1a. Detach Wall A place it face down on your
work surface. Then fold the tabs along the
crease lines (x2) over on themselves and
glue.
Apply rm pressure until the glue is semi
cured to stop the tabs from lifting.
1b. Detach Wall B place it face down on your
work surface. Then fold the tabs along the
crease lines (x2) over on themselves and
glue.
Apply rm pressure until the glue is semi
cured to stop the tabs from lifting.
2a. Detach Wall I and glue to Wall A, taking care
to align the windows.
2b. Detach Wall J and glue to Wall B, taking care
to align the windows.
3a. Detach Wall C and place it face down on your
work surface. Then detach Wall G and glue to
Wall C.
The window openings on Wall C will be
slightly bigger than the window openings on
Wall G.
Ensure there is an even gap between the
edges of Wall G and the crease lines on Wall
C.
Wall G has been designed to be shorter than
Wall C.
3b. Detach Wall D and place it face down on your
work surface. Then detach Wall H and glue to
Wall D.
The window openings on Wall D will be
slightly bigger than the window openings on
Wall H.
Ensure there is an even gap between the
edges of Wall H and the crease lines on Wall
D.
Wall H has been designed to be shorter than
Wall D
ii
ii
