Atten GT-8102 Manual de usuario
GT-8102 Hot Air Desoldering Station User Manual
GT
compatible
Contents
Copyright information
Description of common symbols
Essential knowledge for users
Safety precautions ..
Disclaimer
Packing list
Schematic diagram of the whole equipment
Connection steps for the whole equipment
Operations of air volume / temperature setup
Parameter setup
System setup menu ....
Host system setup parameters
Total items of function setup menu
Diagram of keypad functions in curve mode
Curve working interface
Product warranty
After-sales contact
Appendix
Product warranty card
........................................................................2
........................................................2
...........................................................2
..........................................................................2
........................................................................................2
........................................................................................3
.......................................4
.........................................4
Technical parameters .. .....................................................................6
....................................8
Description of normal working interface .............................................7
Selection method of working interface ................................................7
...............................................................................9
Use method of vacuum pen ...............................................................9
Enabling / Disabling of vacuum pen function ......................................9
Call of quick air volume / quick temperature .......................................8
.....................................................................10
........................................................11
..................................................14
....................................17
...................................................................17
Care and maintenance ....................................................................22
............................................................................23
........................................................................23
.........................................................................................24
.....................................................................25
1
Warning
Warning Misuse of this product may lead to serious injury or death to the user.
Caution Misuse of this product may lead to serious injury to the user or material damage to
the object involved.
● To ensure the normal operation of this product’s ESD function, only three-core power cord
shall be used as the host connecting line.
● Do not play or do other similar dangerous actions when using this equipment, because it can
easily lead to injury to others or yourself.
● Do not use this product for purposes other than de-soldering.
● Do not modify this product and its accessories, otherwise the original warranty will be invalidated
or damage may occur to the product.
● When plugging and unplugging the power cord and handle plug, please hold the plug body and
do not pull the cord.
● Do not hit the product or its accessories too hard during the operation; otherwise damage may
occur to the product.
Caution
● Keep this product away from flammable materials.
● Keep the product out of children's reach.
● Do not use this product if you are inexperienced or have no sufficient necessary knowledge
without the guidance of related personnel.
● Do not use this product under wet environment or with wet hands to avoid electric shock.
● Do not modify this product or its accessories without authorization.
● Please turn off the power when replacing parts and iron tips, and do not resume the use until
the equipment is completely cooled down.
● Please use the accessories from the original factory when replacing the product parts.
● Make sure to turn off the power switch when the equipment is temporarily stopped or out of use.
2
Copyright information
Description of common symbols
Essential knowledge for users
Safety precautions
Disclaimer
The design of this product (including internal software) and its accessories is under the protection of
relevant state laws. Any infringement upon the relevant rights of our company will be subject to legal
sanctions. Users shall consciously abide by the relevant state laws when using this product.
Thank you for using our products. Before using the product, please read this manual carefully and pay
attention to the relevant warnings and cautions mentioned in this manual.
Users are required to have basic knowledge of common sense and electrical operations before using
the product.Minors shall use the product under the guidance of a professional or guardian.
[Caution]: To avoid damaging the equipment and keep the safety of the operational environment,
please read this manual carefully before use and keep it well so that you may read it at any time
when necessary.
To avoid electric shock or injury to the human body or fire hazard, the following basic rules must be
observed when using the equipment. In order to ensure personal safety, only parts and accessories
approved or recommended by the original factory can be used, otherwise, serious consequences may
occur!
When using this product, the spray nozzle of hot air gun, with the temperature up to 100-480℃, may
cause burns to the user or cause a fire due to improper application. So Users shall strictly observe
the following rules:
We will take no responsibility for any personal injury or property damage caused by reasons other than
the product quality problem, which may include force majeure (natural disasters, etc.) or personal
behavior during the operation of this product.
This manual is organized, compiled and released by SHENZHEN ATTEN TECHNOLOGY CO., LTD.
according to the latest product features. We will not be responsible for further notice of the subsequent
improvement of the product and this Manual.
Manual
GT-8102 packing list
GT-8102 host
Operating manual
Power line
Handle holder
Spray nozzle
Suction disc
Spring
1 Set
1 Set
1 Pcs
1 Pcs
3 Set
4x3 Pcs
4 Pcs
1 Set
1 Pcs
1 Set
1 Pcs
1 Set
2×2 Pcs
Vacuum pen
Hot air gun handle
Conformity certificate
Double-male-connector
Tool box
Suction nozzle
Power lineDouble-male-connector
Conformity
certificate
Handle holderSpray nozzle
Tool box
GT-8102 host
Hot air handle
Vacuum pen
3
Packing list
GT-8102 hot air desoldering station user manual
GT
compatible
Suction disc Spring Suction nozzle
1
3
4
5 2 8 967 10 111213
Vacuum pen interface
Hot air handle interface
Down arrow key /minus key
Rapid temperature key 1
Confirm key / Menu key
Up arrow key / plus key
1
2
3
4
5
6
Rapid temperature key 2 / Vacuum pen
switch reuse key / System setup menu
switching key
7
Rapid temperature key 3 / System setup
menu switching key
Power plug, connected to rated AC power
Power master switch
RS232 communication interface
Handle holder interface
8
9
10
11
12
Power fuse
Install the hot air handle
13
Connection steps for the whole equipment
2
4
Schematic diagram of the whole equipment
USE ONLY WITH 250 V FUSE
Install the dormancysupport
1
Connect the charger Press power button, and the equipment
can be started or shut down.
