Atmos ACD 03 Manual de usuario
Operation manual - EN
www.atmos.eu EN - 1
ACD03/04
Operation
manual
Operation manual - EN
www.atmos.eu
ACD03/04
Operation manual - EN
www.atmos.eu EN - 3
ACD03/04
CONTENTS
1. SOFTWARE VERSION 9
2. INTRODUCTION 9
3. DESCRIPTION 10
Basic division of ATMOS ACD 03 and ATMOS ACD 04 controllers 10
Variants of ATMOS ACD 03 and ATMOS ACD 04 controllers 11
ATMOS ACD 03 - Controller inserted into boiler panel 11
ATMOS ACD 04 - ATMOS ACD 04 - Controller installed in boiler instrument hood (in factory) 11
4. INSTALLATION IN BOILER 13
ATMOS ACD 03 13
ATMOS ACD 04 14
Recommended sensors installation 15
5. CONNECTION 17
Connection terminals (description) on the back side of the controller 17
Terminal block and connectors 17
Overview of connection terminals of ACD 03/04 controller 18
6. INSTALLATION GUIDE (WIZARD) (first start of the controller) 20
Installation Guide 20
Key to define hydraulic diagram number 25
7. BUTTONS AND INFORMATION ON THE SCREEN 27
ATMOS ACD 03/04 controller display 27
8. OPERATING MODES MENU 46
Basic description of operating modes 48
Standby - permanent working mode 49
Setback -
permanent working mode 50
Comfort -
permanent working mode 51
Summer -
permanent working mode 52
Auto (time program) -
permanent working mode 53
Visit - temporary working mode 54
Absence - temporary working mode 56
Holidays - temporary working mode 57
9. TEMPERATURE SETTING MENU 58
10. SETTING MENU 59
Date, Time 60
Setting the current time 60
Setting the current date 60
Setting automatic switching to summer time 61
Time calibration setting (seconds/week) 61
The function allows you to set the time measurement deviation setting (number
of seconds per week). 61
Time source 62
Time programs for Auto mode 63
Weekly program selection (week A / week A, B, C) 64
Time programs setting 65
Weekly time program overview 66
Daily time program overview 66
Operation manual - EN
www.atmos.eu
EN - 4
ACD03/04
Copying the day 68
Copying weekly heating circuit program 69
Limitations (link to other parameters): 70
Resetting time programs to their default state 71
Hydraulics 72
Menu - Hydraulic diagram overview: 72
Menu - Communication: 76
Menu - Function configuration: 85
Terminal assignment 86
Terminal change 88
Release the clamp 89
Boiler type designation 90
Controlled boiler 90
Boiler submenu- definition of additional functions for the boiler: 91
Accumulation tank submenu- overview of defined elements: 96
Domestic water DHW (2) submenu - overview of defined elements: 99
Heating circuit 1 function submenu: 105
Heating circuit 2 function submenu: 112
Heating circuit 3 function submenu: 119
Heating circuit 4 function submenu: 126
Sources submenu: 127
Solar heating submenu: 131
General setting submenu - definition of additional functions: 133
Temperature sensors submenu - definition of additional sensors 135
Menu - Output test: 137
Menu - Actuator direction of rotation: 138
Hydraulic diagram 139
Key to define hydraulic diagram number 140
Overview of connection terminals of ACD 03/04 controller 142
Examples of hydraulic diagrams: 144
Not controlled boiler connected without accumulation tank 144
Hydraulic diagram: 11033 Example 1 145
Not controlled boiler connected with accumulation tanks 146
Hydraulic diagram: 17033 Example 2 147
Controlled boiler connected without accumulation tank 148
Hydraulic diagram: 33033 Example 3 149
Controlled boiler connected without accumulation tank 150
Hydraulic diagram: 33833 Example 4 151
Controlled boiler connected with accumulation tanks 152
Hydraulic diagram: 37833 Example 5 153
Controlled boiler (GSE) connected with accumulation tank 154
Hydraulic diagram: 57033 Example 6 155
Controlled boiler (GSE) connected with accumulation tank 156
Hydraulic diagram: 57833 Example 7 157
Controlled boiler (GSE) connected with accumulation tanks (into series) 158
Hydraulic diagram: 55833 Example 8 159
Controlled boiler with burner connected without accumulation (buffer) tank 160
Hydraulic diagram: 23333 Example 9 161
Operation manual - EN
www.atmos.eu EN - 5
ACD03/04
Controlled boiler with burner connected with accumulation (buffer) tank 162
Hydraulic diagram: 27833 Example 10 163
Controlled boiler with burner connected without accumulation (buffer) tank 164
Hydraulic diagram: 23033 Example11 165
Controlled boiler with burner connected with accumulation (buffer) tank 166
Hydraulic diagram: 27833 Example 12 167
