ATD Tools ATD-30312 Manual de usuario
ATD-30312
12” Rechargeable Drum Fan
Owner’s Manual
Features:
• Fan operates with plug-in AC or DC adaptor (included),
or cordless using built-in rechargeable lithium-ion battery
• Variable speed dial control allows for different speeds
• Powder coated adjustable tilt angle fan drum and base
• LED battery capacity indicator
• Includes built in USB power port for charging your cell
phone, laptop, or other mobile devices
• Carrying handle for easy transportation
Specifications:
• 12V DC/18W
• 12V, 2,600mAh lithium-ion rechargeable battery
• High 775 CFM, Low 180 CFM
• Run Time: 36 hours on low / 5.5 hours on high
• Charging Time: 3 hours fully charged
• cETL listed
• Dimensions: 16.1” L x 7.3” W x 14.1” H
2
2
Safety Instructions
As with all electrical appliances, basic safety precautions should always be followed to reduce the risk of electric shock, fire or injury.
Read and save these instructions before using this fan.
• Use this fan only as described in this manual. Any other use not recommended by the manufacturer may cause electric shock, fire or
injury.
• Read all the instructions before using this fan.
• Use this fan only as described in this manual.
• Do not operate this fan with a damaged charging cord, of after the fan has been dropped.
• Do not leave fan unattended.
• This fan is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of
experience and knowledge, unless they have been given supervision or instruction concerning the use of the fan by a person
responsible for their safety.
• Do not place the fan on a small, unlevel, uneven surface or on any surface which might allowa the fan to tip or fall.
• For proper operation, fan should be placed on a smooth, non-combustible, level surface.
• Always unplug fan when not in use.
• Do not operate fan with the blade guards removed.
• Do not run the charging cord under carpeting or cover with throw rugs, runners or the like. Arrange cord away from traffic are where it will
not be tripped over.
• Avoid the use of extension cords due to the risk of fire. If an extension cord MUST be used, the cord must be a minumum of 14 AWG and
rated not less than 1875 watts.
• Do not insert or allow any object to enter any openings on the fan. Doing so may cause electric shock and/or fire hazard.
• Avoid contact with moving parts.
WARNING: Shock Hazard
Control Switch
Round Port
Use your fan only in dry envir
onments. This fan is not intended for use in a bathroom, laundry area, near sings, washing machines,
swimming pools or other sources of water. Never locate fan where it will fall into a bathtub or other water recepticle. Do not use in
damp environments such as flooded basements.
WARNING: Fire Hazard
Use your fan only in dry envir
onments. This fan is not intended for use in a bathroom, laundry area, near sings, washing machines,
swimming pools or other sources of water. Never locate fan where it will fall into a bathtub or other water receptacle. Do not use in
damp environments such as flooded basements. Fans have arcing or sparking parts inside. Do not use near combustable materials
or flammable gases or sources of heat. Do not use in areas where gasoline, paint or flammable materials are stored. Do not block
air intakes or exhaust in any manner. Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may
cause electric shock, fire, or damage the fan.
Operating Instructions
Charging your fan:
To charge the fan, use the provided 24V DC output adapter. Connect the adapter to the charging port on the battery box, and plug into
any 110V AC power source. LEDs will indicate the battery’s power level. NOTE: When the battery power is too low (less than 5% of its
capacity), the 10% LED will flash.
• During the charging stage, all four LEDs will flash progresivley.
• When the battery reaches 10% of its power capacity, the 10% LED will illuminate.
• When the battery reaches 30% of its power capacity, the 30% LED will illuminate.
• When the battery reaches 50% of its power capacity, the 50% LED will illuminate.
• When the battery reaches 100% of its power capacity, the 100% LED will illuminate.
Fan Operation:
To start the fan, rotate the switch knob on the battery box to desired speed.
Tilt Angle Adjustment:
To adjust the tilt angle of your fan, loosen the adjustment knobs on either side of the fan, adjust the angle to the desired setting and
tighten the adjustment knobs.
