Audiovox OARC03G Manual de usuario
3-Device
Universal
Remote Control
Control Remoto Universal
de 3 Dispositivos
/!2#' 5SERS 'UIDE s 'UÓA DEL 5SUARIO
Contents
Installing the Batteries............................... 2
Care and Maintenance............................... 2
Setting Up the Remote .............................. 3
Direct code setup .................................... 3
The search method.................................. 4
Code Retrieval ............................................ 5
Quick Code Reference................................ 5
The Keypad................................................. 6
Extra Features............................................. 8
Volume punch through........................... 8
Macros (Sequence of commands).............. 9
Troubleshooting....................................... 10
Additional Information............................ 11
Limited Lifetime Warranty ...................... 22
Contenido
Instalación de las Baterías........................ 12
Cuidado y Mantenimiento....................... 12
Cómo Configurar el Control Remoto...... 13
Configuración a través
de la entrada directa de códigos....... 13
El método de búsqueda........................ 14
Recuperación de Códigos ........................ 15
Referencia Rápida de Códigos................. 15
El Teclado.................................................. 16
Funciones Adicionales.............................. 18
Irrupción de Volumen ........................... 18
Macros (Secuencia de comandos)............ 19
Resolución de Problemas......................... 20
Información Adicional ............................. 21
Garantía Limitada
Durante la Vida Útil del Producto........ 23
2
Care and Maintenance
s +EEPTHEREMOTEDRY)FITGETSWETWIPEITDRY
immediately.
s 5SEANDSTORETHEREMOTEONLYINNORMAL
temperature environments.
s (ANDLETHEREMOTEGENTLYANDCAREFULLY$ONT
drop it.
s +EEPTHEREMOTEAWAYFROMDUSTANDDIRT
s 7IPETHEREMOTEWITHADAMPCLOTHOCCASIONALLY
TOKEEPITLOOKINGNEW
s -ODIFYINGORTAMPERINGWITHTHEREMOTES
internal components can cause malfunction and
INVALIDATEITSWARRANTY
The OARC03G Universal Remote Control by One For All
ISAPERFECTWAYTOSIMPLIFYHOMEENTERTAINMENT)TLETS
you control up to three of your home entertainment
DEVICESFROMASINGLEEASYTOUSEREMOTE
Installing the Batteries
4HISREMOTENEEDSNEW!!ALKALINEBATTERIESNOT
included).
1. Remove the battery cover from the back of the
remote.
-ATCHTHEBATTERIESTOTHEANDMARKSINSIDETHE
BATTERYCASETHENINSERTTHEBATTERIES
3 Press the battery cover back into place.
Battery Precautions:
s $ONOTMIXOLDANDNEWBATTERIES
s $ONOTMIXALKALINESTANDARDCARBONZINCOR
RECHARGEABLENICKELCADMIUMBATTERIES
s !LWAYSREMOVEOLDWEAKORWORNOUTBATTERIES
promptly and recycle or dispose of them in
ACCORDANCEWITH,OCALAND.ATIONAL2EGULATIONS
3
Setting up the remote
4HEREARETWOWAYSTOPROGRAMTHISREMOTETOCONTROL
your devices: by entering the code directly or by
searching through the codes to find the one that
controls your device. Try the Direct code setup first.
Direct code setup
1. Find the code for your device in the Code list. Codes
are listed by device type and brand name. The most
popular code is listed first. Make sure your device is
SWITCHEDONNOTONSTANDBY
2. Press the device key on this remote for the device
YOUWISHTOSETUP
0RESSANDHOLDDOWNTHE3%4KEYUNTILTHE
POWERKEYBLINKSTWICETHEKEYWILLBLINKONCE
THENTWICE
%NTERAlVEDIGITCODEFORYOURDEVICESBRANDUSING
the number keys. The KEYBLINKSTWICE
Note: If the key gives one long blink instead of
two shorter blinks, you’ve entered an invalid code.
