Atlantis Air Press Series Guía
User Manual &
Warranty Card
CAUTION:
Before using the Hot Beverage Dispenser, read this manual and follow all safety rules and
operating instructions.
HOT BEVERAGE
DISPENSER
Premix Based:
Recipe Based:
Micro - 2 Lane
Café Mini - 2 Lane
Café Plus - 3/4 Lane
Air Press Series - 2/4 Lane
Select (Multi Option)
Disclaimers:
Accessories shown are not part of the standard product package.
Actual design, colour and specification may vary from the sketches shown.
The picture is used for representation purpose only.
Note: The Machine specifications are subject to change without notice.
Current Publicaon in March 2021
First Published in March 2016
2
Manufactured By
THE VENDING COMPANY
Plot No - 28, Sector- 4, IIE, Sidcul, Pantnagar,
Rudrapur - 263153, Uttarakhand (INDIA)
Call : 70600 02944
Marketed By
VENDING UPDATES INDIA PVT. LTD.
B-23, Sector - 88, Phase II, Noida - 201305,
District Gautam Budh Nagar, Uar Pradesh (INDIA)
Plot No. - 35, Sector -155, Noida - 201310,
District Gautam Budh Nagar, Uar Pradesh (INDIA)
Customer Care
Email: service@atlansplus.com
Call : 85888 25888
Contents
3
Leer from the company
Product features
Introducon - Models
General specificaons
Installaon of machine
Connecng the electricity supply
Programming of 2 Lane Atlans
Programming of 3/4 Lane Atlans
Programming of Select Atlans
Programming in Atlans Micro
Operaon guideline
Beverage dispensing
Daily cleaning operaon
Daily canister filling/jar changing operaon
Descaling
Service guidelines
Exploded views with part’s name
Part replacement process of all crical components
Disposal of the machine
Dos & Don’ts
Warranty Card
04
05
05
06
07
08
08
10
10
12
13
13
14
16
17
19
21
25
33
33
34
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
S. No. Page No.
Leer from the company:
Please be sure to follow the instrucons in the
operaonal guideline to make the necessary sengs.
USER’S MANUAL
Please read the User
manual prior to using
the machine.
4
Congratulaons on the purchase of your Atlans hot beverage dispenser.
You will be impressed by its design, durability,
ease of use and the quality of the beverage
dispensed.
The is a fully automac Atlans hot beverage dispenser
dispensing machine. Each beverage is freshly prepared
at the press of a buon which guarantees high quality
of drink. User control of the machine is possible via a
touch-pad switch.
Keep these instrucons near the hot beverage machine
so that you and your operang staff have the required
informaon handy and can take the correct acon in
the event of any technical problems. In the event of any
service maer see
service manual.
Ensure staff access to
user manual !
Compact Design
Product Feature:
Designed to suit Indian climatic condions
Funcon Indicang LCD display
Thermal protecon for over heat
Suitable for Single Phase Operaon
Climate
Heat Fair Fall Snowfall
LCD
5
HOT BEVERAGE DISPENSER
MODELS DESCRIPTION
2 Lane Hot Premix Based Beverage Dispenser
3/4 Lane Hot Premix Based Beverage Dispenser
Select (7 Opons) Recipe Based Mul Opon Hot Beverage Dispenser
Introducon Models:
2/4 Lane Air Press Series Hot Premix/Recipe Based Beverage Dispenser
Micro Hot Premix Based Beverage Dispenser
USER’S MANUAL
6
General Specications:
Power Supply
Machine Dimension
(W*D*H) (mm)
Net Weight (kg)
Serving Options
Continuous Dispensing Of
100ml Servings
Dispensing Rate (cups/min)
Product Serving Temperature
Water Supply -input Options
Cleaning Cycle
Power Consumption
Current
Operating Method
Boiler Capacity
Heater Element (capacity Kw)
