Aukey AUKEY-EP-T31 Manual de usuario
User Manual
True Wireless Earbuds
English
Deutsch
Français
Español
Italiano
01~15
16~30
31~45
46~60
61~75
Contents
Thank you for purchasing the AUKEY EP-T31 True Wireless Earbuds. Please read this
user manual carefully and keep it for future reference. If you need any assistance,
please contact our support team with your product model number and Amazon
order number.
True Wireless Earbuds
Charging Case
Three Pairs of Ear-Tips (S/M/L)
USB-A to C Cable
User Manual
Quick Start Guide
Warranty Card
Package Contents
- 01 -
Product Diagram
- 02 -
LEDBattery
LevelIndicator
Charging Pins
USB-CChargingInput
LED Status Indicator
Touch-Sensitive Panel Infrared Proximity Sensor
Microphone
Specifications
Earbuds
Charging Case
Model
Technology
Driver (each channel)
Sensitivity
Frequency Range
Impedance
Microphone Type
Microphone Sensitivity
Microphone Frequency Range
Charging Time
Battery Type
Operating Range
IP Rating
Weight
Charging Input
Charging Time
Battery Type
Number of Earbuds Recharges
Weight
EP-T31
BT 5, HSP, HFP, A2DP, AVRCP, AAC
1 x 7mm / 0.28” speaker driver
97dB ±3dB SPL (at 1kHz/1mW)
20Hz – 20kHz
16 ohm ±15%
MEMS (microphone chip)
-39dB ±4dB (at 1kHz ref 1V/Pa)
100Hz – 10kHz
2 hours
Li-polymer (2 x 43mAh)
10m / 33ft
IPX5
8g / 0.27oz (pair)
DC 5V
2 hours (cable), 3 hours (wireless charger)
Li-polymer (580mAh)
5 times (pair)
38g / 1.35oz
- 03 -
Getting Started
Charging
Fully charge the charging case before first use. To charge, connect the case to a USB
charger or charging port with the included USB-A to C cable (or put the case on a
wireless charger). When all four LED battery level indicator lights are solid white, the
case is fully charged. Charging takes around 2 hours, and after being fully charged,
the case can fully charge the earbuds 5 times. The earbuds should be stored in the
case when not in use.
- 04 -
Turning On / Off
Pairing
Starting with the earbuds in the case:
1.
2.
3.
4.
Take the left and right earbuds out of the case. They will turn on automatically
and connect with each other within 5 seconds
After the earbuds have connected successfully, the LED status indicator on the
master earbud will flash white slowly. This indicates the earbuds are ready to pair
From the list of available devices, find and select “AUKEY EP-T31”
If a code or PIN is required for pairing, enter “0000”
Turn On
Turn Off
Remove both earbuds from the charging case or touch and hold
on the touch-sensitive panels on both earbuds for 2 seconds when
they are turned off
Return both earbuds to the charging case or touch and hold on
the touch-sensitive panels on both earbuds for 5 seconds when
they are turned on
- 05 -
Using the Left/Right Earbud Only
Starting with the earbuds in the case:
1.
2.
3.
Take the left/right earbud out
Turn on the pairing function on the device you want to pair with the earbud
From the list of available devices, find and select “AUKEY EP-T31”
Regular Use After Pairing
Once the earbuds are successfully paired with your device, they can be switched
on and off as follows:
●
●
Take the earbuds out of the charging case and they will turn on and connect
with each other automatically
To power off, put the earbuds back in the charging case and they will begin
charging
- 06 -
Low-Latency Mode
For the best experience when watching videos & movies or playing games, the
video output on your device and the audio output from earbuds should be in sync.
The EP-T31 earbuds feature a Low-Latency Mode to ensure sound output precisely
matches video output. Turn it on or off by triple-tapping the touch-sensitive panel
on the right earbud while the earbuds are connected. When only playing music or
outputting other audio without any video, Low-Latency Mode isn’t needed so it’s
recommended to leave it off for best-possible connection quality.
Clearing the Pairing List
Starting with the earbuds in the case:
1.
2.
Simultaneously touch and hold on the touch-sensitive panels on both earbuds for
10 seconds. The LED status indicators on both earbuds will flash red and white
alternately three times and the pairing list will be cleared
Take the earbuds out of the charging case. They will turn on, connect with each
other, and enter pairing mode
- 07 -
- 08 -
Notes
●
●
●
●
When you turn on the earbuds, they will automatically reconnect to the
last-paired device or enter pairing mode if no paired device is found
In pairing mode, the earbuds will automatically turn off after 5 minutes if no
devices are paired
If one of the earbuds has no sound output, put both earbuds back in the charging
case and take them out again
The wireless operating range is 10m (33ft). If you exceed this range, the earbuds
will disconnect from your paired device. The connection will be re-established if
you re-enter the wireless range within 2 minutes
Otros manuales para AUKEY-EP-T31
1
Tabla de contenidos
Idiomas:
Otros manuales de Auriculares de Aukey
Aukey
Aukey EP-B60 Manual de usuario
Aukey
Aukey EP-T10 Manual de usuario
Aukey
Aukey EP-B33 Manual de usuario
Aukey
Aukey EP-B4 Manual de usuario
Aukey
Aukey Key Series Manual de usuario
Aukey
Aukey EP-T25 Manual de usuario
Aukey
Aukey EP-T25 Manual de usuario
Aukey
Aukey EP-B40 Manual de usuario
Aukey
Aukey EP-B80 Manual de usuario
Aukey
Aukey EP-N6 Manual de usuario
Aukey
Aukey EP-N7 Manual de usuario
Aukey
Aukey Wearbuds AI-W20 Manual de usuario
Aukey
Aukey EP-T21S Manual de usuario
Aukey
Aukey EP-T21 Manual de usuario
Aukey
Aukey EP-T1 Manual de usuario
Aukey
Aukey AUKEY-EP-T31 Manual de usuario
Aukey
Aukey EP-N7 Manual de usuario
Aukey
Aukey EP-B40 Manual de usuario
Aukey
Aukey EP-T32 Manual de usuario