Warning
When replacing the hot air handle, be sure to turn off the power switch of host, and unplug the power
plug, to avoid electric shock.
5 6
5
Connect to the signal line of dormancy
switch(With dormancy function, thus
ensuring effective use of products and
energy-saving.)
4
Connect the vacuum pen
3
Technical parameters
Rated operating voltage
Product model
Rated power
Power fuses
Setting range of temperature
Multiple language for
user interface
Setting range of air volume
Timing time
Temperature unit
Monitor contrast
Monitor resolution
Quick function
User temperature
compensation
Heating power display
Hot air flow
Cooling function of
standby heater
Vacuum pressure of
vacuum pen
Alarm function
Heating element
exception detection
Password protection
function
Temperature sensor
exception detection
Temperature adjustment
step
Air volume adjustment
step
Rapid temperature / air
volume
Working conditions
Storage conditions
Dimension
AC 230V±10% 50hz (110v±10% 60hz, optional)
GT-8102
T 6.3A (230VAC) T 12A (110V AC)
1000W（Max）
100℃ ~ 480℃/ 212℉ ~ 896℉
Support Chinese / English interface;
Chinese interface by default
25%~99%
10~900S
℃/℉; ℃ by default
10~100%
Three groups of rapid temperature
±50℃ /±90℉
Five dynamic power bars
Available (Enabled by default)
120L（Max）
Supported
-80Kpa
Heating element removal detection; heating element open
circuit detection; heating element overheating detection
Available (Disabled by default)
Sensor open circuit detection
Long press and the temperature will be adjusted at a step
of 10 units; momentarily press, and the temperature will
be adjusted at one unit.
Long press and the air volume will be adjusted at a step
of two units; momentarily press, and the air volume will
be adjusted at one unit.
3 groups of temperature / air volume,
which can be called quickly
240x160 Dots(white letters on blue)
Temperature 0℃～40℃ Relative humidity＜80%
Temperature -20℃～80℃ Relative humidity＜80%
315（L）×252（W）×127（H）mm
Approximately 4kgWeight
6
Description of GT-8102 normal working interface
Selection method of working interface
GT-8102 startup interface
Versio n:1 .00
ww w.atten.com
8102
1
2
3
4
5
Status display area.
Display of air volume.
Rapid temperature / air volume 1.
Air volume setting icon.
Rapid temperature / air volume 2.
6
7
8
9
Rapid temperature / air volume 3.
Display area of preset temperature.
Display of actual temperature.
Heating power strength display.
7
50 %
50% 50% 50%
c
300
---
o
200 300 400
GT-8102 normal working interface
Standby
1 6 743 5
2 8 9
Aften connected with charger turn on the power switch. the product will be working normally.
Aften the screen display systen version for 3 seconds.
1. Long press “MENU” key to enter the system setup interface;
2. Short press the shortcut key “3” to enter the function setup interface (short press the shortcut
key “2” to jump to the system setup interface);
3. Select the interface mode (normal / curve);
When setting the air volume, press “ ” and
the air volume will increase (increase to 99% at
most).
When setting the temperature, press “ ”
and the temperature will rise (rise to 480℃ at
most).
Operations of air volume / Temperature setup
Call of quick air volume / quick temperature
1
2
2
1
8
33
%
29% 45% 99%
c
200
---
o
380 410 480
Standby
33
%
29% 45% 99%
c
200
---
o
380 410 480
Standby
32
%
29% 45% 99%
c
200
---
o
380 410 480
Standby
200
3
1
33
%
29% 45% 99%
c
200
---
o
380 410 480
Standby
Short press “MENU” key to switch the air
volume setup and temperature setup.
If selecting the icon , it means setting the
air volume.
If selecting the icon ℃, it means setting
the temperature.
When setting the air volume, press “ ” and
the air volume will drop (drop to 25% at most).
When setting the temperature, press “ ”
and the temperature will drop (drop to 100℃ at
most).
Short press “1” (“2” or “3”), and the
corresponding quick temperature value and air
volume value can be called.
Note: The quick air volume value / temperature
value can be changed and set in the function setup
menu.
Default status:
Quick 1 temperature / air volume: 200℃/50%.
Quick 2 temperature / air volume: 300℃/50%.
Quick 3 temperature / air volume: 400℃/50%.
Tabla de contenidos
Otros manuales de Herramientas eléctricas de Atten