Try entering a code again.
.OWAIMTHISREMOTEATYOURDEVICEANDPRESS
POWER)FYOURDEVICESWITCHESOFFTHEREMOTEIS
ready to operate your device.
4URNYOURDEVICEBACKONANDTRYALLTHEREMOTES
FUNCTIONSTOENSURETHEYAREWORKINGPROPERLY)F
THEFUNCTIONSDONOTWORKPROPERLYREPEATSTEPS
1–5 using another code listed for your brand.
)FYOURDEVICEDOESNOTRESPONDFOLLOWSTEPSTO
WITHEACHCODELISTEDFORYOURBRAND)FNONEOF
THECODESLISTEDFORYOURBRANDOPERATEYOURDEVICE
ORIFYOURBRANDISNOTLISTEDATALLTRYTHESEARCH
method described in the next section.
Important notes:
s )FYOURDEVICEDOESNOTRESPONDORISNOTFUNCTIONING
PROPERLYWITHONEOFTHECODESTRYANOTHERCODE
listed under your brand.
s )FYOURDEVICESORIGINALREMOTECONTROLDOESNOT
HAVEA0/7%2KEYPRESS (play) instead of
POWERWHENSETTINGUPYOURDEVICE
s 2EMEMBERTOPRESSTHECORRECTDEVICEKEYBEFORE
operating your device. Only one device can be
assigned to a device key. If your original remote
OPERATESMORETHANONEDEVICEYOUNEEDTOSETUP
each device separately.
4
The search method
If your device does not respond to this remote after
YOUHAVETRIEDALLTHECODESLISTEDFORYOURBRANDTRY
SEARCHINGFORYOURCODE4HE3EARCH-ETHODALLOWSYOU
to find the code for your device by scanning through
ALLTHECODESCONTAINEDINTHEREMOTESMEMORY4HE
3EARCH-ETHODMAYALSOWORKIFYOURBRANDISNOTLISTED
at all.
3WITCHYOURDEVICEONNOTONSTANDBY
2. Press the device key on this remote for the device
YOUWISHTOSETUP
0RESSANDHOLDDOWNTHE3%4KEYUNTILTHE
POWERKEYBLINKSTWICETHEKEYBLINKSONCETHEN
TWICE
4. Press 9 9 1. The KEYBLINKSTWICE
5. Press the number key corresponding to the device
YOUWANTTOPROGRAMFORCABLESATELLITEDIGITAL
46CONVERTERORVIDEOACCESSORIESFORA46FORA
$6$PLAYER6#2OR062
!IMTHISREMOTEATYOURDEVICE.OWPRESS#(
OVERANDOVERUNTILYOURDEVICETURNSOFFEVERY
TIMEYOUPRESSTHE#(KEYTHEREMOTESENDSOUT
APOWERSIGNALFROMTHENEXTCODECONTAINEDIN
the memory). You may have to press this key many
times (up to 150 times) so please be patient. If
YOUSKIPPASTACODEYOUCANGOTOTHEPREVIOUS
CODESBYPRESSINGTHE#(KEY2EMEMBERTOKEEP
POINTINGTHEREMOTEATYOURDEVICEWHILEPRESSING
this key.
!SSOONASYOURDEVICETURNSOFFPRESSTHE3%4KEY
to store the code.
Important note:
s )FYOURDEVICESORIGINALREMOTECONTROLDOESNOT
HAVEA0/7%2KEYPRESS (play) instead of
POWERINSTEP
5
Code Retrieval
4HECODERETRIEVALFEATUREALLOWSYOUTOlNDOUTWHICH
code is currently programmed for each device key. This
is useful if you used the Search Method to program a
device key.
1. Press the device key once.
0RESSANDHOLDDOWNTHE3%4KEYUNTILTHE
POWERKEYBLINKSTWICETHEKEYBLINKSONCETHEN
TWICE
3. Press 9 9 0. The POWERKEYBLINKSTWICE
&ORTHElRSTDIGITOFYOURlVEDIGITCODEPRESSAND
COUNTALLTHEBLINKS)FTHEREARENOBLINKSTHEDIGIT
is “0”.