Quantity Of Canisters
Capacity of Canisters
Parameters
Image
Features
Specications
Category
110V/230V-60Hz/50Hz-1ph
320 X 365 X 640
14
2 Options+ Hot water
21 cups
3 cups/min
72~84 deg C
Bubble top/Pump/Online
Automatic
2000 W
9.8 A
Key pad
3 Ltr.
2000 W
2
1.1 kg
110V/230V-60Hz/50Hz-1ph
285 X 350 X 465
5.5
2 Options+ Hot water
8 cups
1 cup/min
72~84 deg C
5 ltr. manual lling
Manual
500 W
2.3 A
Key pad
1 Ltr.
500 W
2
1.1 kg
110V/230V-60Hz/50Hz-1ph
320x477x640
18.4
4 Options + Hot Water
21 cups
3 cups/min
72~84 deg C
Bubble Top/ Pump/Online
Automatic
2000 W
9.8 A
3 Ltr.
2000 W
4
1.1 kg
110V/230V-60Hz/50Hz-1ph
320 X 477 X 640
19.3
7 Options
21 cups
3 cups/min
72~84 deg C
Bubble Top/ Pump/Online
Automatic
2000 W
9.8 A
Key pad
3 Ltr.
2000 W
4
1.1 kg
110V/230V-60Hz/50Hz-1ph
320 X 477 X 640
16.8/18.4
3/4 Options + Hot Water
21 cups
3 cups/min
72~84 deg C
Bubble Top/Pump/Online
Automatic
2000 W
9.8 A
Key pad
3 Ltr.
2000 W
3/4
1.1 kg
2 Lane Select
4 Lane
Air Press
3/4 Lane 2 Lane
Air Press
Micro
110V/230V-60Hz/50Hz-1ph
320 X 365 x 640
14
2 Options+ Hot water
7 cups
1 cup/min
72~84 deg C
Bubble top/Pump/Online
Automatic
700 W
3.2 A
Sensor based contact less dispenser
2 Ltr.
700 W
2
1.1 kg
1. Installaon Guidelines:
1.1 Locang the Machine:
1.2.1 Open the front door using the key provided. Remove all transit packing
and the installaon kit from the machine. Check for visual signs of damage which
may have occurred during transit. If the machine is damaged or any parts are
missing, you must contact authorised seller immediately.
1.1.1 The machine is suitable for indoor use only,
sited in an area with a recommended ambient
temperature not below 10° C and not exceeding
35° C. (image a)
(Image a)
1.1.2 Prior to moving the machine to its locaon, ensure
that there is sufficient access to ensure adequate
venlaon. 100 - 150 mm (4-6 inches) clearance must be
allowed between the back of the cabinet and the wall.
(Image b)
(Image b)
1.1.3 Ensure that the machine is situated on
a strong horizontal surface (See Specificaons table),
at a convenient height and in a posion where it is not
likely to be unstable. (Image c)
(Image c)
1.2 Installaon of Machine
1.2.2 The machine should be situated within one metre of
a drinking water supply from a rising main in case of pump.
Water Supply
by Jar
Water Supply
by RO
Plug
7
HOT BEVERAGE DISPENSER
1.2.3 Firstly break the seal of the potable drinking water
jar/source. Overturn the water bole on top of the
machine carefully to avoid air lock/vacuum venng,
1. 2.4 Remove the plug while changing the jar.
1.4 User Programming Mode:
1.4.1 Programming of Atlans 2 Lane
USER’S MANUAL
1.3.1 The machine must be connected to a 230 Volt 50Hz 6/16
amps switch socket outlet.
Aenon!
Risk to user!
1.3. Connecng the Electricity Supply:
The Atlans 2 Lane is a fully programmable machine which can be customized to the
customer's requirements. Please follow the simple instrucons below to program
your machine:
Press the STOP switch for 3 seconds and the machine enters the programming mode.
Now we would be using the COFFEE, TEA and HALF buons to program the machine.
Image (A)
8
A - Disconnected Condion B - Connected with 6/16 A
Important: If the power cord becomes damaged in any way it
must be replaced by a special lead available from the
manufacturer.
Immediately as we enter the programming mode, the display would show PREMIX
1 3.75. This indicates the dispensing me in seconds for the premix from the
canister 1. There would also be a cursor under the number before the decimal.
The COFFEE and TEA buons can be used to increase or decrease this number. Once
done, press the HALF buon and the cursor would then move to the digit aer the
decimal point. The HALF buon would hence forth play the role of an ENTER buon.
Press HALF (enter) again and the display would show WATER 1 6.0.
Follow the procedure to change the quanty of water in the drink 1 side as above.
9
HOT BEVERAGE DISPENSER
Press HALF again and the machine display shows “returns to the regular MAKE
YOUR CHOICE mode”.
Lastly pressing HALF would show CHANGE PASSWORD. Press TEA or COFFEE and
the YES opon appears. Press HALF again and ENTER the old password followed
by the new password twice.
Press HALF again and we have the USER MESSAGE change opon. Using the
COFFEE, TEA and HALF buons (for saving) you can actually change the name on
the display to your choice. A unique feature only on ATLANTIS machines.
Press HALF and the screen would show CNTR RESET. Pressing COFFEE
TEA would show YES then you have to enter the password and the counters of B1
and B2 would be reset to 0.
Next mode on pressing HALF is the SET DEFAULT opon. If you enable the same by
impung YES, then all sengs of water, powder, temp etc would be restored to the
factory sengs (password and user message remain same).
The default password is currently entered by pressing half 5 mes no number needs
to be entered.
Press HALF again and the display shows TEMP 82. Again this can be adjusted
(to a maximum of 90 degree) by using the coffee and tea (up and down) switches.
Press Half again and we now enter the SET FLUSH mode. Here we have the
following opons (all available using the COFFEE/TEA switches). If we want to flush
the machine at regular intervals, especially when not in use, then we should
enable – YES this opon.
Press HALF again and the display would show ENABLE COIN. (Only applicable to token
operated machine.) Using the COFFEE and TEA we can enable – YES or disable the
token mechanism – NO.
Press HALF buon again and the display show HOT WATER 6.0. This is the quanty
of water which is dispensed when we push the HOT WATER buon. The quanty
can be adjusted by using the COFFEE and TEA buons and saved by pressing the
HALF buon as above.
Press HALF again for WATER 2 (water from the drink 2 side). Make changes as above.
Note that the seng for WATER would always be 1.0 sec more than the respecve
premix. This would ensure that the water would always flow more than powder and
not allow accumulaon if powder in the mixing bowl.
Press HALF and the display would show PREMIX 2 3.75. This refers to the quanty
of premix from canister 2 dispensed. Changes can be made as above.
USER’S MANUAL
1.4.2 Programming of Atlans 3/4 Lane:
The 3 and 4 lane machines are programmed in a very similar manner to the Atlans 2 Lane.
The main differences have been highlighted.
1.4.3 Programming of Atlans Select:
Black
Coffee Café
Lae
Cappuccino Hot
Chocolate Hot
Milk
Tea
Premix
STOP
Mochaccino
Image (B)
Image (C )
10
Press stop switch for 3 sec and machine will enter the programming mode.
Now screen will show “SET DRINKS? : NO” , Press Key 1 (Black Coffee) key for YES; Then it
will show message Select Drink on the screen.
Now select required Bev; Bev1, Bev2, Bev3, Bev4, Bev5, Bev6, Bev7 which seng we want
to change by pressing their respecve key.
Note: Programming of the AIRPRESS series dispensers is same as the
regular café series dispensers, and can be done by holding your hand
in front of the sensors, just like you would press the buons on a
regular machine.
The five buons are named BEV 1, BEV 2, BEV 3, BEV 4, STOP. BEV 1 and BEV 2 buons
does the same funcon as the COFFEE/TEA buon to increase/decrease me and toggle to
enable or disable funcons. BEV 3 is the equivalent of the HALF buon in the 2 lane Café
mini and is primarily for saving and moving on to next mode. In the Café Plus, to get hot
water or half cup, just press the STOP buon once and then the BEV buon of your choice
to get hot water/half cup of drink from that lane. A longer press of the STOP buon and you
can enter the MENU mode and follow the same instrucons as the Café Mini programming.
For example by selecng Bev 1 it will show COFE WTR:06.00 which is the me for which
water from lane 1 is dispensed. This can be increased by pressing key 1 (Black Coffee) and
decreased by pressing key 2 (Coffee Lae) and saved by key 3 (Cappuccino). Post saving the
display will show COFE PDR: 02.00 we can increase and decrease the coffee powder
quanty as given above key 1 for increase and key 2 for decrease and save by key 3.
Post saving display will show COFE DLY: 02.00 here DLY stand for the providing a me delay
to powder from starng of the water.
This powder delay can be increased and decreased as above.
Este manual sirve para los siguientes modelos
8
Tabla de contenidos
Otros manuales de Máquina expendedora de Atlantis
Manuales populares de Máquina expendedora de otras marcas
Godrej
Godrej Minifresh 2000 Manual de usuario
LAUREL
LAUREL 300 Instrucciones de instalación y funcionamiento
Macas
Macas MACES7C-300-90-00 Series Manual de usuario
Dixie Narco
Dixie Narco SIID Manual de operación
VendNet
VendNet CB500-SA Manual de usuario
FAS International
FAS International FASTER TMT Manual de usuario
