Atmel REB231ED Manual de usuario

Atmel AVR2040: REB231ED Evaluation Kit

Quick Start Guide

Features

This application note briefly describes how to set up and run the pre-flashed

performance test application included with the Atmel®REB231ED evaluation kit.

The Atmel Controller Base Board (CBB) is intended to serve as the microcontroller

platform for the Atmel Radio Extender Board (REB) family. A REB connected to a

CBB forms a battery powered, fully functional and portable wireless node. The

REB231ED evaluation kit was created for evaluating the Atmel AT86RF231 radio

transceiver.

1 Kit contents

2 x Atmel Controller Base Board (CBB)

2 x REB231ED Radio Extender Board (REB)

2 x RS232 level shifter cable

4 x AAA battery

1 x Quick start guide

From left to right: 2 x CBB, 2 x REB, 2 x RS232 cable.

2 Board assembling

1. Check/set power switch off on the two CBBs.

2. Insert two batteries in each CBB.

3. Connect each REB to a CCB to create two REB-CBB assemblies.

8-bit Atmel

Microcontrollers

Application Note

Rev. 8381B-AVR-09/11

Expand1

Connector

2 Atmel AVR2040

8381B-AVR-09/11

OFF

Power switch

Plug each REB vertically into the 2x20 female Expand1 connector header on the

CBB:

•Ensure that the pin 1 marking on the REB header aligns with the corresponding

pin 1 marking on the CCB Expand1 connector header

•The top side of the REB, which has the radio transceiver and antenna, should be

facing towards the batteries on the CBB

3 Simple range measurement

The pre-flashed performance test suite on the REB231ED evaluation kit assemblies

features a simple range measurement application. Each assembly operates in a

standalone manner, and is able to transmit or receive data frames. A successful

transmit or receive operation is indicated by a blinking LED.

3.1 Power up the assemblies

Apply power to both REB-CBB assemblies

by switching on the power switch located on

the top side of the CBB. The assemblies run

a power-on check, and indicate the

successful completion by switching on the

second of the three LEDs, LED-D2.

3.2 Run simple range measurement application

Choose one of the REB-CBB assemblies, and press button T1

to start the simple range measurement application.

First, the REB-CBB initiates a connection and configuration

procedure by sending broadcast frames and waiting for a

response from the second REB-CBB. After a successful

configuration, the REB-CBBs turn on LED-D1 to indicate that

status. Afterwards the initiator starts to transmit data frames immediately. Each data

frame transmission is indicated by blinking the TX status LED-D2. A successful data

frame reception on the second node is indicated by blinking the RX status LED-D3.

The RX status LED stops blinking if no data frames are received, such as when, for

example, the node has left the communication range. Data frame transmission can be

stopped by pressing T1 once more on the node transmitting frames.

Moreover the REB-CBBs can transmit and receive frames simultaneously. Pressing

button T1 on both nodes initiates each node to transmit frames. The three LEDs

indicate their respective functions: LED-D1 a successful configuration, LED-D2

transmission and LED-D3 reception.

NOTE The node configuration gets lost when resetting or switching off the REB-CBB power

supply. To restart the simple range measurement, a reset or power cycle has to be

applied to both REB-CBB assemblies before pressing T1 on one (or both) REB-

CBB(s) to restart the application.

4 Packet error rate measurement

The pre-flashed performance test suite is also configured with packet error rate (PER)

measurement functionality (as defined in IEEE®802.15.4), enabling the user to

explore various radio transceiver features, radio transceiver registers, and

performance by tuning with customized configurations. For this application, one REB-

CBB needs to be connected to a PC.



D3 D2 D1 T1

RX TX configuration

status

Atmel AVR2040

8381B-AVR-09/11

OFF

Power switch

4.1 Board assembling

1. Assemble the boards as described in Chapter 2,

Board assembling.

2. Make sure that the power switch on both assemblies

is in the off position.

3. Plug the yellow D-Sub-9 connector of one RS232

cable into the PC serial COM port. Connect the 6-pin

plug of the RS232 cable onto one of both REB-CBB

assemblies so that the red stripe of the ribbon cable

connects to pin 1 of the CBB header, USARTD0.