&ORTHESECONDDIGITPRESSANDCOUNTALLTHE
BLINKS)FTHEREARENOBLINKSTHEDIGITIShv
&ORTHETHIRDDIGITPRESSANDCOUNTALLTHEBLINKS
)FTHEREARENOBLINKSTHEDIGITIShv
&ORTHEFOURTHDIGITPRESSANDCOUNTALLTHEBLINKS
)FTHEREARENOBLINKSTHEDIGITIShv
&ORTHElFTHDIGITPRESSANDCOUNTALLTHEBLINKS)F
THEREARENOBLINKSTHEDIGITIShv.OWYOUHAVE
YOURlVEDIGITCODE
Quick Code Reference
Device Type Code
6
The Keypad
7
(Power) 4HEPOWERKEYOPERATESTHESAME
function it did on your original remote control. The
POWERKEYWILLLIGHTUPEVERYTIMEAKEYISPRESSED
TV, DVD/VCR, CBL/SAT (DTC) The device keys
DETERMINEWHICHDEVICEYOURECONTROLLING&OR
EXAMPLETOPLAYA$6$ONYOUR$6$PLAYERPRESSTHE
DVD/VCR key first. Then press the (play) key to start
playback.
Note: DTC stands for Digital TV Converter.
Number Keys 4HE.UMBERKEYSPROVIDE
functions just like your original remote.
INFO 4HE).&/KEYDISPLAYSANYAVAILABLEINFORMATION
ABOUTTHEPROGRAMORDISCYOUREWATCHINGIFYOUR
device offers this functionality).
EXIT The EXIT key takes you out of the current menu
or guide screen.
Red, Green, Yellow, Blue Use these keys to access
additional features on your satellite receiver or cable
box (consult your satellite or cable program provider for
DETAILS4WOOFTHEKEYSHAVEADDITIONALFUNCTIONSIN
other modes:
)N46MODETHE Blue Key (INPUT) goes through the
INPUTSONYOUR46)N$6$6#2MODEYOUWILLOBTAIN
THEh46$6$vORh466#2vFUNCTIONIFAVAILABLEON
your original remote. In CBL/SAT (DTC) mode you
WILLOBTAINTHEh463!4vORh46$46vFUNCTIONIF
available on your original remote.
)N46MODEORIFCONTROLLINGADIGITAL46CONVERTER
the Red Key (–) lets you separate the main channel
NUMBERFROMASUBCHANNELNUMBER&OREXAMPLETO
ACCESSCHANNELPRESSTHENTHEnKEYTHEN
GUIDE )N46$6$6#2ANDOR#",3!4$4#MODE
YOUWILLOBTAINTHEh'UIDEvFUNCTIONIFAVAILABLEON
your original remote).
SET The SET key is used to set up this remote.
MENU 4HE-%.5KEYCONTROLSTHESAMEFUNCTIONASIT
did on your original remote.
Directional Keys If available on your original
REMOTETHESEKEYSLETYOUNAVIGATETHROUGHTHEMENU
mode of your device.
OK/ENTER 4HE/+%.4%2KEYCONlRMSYOURCHOICEIN
menu operation.
VOL +/- Keys 4HESEKEYSOPERATEINTHESAMEWAYAS
the keys on your original remote.
CH +/- Keys 4HESEKEYSOPERATEINTHESAMEWAYAS
the keys on your original remote.
LAST The LAST key takes you to the previous channel
or screen (if this function is available on your device).
8
MUTE The MUTE key reduces your device to its
minimum volume (if this function is available on your
device).
