AT&T E2116 Manual de usuario

CHAN

MUTE

REDIAL

Quick Start Guide

2.4 GHz Cordless

Telephone E2116

with Caller ID & Call Waiting

Place cordless

handset in base to

charge for at least

16 hours before

first use.

CHAN

MUTE

REDIAL

Plug the power

adapter into an

electrical outlet not

controlled by a wall

switch.

Plug the telephone

line cord into tele-

phone jack.

Installation and setup

After battery installation, place the cordless handset in the base and allow to charge for

at least 16 hours before use. You can keep the battery charged by returning the cordless

handset to the base after each use. When the battery is fully depleted, a recharge takes

about 16 hours. The talk time on a fully charged battery is about four hours depending on

environmental conditions, and the standby time is approximately five days. Actual battery

life will depend on usage conditions, and age of battery.

Plug the battery pack

connector securely

into the plug inside

the cordless handset

battery compartment,

matching the color-

coded label. Then

place battery pack

into compartment.

Low battery indicator.

Return cordless handset to

base to recharge when this

symbol flashes. (When in

use the cordless handset

will beep when battery

is low).

Caution: Use only the supplied

rechargeable battery or AT&T replace-

ment battery model 3301 (SKU 91076,

Part number 80-5071-00-00).

Press down on tab

to open the battery

door.

Slide the battery

door up to close.

BATTERY LOW

0 8/12 10:06 AM

Quick reference guide

CHAN

MUTE

REDIAL

MUTE

During a call, press to mute microphone.

PHONE/FLASH

Press to make or answer a call.

During a call, press to receive an incoming

call, if Call Waiting is activated.

MENU/SELECT

Press to display menu, or to store a pro-

gramming option.

OFF

During a call, press to hang up.

During programming, press to exit

without making changes.

SPEAKER

Press to activate cordless

handset speakerphone.

Press again to resume

normal cordless handset use.

CHAN/DEL

During a call, press to switch to another

channel if the call is noisy or unclear.

Press to delete displayed Caller ID entry.

While phone is not in use, press and hold to

delete all Caller ID entries.

REDIAL/PAUSE

Press to display last number called.

While dialing or entering numbers into

your directory, press to insert a 4-second

dialing pause.

Time

02 MISSED CALLS

8/12 10:06 AM

Cordless Handset

CID V

While in menus, press to scoll down.

When phone is not in use, press to display

call log entries.

While entering names or numbers, press to

delete last character entered.

^DIR

While in menus, press to scoll up.

When phone is not in use, press to display

directory entries.

While entering names, press to advance the

cursor to the next space.

Date

NOTE: For more information, please refer to the user’s manual.

Quick reference guide

Telephone Base

HANDSET LOCATOR

Press to page the cordless handset.

Press again, press OFF on cordless handset, or place

cordless handset in the base to cancel the page (see

the user’s manual page 13 for details).

CHARGE/IN USE

On steady when cordless handset is positioned

so its battery can charge.

Flashes during incoming ringing.

Flashes when the cordless handset is in use.

NEW VOICE MAIL

If you subscribe to a telephone company Voice Mail service,

MESSAGE WAITING appears in the display and the NEW VOICE

MAIL light ﬂashes when you have unretrieved messages waiting.

NOTE: For more information, please refer to the user’s manual.

Choose a locaton for your telephone

Choose a central location close to a telephone jack and a power outlet not connected

to a wall switch. The telephone base can be placed on a ﬂat surface or mounted on a

standard wall plate. For optimum range and better reception, place the telephone base

in a high and open location.

Avoid heat sources, such

as radiators, air ducts, and

sunlight

Avoid placing the telephone base too close to:

• Communication devices such as: personal computers, computer routers, television

sets,VCRs, wireless routers (wireless broadband, wi-fi, or 802.11), other cordless

telephones, etc.

• Excessive heat sources such as radiators, ventilation ducts, and direct sunlight.

• Noise sources such as a window with traffic outside, motors, microwave ovens,

refrigerators, and fluorescent lighting.

• Excessive dust sources such as: a workshop, garage, etc.

• Excessive moisture such as the bathroom, kitchen, sauna, or greenhouse.

• Extremely low temperatures such as the garage.

• Mechanical vibration or shock such as on top of the washing machine or on a work

bench.

Avoid television sets and

other electronic equipment

Avoid noise source such

as a window with heavy

traffic outside

Avoid microwave ovens

Avoid other cordless

telephones

Avoid personal computers

Avoid excessive moisture,

extremely low temperatures,

dust, mechanical vibration,

or shock

Choose a central location

AT&T and the Globe Design are trademarks of AT&T Corp.,

licensed to Advanced American Telephones. Printed in China. Issue 3 AT&T 05/06.

96-006091-030-000.

Otros manuales para E2116

Tabla de contenidos

Otros manuales de Teléfono inalámbrico de AT&T

Manuales populares de Teléfono inalámbrico de otras marcas

3Com

3Com NBX Manual de usuario

Panasonic

Panasonic KX-TGK210HK Manual de usuario

Panasonic

Panasonic KX-TCA181EX Manual de usuario

BT FREESTYLE 3200 Manual de usuario

BREZZICNI

BREZZICNI CL-3622 Manual de usuario

Panasonic

Panasonic KX-TG1831NZ Manual de usuario

Panasonic

Panasonic KX-TG7301E Manual de usuario

Furuno

Furuno FM-4721 Manual de usuario

Sanyo

Sanyo CLT-J70 Manual de usuario

Amplicomms

Amplicomms BigTel 201 Manual de usuario

GE 26992 Manual de usuario

Sanyo

Sanyo CLT-670 Manual de usuario

GE 15432970 Manual de usuario

Curtis

Curtis TC595 Manual de usuario

Gigaset

Gigaset Gigaset 3000 Micro Manual de usuario

Poly

Poly VVX D230 Guía de configuración

Panasonic

Panasonic KX-TGP700 Manual de usuario

GE 27930 Manual de usuario