Controlled combined boiler (with modification for burner) connected without accumulation tank
168
Hydraulic diagram: 63033 Example 13 169
Controlled combined boiler (with modification for burner) connected with accumulation tank
170
Hydraulic diagram: 67833 Example 14 171
Controlled combined boiler (SP) connected without accumulation tank 172
Hydraulic diagram: 63003 Example 15 173
Not controlled combined boiler (SP) connected with accumulation (buffer) tank 174
Hydraulic diagram: 16003 Example 16 175
Controlled combined boiler (SP) connected with accumulation tanks (parallel) 176
Hydraulic diagram: 67003 Example 17 177
Controlled combined boiler (GSP) connected with accumulation tanks (into series) 178
Hydraulic diagram: 77833 Example 18 179
Controlled boiler connected with accumulation tank and solar system 180
Hydraulic diagram: 37533 Example 19 181
Controlled boiler with burner connected with accumulation (buffer) tank and solar system
182
Hydraulic diagram: 27533 Example 20 183
Controlled boiler with burner connected with accumulation (buffer) tank and solar system
184
Hydraulic diagram: 27533 Example 21 185
Controlled boiler connected with accumulation tank
and external boiler without built-in pump 186
Hydraulic diagram: 37233 Example 22 187
Controlled boiler connected with accumulation tank and heat pump 188
Hydraulic diagram: 37003 Example 23 189
Parameters:
System 190
Boiler 200
Automatic wood ignition 210
Accumulation tank 216
Sources 221
Heating circuit 1 / 2 / 3 / (4) 225
DHW 236
General function 242
Solar heating 243
Sensors calibration 250
Sweeper 251
Alarms 253
Alarm overview 254
Password 246
Operation manual - EN
www.atmos.eu
EN - 6
ACD03/04
11. INFORMATION MENU 257
12. OVERVIEW OF MENUS AND THEIR PARAMETERS 259
SYSTEM menu 259
BOILER menu 260
ACCUMULATION TANK menu 261
HEATING CIRCUIT 1 / 2 / 3 / (4) menu 262
DHW menu 261
SOURCES menu 263
GENERAL FUNCTION menu 263
SOLAR HEATING menu 263
13. ROOM UNITS 266
ARU5 Room unit (sensor) 266
ARU10 Room unit with temperature correction 268
ARU30 Room unit with touch screen 276
14. TECHNICAL PARAMETERS 289
GARANTIEBEDINGUNGEN 292
Operation manual - EN
www.atmos.eu EN - 7
ACD03/04
1. SOFTWARE VERSIONU
2. INTRODUCTION
3. DESCRIPTION
4. INSTALLATION IN BOILER
5. CONNECTION
6. INSTALLATION GUIDE (WIZARD)
8. OPERATING MODES MENU
7. BUTTONS AND INFORMATION ON THE SCREEN
9. TEMPERATURE SETTING MENU
10. SETTING MENU
Hydraulic diagrams
System
Boiler
Automatic wood ignition
Accumulation tank
DHW
Sources
Alarms
Heating circuit 1 / 2 / 3 / (4)
Password
Solar heating
Sweeper
Sensors calibration
General function
11. INFORMATION MENU
12. OVERVIEW OF MENUS AND THEIR PARAMETERS
13. ROOM UNITS
14. TECHNICAL PARAMETERS
Operation manual - EN
www.atmos.eu
EN - 8
ACD03/04
Operation manual - EN
www.atmos.eu EN - 9
ACD03/04
1. SOFTWARE VERSION
This operation manual can be used from the Program version (VERSION PRG)… AC16D 1.05
The program version is displayed at the end of the Information under the button i-
System information.
2. INTRODUCTION
Equithermal controllers ATMOS ACD 03 and ATMOS ACD 04 with touch screen are designed
for comfortable control of the hot-water system of the heated building. The control of the controller
is very simple and intuitive thanks to the touch screen.
The controller contains functions for direct control of the boiler, boiler circuit, three heating cir-
cuits, domestic hot water (DHW), solar, etc...
For correct operation, the controller must be precisely set up via the installation guide (according
to the selected hydraulic diagram).
2. Introduction 1. Software version
Operation manual - EN
www.atmos.eu
EN - 10
ACD03/04
3. DESCRIPTION
Basic division of ATMOS ACD 03 and ATMOS ACD 04 controllers
4 - Slot for SD card
5- ACD 03 regulator attaching mechanism into panel opening
6- ACD 03/04-B relay module (power part)
7- FAN connector for fan speed sensing (special function)
8- 1, 2, 3 connectors for connection of control outputs (0 - 10 V, GND, PWM - pump control signal)
9- Sensor connectors
10 - Power parts connectors (pumps, actuators, etc.)
1 - Screw for the attachment of the ACD 03 controller to the boiler panel
2- Touch screen
3- Openings for attachment of the ACD 04 regulator in the boiler instrument hood
4
1
105
2
6 67
3
98
2
ATMOS ACD 03 ATMOS ACD 04
3. Description
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