(transport keys for DVDs,
VCRs, PVRs, DVRs) These keys operate the transport
FUNCTIONSPLAYFASTFORWARDREWINDETCOFYOUR
DEVICE4OPREVENTACCIDENTALRECORDINGTHE (RECORD)
KEYMUSTBEPRESSEDTWICETOSTARTRECORDING
In TV mode the KEYACTIVATES0ICTURE)N0ICTUREIF
AVAILABLEONYOUR46ANDTHE KEYSWAPSBETWEEN
THEMAINPICTUREANDTHE0ICTURE)N0ICTURE
FORMAT 4HISKEYPROVIDESYOUTHEWIDESCREEN
VIEWFUNCTIONIFAVAILABLEONYOURORIGINALREMOTE
Extra Features
Volume Punch Through
You may be able to use some functions of your
4ELEVISION6IDEORECORDER$6$PLAYER3ATELLITERECEIVER
or Cable converter at the same time. For example: if you
AREWATCHINGAPROGRAMONYOURVIDEORECORDERYOU
CANADJUSTTHEVOLUMEA46FUNCTIONWITHOUTPRESSING
the TV mode key on this remote.
To punch through to TV volume while in DVD/VCR
or CBL/SAT (DTC) mode:
0RESSANDHOLDDOWNTHE3%4KEYUNTILTHE
POWERKEYBLINKSTWICETHEKEYBLINKSONCETHEN
TWICE
2. Press 9 9 3.
4HENPRESSTHE46KEYANDTHEREDLIGHTBLINKSTWICE
To cancel “Volume Punch Through” for a single
mode:
0RESSTHEDEVICEKEYFORTHEMODEYOUWANTTO
CANCELVOLUMEPUNCHTHROUGH&OREXAMPLETO
CANCELVOLUMEPUNCHTHROUGHFOR$6$6#2MODE
press the DVD/VCR key.
0RESSANDHOLDDOWNTHE3%4KEYUNTILTHE
POWERKEYBLINKSTWICETHEKEYBLINKSONCETHEN
TWICE
3. Press 9 9 3.
4HENPRESSTHE6/,nKEYANDTHEREDLIGHTWILLBLINK
four times.
4HE6OLUMEKEYSWILLNOWCONTROLTHE6/,nAND
MUTE functions on the original device (not on the TV).
&OREXAMPLEIFYOUCANCELEDVOLUMEPUNCHTHROUGHFOR
$6$6#2MODEYOUWILLBEABLETOCONTROL6/,nOR
MUTE functions of your DVD player or VCR (provided it
has volume control).
9
To cancel “Volume Punch Through” for all modes:
0RESSANDHOLDDOWNTHE3%4KEYUNTILTHE
POWERKEYBLINKSTWICETHEKEYBLINKSONCETHEN
TWICE
2. Press 9 9 3.
0RESSTHE6/,KEYANDTHEREDLIGHTWILLBLINKFOUR
times.
Macros (Sequence of commands)
Macros (Direct)
You can program this remote to issue a sequence of
commands at the press of one button. Any sequence
of commands you regularly use can be reduced to one
KEYSTROKEFORYOURCONVENIENCE&OREXAMPLEYOUMAY
WANTTOMAKEASINGLEKEYTHEMASTERPOWEROFFBUTTON
for all of the devices this remote controls.
To set up a master power off macro on the yellow
key:
0RESSANDHOLDDOWNTHE3%4KEYUNTILTHE
POWERKEYBLINKSTWICETHEKEYBLINKSONCETHEN
TWICE
2. Press 9 9 5.
0RESSTHEKEYTOWHICHTHE-ACROWILLBEASSIGNED
INTHISCASETHEYELLOWKEY
.EXTPRESSTHECOMMANDSYOUWANTTOBEPARTOF
THEMACROINTHISCASE46 #",3!4$4#
$6$6#2 ).