4.2 Set up the terminal program on the PC

A terminal program running on the PC is used to control the application running on

the two REB-CBB assemblies. Set up the terminal program as follows:

COM port: COM1 (check for correct assignment)

Baud rate: 9600

Parity: None

Data bits: 8

Stop bits: 1

Flow control: Off

4.3 Power up the assemblies

Apply power to both (optional: one) REB-

CBB assemblies by switching on the power

switch located on the top side of the CBB.

The assemblies run a power-on check, and

indicate the successful completion by

switching on the second of the three LEDs.

4.4 Run the packet error rate measurement

Type any character in the terminal window to

initiate the configuration procedure for both

REB-CBB assembly nodes and show the

menu. Optionally, if no peer node is active, the

search for a peer device can be aborted by

pressing ENTER. The node gets configured for

stand-alone operation. The packet error rate

measurement can be operated through the

menu options displayed on the UART terminal

program. Type the character “S” to run the

application.

A detailed description of the menu options can be found in the Atmel REB231ED

Evaluation Kit User Guide.

5 Applications and documentation

Additional hardware and software documentation related to the REB231ED

evaluation kit can be found on the kit website:

http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4834

8381B-AVR-09/11

Atmel Corporation

2325 Orchard Parkway

San Jose, CA 95131

USA

Tel: (+1)(408) 441-0311

Fax: (+1)(408) 487-2600

www.atmel.com

Atmel Asia Limited

Unit 01-5 & 16, 19F

BEA Tower, Milennium City 5

418 Kwun Tong Road

Kwun Tong, Kowloon

HONG KONG

Tel: (+852) 2245-6100

Fax: (+852) 2722-1369

Atmel Munich GmbH

Business Campus

Parkring 4

D-85748 Garching b. Munich

GERMANY

Tel: (+49) 89-31970-0

Fax: (+49) 89-3194621

Atmel Japan

9F, Tonetsu Shinkawa Bldg.

1-24-8 Shinkawa

Chou-ku, Tokyo 104-0033

JAPAN

Tel: (+81) 3523-3551

Fax: (+81) 3523-7581

Atmel®, Atmel logo and combinations thereof, AVR®, AVR®logo and others are registered trademarks or trademarks of Atmel

Corporation or its subsidiaries. Other terms and product names may be trademarks of others.

Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to

any intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN THE ATMEL

TERMS AND CONDITIONS OF SALES LOCATED ON THE ATMEL WEBSITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS

ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE

LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION,

DAMAGES FOR LOSS AND PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OR INABILITY TO

USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no representations or

warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and

product descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically

provided otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel products are not intended, authorized, or

warranted for use as components in applications intended to support or sustain life.

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Atmel:

ATREB231ED-EK

Tabla de contenidos

Otros manuales de Placa madre de Atmel

Atmel

Atmel AT91SAM7S-EK Manual de usuario

Atmel

Atmel ATA8510-EK1 Instrucciones de instalación y funcionamiento

Atmel

Atmel STK526 Manual de instalación

Atmel

Atmel AT91SAM7X-EK Manual de usuario

Atmel

Atmel ICE50 Manual de usuario

Atmel

Atmel AT73C240-EK1 Manual de usuario

Atmel

Atmel Xplained Pro SAM4L Manual de usuario

Atmel

Atmel AT73C239-EK1 Manual de usuario

Atmel

Atmel SAM V71 Xplained Ultra Manual de usuario

Atmel

Atmel ATSAMR30-XPRO Manual de usuario

Atmel

Atmel ATAVRAUTO102 Manual de usuario

Atmel

Atmel SAM4L8 Xplained Pro Manual de usuario

Atmel

Atmel SAMA5D3 EK Series Manual de usuario

Atmel

Atmel AT91EB42 Manual de usuario

Atmel

Atmel SAM9753PIA-DK Manual de usuario

Atmel

Atmel AT91SAM9RL-EK Manual de usuario

Atmel

Atmel SAM D11 Xplained Pro Manual de usuario

Atmel

Atmel SAM L21 Xplained Pro Manual de usuario

Atmel

Atmel AVR ATasicICE POD Manual de usuario

Atmel

Atmel ATA6663-EK Instrucciones de instalación y funcionamiento

Atmel

Atmel ATA6661-EK Instrucciones de instalación y funcionamiento

Atmel

Atmel SAM4S-EK Manual de usuario

Atmel

Atmel ATBTLC1000 BluSDK Manual de usuario

Atmel

Atmel AVR32 EVK1100 Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario