4. To lock ratchet, ALWAYS leave the handle in the closed position.
RELEASING THE LOAD-1-in. x 15-ft. Ratchet Tie Down Straps
Working limited: 250Lbs
Max load capacity: 800Lbs
1. Hold the ratchet in one hand and with the other hand pull back on Release Latch (C) that is located on
Handle (A).
2. While holding Release Latch (C) back, open Handle (A) fully past the locking gears until Latch (C) locks in a
completely open position or until the load releases.
CAUTION:The load will release at this point.
3. To loosen or remove strap, pull up on ratchet and slide strap out of Spindle (B).
FORTIEDOWNSTRAP
1.DONOTusetiedownstrapfortowingvehiclesortoholdorsuspendhumanweight.
2.DONOTuseextensionbarlever,pliersoranytoolstooperateasahandle.Usehandpoweronly.
3.Protectstrapwebbingfromsharpedges,heatandacid.Replacestrapwebbingifitiscut,wornordamaged.Inspect
strapwebbing,hooksandhardwarebeforeeachuse.
MAINTENANCE
IMPORTANT:BeforeperforminganymaintenanceofthebottlejackALWAYSdetachfromtheframeand
placeonalevelsurface.AIRPURGINGINSTRUCTIONSWiththeramfullyretracted,locateandremovethe
oilfillerplug.InsertthefootpedalintothesleeveofHydraulicRam,andthenpump6to8strokes.Thiswill
helpreleaseanypressurizedairwhichmaybetrappedinthereservoir.Besurethattheoillevelisjust
belowtheoilfillerplughole.Reinstalltheoilfillerplug.Sometimesduringshipmentandhandling,airmay
becometrappedinthehydraulicsystemcausingpoorornolifting.
OILLEVEL:
IMPORTANT:Whenaddingorreplacingoil,alwaysuseagoodgradeofhydraulicjackoil,transmissionoilor
turbineoilandalwaysavoidmixingdifferenttypesofoil.Neverusebrakefluid,alcohol,glycerine,
detergentmotoroilordirtyoilofanykind.Improperoilusagewillcauseseriousinternaldamagetojack.
ADDINGOIL:Withramfullyloweredandjackonlevelground,removeoilfillplug.Addoiliflevelismore
than1/4"belowholereplacecoverplate.
REPLACINGOIL:Forbestperformanceandlongestlife,oilshouldbereplacedatleastonceeveryyear.To
drainoil,removecoverplate,oilfillerplugandreleasevalve.BeVERYCAREFULtonotallowdirtorany
foreignmatterintothesystem.
LUBRICATION:Putgreaseinfittingonbaseandlubricateliftingarmspindlewithoil,every3months.