ITEM# ORDERING PART# PART DESCRIPTION QTY ITEM# ORDERING PART# PART DESCRIPTION QTY
1 PRT30312-01 LOGO PLATE 1 13 PRT30312-10-21*BATTERY BOX 1
2 PRT30312-02 FRONT GUARD 1 14 PRT30312-14 REAR GUARD 1
3 PRT30312-03 BLADES 1 15 PRT30312-10-21*BATTERY BOX 1
4 PRT30312-04 SCREW KNOBS 2 16 PRT30312-16 SHAFT BOLT 1
5 PRT30312-05 SPACER 2 17 PRT30312-10-21*BATTERY BOX 1
6 PRT30312-06 CARRIAGE BOLTS 2
18
PRT30312-18 MOTOR 1
7 PRT30312-07 HANDLE 1
19
PRT30312-10-21*BATTERY BOX 1
8 PRT30312-08 HANDLE SCREW 2 20 PRT30312-10-21*BATTERY BOX 1
9PRT30312-09FAN SHROUD 1 21 PRT30312-10-21*BATTERY BOX 1
10 PRT30312-10-21*BATTERY BOX1 22 PRT30312-22 FAN BASE 1
11 PRT30312-11 SWITCH KNOB 1 23 PRT30312-23 RUBBER PADS 4
12 PRT30312-12 SWITCH 1 24 PRT30312-24 AC ADAPTER (110VAC - 24VDC) 1
*BATTERY BOX INCLUDES 10, 13, 15, 17, 19, 20 & 21
3
3
12 3
4
5
6
78
9
10 11
12
13
14
15 16
17
18
19
20
21
22
23
24
REPLACEMENT PARTS
Not all components of this product are replacement items, but are illustrated as a convenient reference for position in
the assembly sequence. When ordering parts, give model number, part number and description. Call your distributor
for current pricing:
Mobile Phone Charging:
To charge your phone or any USB device from this fan, use the Type-A 5V output port located on the side of the battery box. Use your own
USB charging cord.
Care and Maintenance:
Cleaning: CAUTION - Before cleaning the fan, be sure to disconnect the power cord. Unscrew and remove front grill only. Do not use
harsh chemicals or abrasive cleaners. Do not immerse the fan or cords in water. Allow fan to dry completely before use. Replace the
front grill before use.
NOTE: Rotate the front grill counter-clockwise to take it off for cleaning. Rotate is clockwise to replace it. Do not operate the fan without
the grills in place.
Periodic grill cleaning with a vacuum will prevent dust buildup . The motor is sealed and does not require any maintenance, cleaning or
additional lubrication.
Repair: Do not use the fan if it has malfunctioned or become damaged in any way. Use only factory authorized parts to repair the fan.
Storage: Keep the original carton for storage of the fan. Coil and tie the USB cord to avoid damage during storage.
Learn more about HVAC and refrigeration on our website.
Otros manuales de Admirador de ATD Tools
ATD Tools
ATD Tools ATD-30335A Manual de usuario
ATD Tools
ATD Tools ATD-30335 Manual de usuario
ATD Tools
ATD Tools ATD-30333 Manual de usuario
ATD Tools
ATD Tools 30330A Manual de usuario
ATD Tools
ATD Tools ATD-30330A Manual de usuario
ATD Tools
ATD Tools ATD-30330 Manual de usuario
ATD Tools
ATD Tools ATD-30324 Manual de usuario
ATD Tools
ATD Tools ATD-30331A Manual de usuario
ATD Tools
ATD Tools ATD-30335A Manual de usuario
ATD Tools
ATD Tools ATD-30336A Manual de usuario
ATD Tools
ATD Tools ATD-30321 Manual de usuario
ATD Tools
ATD Tools ATD-30320 Manual de usuario
ATD Tools
ATD Tools 30338 Manual de usuario
ATD Tools
ATD Tools ATD-30330 Manual de usuario
ATD Tools
ATD Tools ATD-30332 Manual de usuario
ATD Tools
ATD Tools ATD-30334A Manual de usuario
ATD Tools
ATD Tools ATD-30334A Manual de usuario
ATD Tools
ATD Tools ATD-30320A Manual de usuario
ATD Tools
ATD Tools ATD-30318 Manual de usuario
ATD Tools
ATD Tools ATD-30335 Manual de usuario
