repeat step 2 and
3 again for the app's connection.
3.
After the network is successfully configured, click “Done” to enter the Main Page for the device operation.
4.
The first account paired with the device will be the owner. The owner can add members to the account to
allow other AURABEAT app users to control the device.
To change the owner of the device, follow instructions to reset the device on P. 22.
5.
6.
MAIN PAGE
Los Angeles 71°F Clear
Los Angeles
Los Angeles
Los Angeles 71°F Clear
Outdoor Temperature
and Air Quality
1Child Lock
7Indoor Humidity
12
Location
2Indoor PM2.5 Level
8Plasma
13
Indoor Temperature
3Filter Remaining
Percentage
9Manual Mode
14
Auto Mode
4Last 7 Days Outdoor and
Indoor Air Quality Record
10 Settings
15
Power On/Off
6
Sleep Mode
5Indoor Air Quality
11 UVC Lamp
16
1
2
8
9
10
3
4
5
6
7
12
13
14
15
16
11
P.13P.12
Press “Settings” and then press “Add” to add schedule in “Schedule.”
The schedule can be set for a maximum of 23 hours and 59 minutes and repeat by selected days of the week.
The schedule “ON/OFF” function can only be set when the product is on. Press “ON/OFF” and select “ON” if
you would like to schedule the device to turn on, select “OFF” if you would like to schedule the device to turn
off.
To remove a schedule, swipe left on the desired schedule then press “Delete.”
Press “Settings” and then press “Filter Reset” and “Confirm” to reset the filter.
RESET FILTER
1.
2.
SCHEDULE 3.
1.
P.15
P.14
Press “ ” on the top right hand corner and select “The Shared devices.”
1.
Press “Add Share” to share the device.
2.
SHARE THE DEVICE
Press “My Building” and then select “Building Management” to change the name for your “Building.”
BUILDINGS AND ROOMS
1.
Los Angeles
Los Angeles 71°F Clear
Tap “Co untry/ Region” to ch ange Co un tr y or Region and e nter t he accoun t that y ou wo uld like to sh are th e
device with. Press “Save” to share the device. The shared device will appear in the Home Page of the
account that you have shared.
3.
United States of America
P.17
P.16
To add a room, in “Building Setting” select “Room Management.”
2.
3. Press “ A d d o t h e r r o o m ” i n “ R o o m M a n a g e m e n t ” t o a d d r o o m . E n t e r t h e r o o m n a m e a n d p r e s s “ S a v e . ”
Select added room. Press “+” and “Save” to add the device to the room.
4.
Press “My Building” and then select “Building Management.” Press “+ Add Member” to add member to
control the paired device.
1.
ADD MEMBERS
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Purificador de aire de AURABEAT
AURABEAT
AURABEAT NSP-X1 Manual de usuario
AURABEAT
AURABEAT brondell P700BB Manual de usuario
AURABEAT
AURABEAT NSP-X1 Manual de usuario
AURABEAT
AURABEAT ASP-C2 Manual de usuario
AURABEAT
AURABEAT NSP-X1 Manual de usuario
AURABEAT
AURABEAT AG+ Manual de usuario
AURABEAT
AURABEAT NSP-X1 Manual de usuario
AURABEAT
AURABEAT AB-S1 Manual de usuario
AURABEAT
AURABEAT NSP-W1 Manual de usuario
