Atmel AT88CK109STK8 Manual de usuario

8739A–SMEM–3/11

Atmel CryptoAuthentication Starter Kit

Atmel AT88CK109STK8

Getting Started Guide

Features

Installing Atmel CryptoAuthentication Evaluation

Studio (ACES)

Powering the board

Reading the device configuration information

Atmel ATSHA204 device

Contents

Atmel AT88CK109BK8 daughter board

Atmel AT88Microbase –AVR base module

6” USB cable

Atmel ATSHA204 samples

Introduction

Atmel®AT88CK109STK8 is an Atmel CryptoAuthenticationstarter kit, which can be used as a reference design

for an USB application requiring the Atmel CryptoAuthentication product family.

Figure 1. Atmel AT88CK109STK8 starter kit

2Atmel AT88CK109STK8 Getting Started Guide

8739A–SMEM–3/11

1. Install ACES (Atmel CryptoAuthentication Evaluation Studio)

Visit www.atmel.com/cryptokits to download and install the latest ACES

2. Configuring the Atmel AT88CK109BK8 and Atmel AT88Microbase

boards

Ensure the Atmel ATSHA204 device in place in the socket with the correct Pin1 orientation

The K1 switch on the Atmel AT88CK109BK8 board should always be in the “uBase” position when

mounted to the Atmel AT88Microbase

The 8ld SOIC package supports both SWI (Single Wire Interface) and I2C communication protocol.

The following steps configure the kit for I2C communication, since the samples in this kit are shipped

with I2C enabled.

Figure 2-1. Atmel AT88CK109BK8 CryptoAuthentication daughter board

The K1 switch on the Atmel AT88CK109BK8 board should always be in the “uBase” position when

mounted to the Atmel AT88Microbase

Table 2-1. Atmel AT88Microbase with an Atmel AT90USB1287 AVR

Pin 1 Indicator

Atmel AT88CK109STK8 Getting Started Guide 3

8739A–SMEM–3/11

Table 2-2. Configuration table

Configuration table

Communication protocol

Atmel AT88CK101BK8

(K1 switch setting)

Atmel AT88Microbase

(K1 switch setting)

Comments

I2C

uBase

TWI (I2C)

Kit shipped with this setup

SWI

uBase

SPI

3. Powering up the board

The Atmel AT88CK109STK8 is a USB powered device.

Simply insert the board into an open USB port

Figure 3-1. Atmel AT88CK109STK8 USB powered

Power LEDs

AT88Microbase CLIENT HOST

4Atmel AT88CK109STK8 Getting Started Guide

8739A–SMEM–3/11

4. Reading the device configuration zone

Insert the Atmel AT88CK109STK8 into a USB port

Launch ACES CE for the desktop shortcut icon or from

Start / All Programs / Atmel Crypto Solutions / ACES / ACES CE

Figure 4-1. ACES

Figure 4-2 will appear indicating the board (CK109), device (SHA204), firmware version (0.0.6), and

the communication interface (TWI)

Figure 4-2. Kit detection screen

Selecting the Show Quick Start Guide check box will launch the QSG alongside the configuration

environment.

Click the “Select Kit” button to launch ACES Configuration Environment –ATSHA204 pane

Atmel AT88CK109STK8 Getting Started Guide 5

8739A–SMEM–3/11

Figure 4-3. ACES configuration environment –Atmel ATSHA204

All three System Status fields should be green and populated, which indicates the proper

communication with the development kit and the Atmel ATSHA204 device

Kit Name: CK101 0.0.5 SWI8

Device: ATSHA204

DevRev: 00 00 00 03

5. Executing the Validate MAC command

Go to Tools \ Validate MAC to launch the Validate MAC window, see Figure 5-1

6Atmel AT88CK109STK8 Getting Started Guide

8739A–SMEM–3/11

Figure 5-1. Validate MAC tools menu

Figure 5-2 will appear

Click the Execute Nonce button

Click the MAC button

Click the CheckMac button

The CheckMac Result: should indicate Matched

Figure 5-2. Validate MAC pane

Atmel AT88CK109STK8 Getting Started Guide 7

8739A–SMEM–3/11

Congratulations, your Atmel AT88CK109STK8 is up and running.

See ACES online Help additional information.

For additional samples, go to: http://www.atmel.com/forms/Samples.asp?family_id=699

6. Additional kits information

Atmel CryptoAuthentication kits

Atmel kits

Atmel device

supported

Device

footprint

Communication

protocol

Socket(s)

AT88CK454BLACK

ATSHA204

SOT23-3

SWI

None/USB Dongle

AT88CK101STK3

ATSHA204

SOT23-3

SWI

AT88CK101STK8

ATSHA204

8LD SOIC

SWI/I2C

AT88CK109STK3

ATSHA204

SOT23-3

SWI

AT88CK109STK8

ATSHA204

8LD SOIC

SWI/I2C

7. Firmware Upgrade

See application note, doc8746, “Upgrading Crypto Kits Firmware.”