4OSTORETHE-ACROPRESSANDHOLDDOWNTHE3%4
key until the POWERKEYBLINKSTWICETHEKEY
BLINKSONCETHENTWICE
6. Whenever you press the key you assigned to this
MACROINTHISCASETHEYELLOWKEYTHEREMOTEWILL
automatically send the sequence of commands you
ENTEREDINSTEPINTHISCASEITWILLTURNOFFYOUR
466#2AND$6$PLAYER
s 4OERASETHE-ACROFROMTHE9ELLOWKEYPRESS
;3%4=;=;=;=;9ELLOWKEY=;3%4=
(EREYOUMUSTHOLDDOWNTHE3%4KEYUNTILTHE
POWERKEYBLINKSTWICETHEKEYBLINKSONCETHEN
TWICE
Important notes:
s %ACH-!#2/CANCONSISTOFAMAXIMUMOFKEY
PRESSES4HISREMOTECANHOLDUPTOMACROS
depending on the complexity of each. In other
WORDSTHEMORECOMPLEXTHEMACROSTHEFEWER
separate macros the remote can store.
s -AKESURETHATYOUPROGRAMA-ACROONASPAREKEY
THATYOUDONTUSEINANYMODE
s /NCEYOUPROGRAMA-ACROONASPECIlCKEYTHE
SEQUENCEWILLWORKREGARDLESSOFTHEMODE46#",
3!4$4#AND$6$6#2YOUAREUSING
10
s 4OAVOIDACCIDENTALRECORDINGSWITHTHISREMOTEYOU
MUSTPRESSTHE2ECORDKEYTWICETOBEGINRECORDING
"ECAUSEOFTHISYOUCANNOTASSIGNA-ACROTOTHE
Record key.
s )FYOUHAVETOHOLDDOWNAKEYFORAFEWSECONDSON
THEORIGINALREMOTECONTROLTOGETAFUNCTIONTHIS
FUNCTIONMAYNOTWORKINAMACROONTHISREMOTE
s )FYOUPROGRAMA-ACROONAKEYTHEORIGINAL
FUNCTIONWILLBECOMESHIFTEDEXCLUDING#(AND
6/,KEYS0RESSTHE3%4KEYTHENTHEKEYTO
access it.
Troubleshooting
My brand is not listed in the code section.
s 4RYTHEPROCEDUREDESCRIBEDINThe Search Method
section.
The remote does not operate my device(s).
s 4RYALLTHECODESLISTEDFORYOURBRAND
s 4RYTHEPROCEDUREDESCRIBEDINThe Search Method
section.
The remote is not performing commands properly.
s 9OUMAYBEUSINGTHEWRONGCODE4RYREPEATING
the Direct Setup using another code listed under
your brand or start the search method over again to
locate the proper code.
Problems changing channels.
s %NTERTHECHANNELNUMBEREXACTLYASYOUWOULDON
your original remote.
Video not recording.
s !SASAFETYFEATUREONTHISREMOTEYOUMUSTPRESS
the 2ECORDKEYTWICE
The remote does not respond after pressing a key.
s -AKESUREYOUAREUSINGNEWBATTERIESANDARE
aiming the One For All remote at your device.
The key does not blink when I press a key.
s 2EPLACEBATTERIESWITHFRESHNEW!!ALKALINE
batteries.
For additional information:
s )NTERNETHTTPWWWONEFORALLCOM
Tabla de contenidos
Idiomas:
Otros manuales de Mando a distancia de Audiovox
Audiovox
Audiovox Pursuit PRO-9556i Manual de usuario
Audiovox
Audiovox FlexVision DBX-600 Manual de usuario
Audiovox
Audiovox PAB-RC Manual
Audiovox
Audiovox 892338 Manual de usuario
Audiovox
Audiovox RCRN03BR Manual de usuario
Audiovox
Audiovox 993000 Manual de usuario
Audiovox
Audiovox RCR412BR Manual de uso y mantenimiento
Audiovox
Audiovox VSIR100W/B Manual de usuario
Audiovox
Audiovox 42H90002 Manual de usuario
Audiovox
Audiovox PAB-RC Manual de usuario