8. References and further information

A complete reference design including schematics, Gerber files, bill of materials (BOM), hardware user

guide and development and demonstration software is conveniently downloadable from the Atmel website

at www.atmel.com/cryptokits.

8Atmel AT88CK109STK8 Getting Started Guide

8739A–SMEM–3/11

9. EVALUATION BOARD/KIT IMPORTANT NOTICE

This evaluation board/kit is intended for ENGINEERING, DEVELOPMENT, DEMONSTRATION or

EVALUATION PURPOSE ONLY. It is not a finished product and may not (yet) comply with some or

any technical or legal requirements that are applicable to finished products, including, without limitations,

directives regarding electromagnetic compatibility, recycling (WEEE), FCC, CE or UL (except as may be

otherwise noted on the board/kit). Atmel®supplied this board/kit “AS IS,” without any warranties, with

all faults, at the buyer’s and further users’ sole risk. The user assumes all responsibly and liability for

proper and safe handling of goods. Further, the user indemnifies Atmel from claims arising from the

handling or use of goods. Due to open construction of the product, it is the user’s responsibility to take

any and all appropriate precautions with regard to electrostatic discharge and any other technical or legal

concerns.

EXCEPT TO THE EXTENT OF INDEMNITY SET FORTH ABOVE, NEITHER USER NOR ATMEL SHALL BE

LIABLE TO EACH OTHER FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES.

No license is granted under any patent right or other intellectual property right of Atmel covering or

relating to any machine, process, or combination in which such Atmel product or services might be or are

used.

Mailing Address: Atmel Corporation

2325 Orchard Parkway

San Jose, CA 95131

Atmel Corporation

2325 Orchard Parkway

San Jose, CA 95131

USA

Tel:

(+1)(408) 441-0311

Fax:

(+1)(408) 487-2600

www.atmel.com

Atmel Asia Limited

Unit 01-5 & 16, 19F

BEA Tower, Millennium City 5

418 Kwun Tong Road

Kwun Tong, Kowloon

HONG KONG

Tel:

(+852) 2245-6100

Fax:

(+852) 2722-1369

Atmel Munich GmbH

Business Campus

Parkring 4

D-85748 Garching b. Munich

GERMANY

Tel:

(+49) 89-31970-0

Fax:

(+49) 89-3194621

Atmel Japan

9F, Tonetsu Shinkawa Bldg.

1-24-8 Shinkawa

Chuo-ku, Tokyo 104-0033

JAPAN

Tel:

(+81)(3) 3523-3551

Fax:

(+81)(3) 3523-7581

8739A–SMEM–3/11

Atmel®, logo and combinations thereof, CryptoAuthentication™ and others are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. Other

terms and product names may be trademarks of others.

Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this doc ument or in

connection with the sale of Atmel products. EXCEPT AS SET FORTH IN THE ATMEL TERMS AND CONDITIONS OF SALES LOCATED ON T HE ATMEL WEBSITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS

ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF ME RCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR

NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS AND

PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel

makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and rese rves the right to make changes to specifications and products descriptions at any time without

notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided otherwise , Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel

products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life .

Este manual sirve para los siguientes modelos

Otros manuales de Placa madre de Atmel

Atmel

Atmel AVR910 Instrucciones de instalación y funcionamiento

Atmel

Atmel ATA2270-EK1 Manual de usuario

Atmel

Atmel PROTO1 Xplained Pro Manual de usuario

Atmel

Atmel AT91SAM7S-EK Manual de usuario

Atmel

Atmel ATSAM4C-EK Manual de usuario

Atmel

Atmel ATBTLC1000 Xplained Pro Manual de usuario

Atmel

Atmel AT91EB40A Manual de usuario

Atmel

Atmel AT89STK-06 CAN Instrucciones de montaje

Atmel

Atmel Evaluation Board AT91SAM9XE-EK Manual de usuario

Atmel

Atmel AT91SAM9260-EK Manual de usuario

Atmel

Atmel SAMA5D3 Xplained Manual de lista de piezas

Atmel

Atmel AT90S8414 Manual de usuario

Atmel

Atmel SAM3N-EK Manual de usuario

Atmel

Atmel SAM4L8 Xplained Pro Manual de usuario

Atmel

Atmel STK521 Manual de usuario

Atmel

Atmel STK525 Manual de instalación

Atmel

Atmel SAM R21 Xplained Pro Manual de usuario

Atmel

Atmel AT91SAM9263-EK Manual de usuario

Atmel

Atmel AT89EVK-01 Manual de usuario

Atmel

Atmel ATAVRAUTO102 Manual de usuario

Atmel

Atmel OLED1 Xplained Pro Manual de usuario

Atmel

Atmel SAM L22 Xplained Pro Manual de usuario

Atmel

Atmel Xplained Pro SAM4L Manual de usuario

Atmel

Atmel AT91EB55 Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario