Asus PCI-V264VT Manual de usuario
R
PCI-V264VT
Graphics Card
USER’S MANUAL
E126
2
R
PCI-V264VT User’s Manual
User’s Notice
No part of this manual, including the products and softwares described in it, may be
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any
language in any form or by any means, except documentation kept by the purchaser for
backup purposes, without the express written permission of ASUSTeK COMPUTER
INC. (“ASUS”).
ASUS PROVIDES THIS MANUAL“AS IS” WITHOUTWARRANTYOFANY KIND,
EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IM-
PLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS,
OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPE-
CIAL,INCIDENTAL,ORCONSEQUENTIALDAMAGES(INCLUDINGDAMAGES
FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTER-
RUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED
OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR
ERROR IN THIS MANUAL OR PRODUCT.
Products and corporate names appearing in this manual may or may not be registered
trademarks or copyrights of their respective companies, and are used only for identifica-
tion or explanation and to the owners’ benefit, without intent to infringe.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE
FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO
CHANGEATANYTIMEWITHOUTNOTICE,ANDSHOULDNOTBECONSTRUED
AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBLITY OR LI-
ABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS
MANUAL, INCLUDING THE PRODUCTS AND SOFTWARES DESCRIBED IN IT.
Copyright © 1997 ASUSTeK COMPUTER INC. All Rights Reserved.
3
R
PCI-V264VT User’s Manual
ASUS PCI-V264VT VGA Card Layout
Adding Additional Memory
The ASUS PCI-V264VT graphics card comes with 1MB video memory configuration.
Memory sockets are available to upgrade the video memory to 2MB by adding 2 memory
chips. Specifications may change without notice.
Small indentation on
the chip's sloped edge
Socket's cut corner
Memory Specifications
Onboard: two 256K x 16 EDO DRAM chips
Upgrade: two 256K x 16 EDO DRAM chips
Installed Example
NOTE: For greaterreliability,makesurethatall video memory are of the sametypeandspeed.
Monitor
Output
AMC Connector
1MB Standard
Upgradeable to 2MB
4
R
PCI-V264VT User’s Manual
Video Driver Installation for Windows 95
Introduction
After installing the ASUS graphics card, software drivers and utilities must be installed.
The following are various driver installation procedures for Windows 95 under specific
situations. The procedures for using the Autorun screen is self-explanatory.
Windows Plug and Play in Windows 95: (Auto installing drivers)
IMPORTANT: If anASUS graphics card (orATI compatible) was installed at one time,
Windows 95 Plug and Play may install ATI’s original driver upon entering Windows 95.
The old driver may cause your system to hang. If this happens, follow these steps to reset
your display driver to its basic defaults:
1. Enter Windows 95 in safe mode by pressing F5 repeatedly during bootup
2. Right click the mouse on the open desktop (not over any icons)
3. Select Properties
4. Click the Settings tab - Settings menu appears
5. Click Change Display Type - Change Display Type windows appears.
6. Click Change button - Select Device windows appears.
7. Click Show all devices - Manufacturers and Models appears
8. Click (Standard display types) - Standard Display Adapter (VGA) is selected
9. Click OK button - Change Display Type windows appears.
10. Click Apply button - System Settings Change window appears
11. Click Yes button to restart your computer now - restart in normal mode.
5
R
PCI-V264VT User’s Manual
Video Driver Installation for Windows 95
Installing ATI Video drivers in Windows 95: (New Hardware Found)
If installing anASUS graphics card for the first time, a “New Hardware Found” window
will appear upon entering Windows 95:
Select which driver you want to install for your new hardware:
Windows default driver
Driver from disk provided by hardware manufacturer
Do not install a driver (Windows will not prompt you again)
Select from a list of alternate drivers
1. ClickOKto use the default selection: “Driver from disk provided by hardware manu-
facturer”
2. Insert ASUS installation CD and click Browse button - Open windows appears.
3. Select your CD-ROM drive in the “Drives:” box
4. Select \win95 directory - macxw4.inf shows in ”File name:”
5. Click the OK button - Install from Disk appears - Click OK button again.
6. Select your device and language then click OK button - Copying Files... appears
7. Click Yes button - ATI Desktop Help will appear upon restart, make changes as
necessary.
6
R
PCI-V264VT User’s Manual
Video Driver Installation for Windows 95
Installing ATI Video drivers in Windows 95 (Prompted by Windows 95)
If an ASUS graphics card (or ATI compatible) was installed unsuccessfully or modified
at one time a “Display” message will appear upon entering Windows 95:
There is a problem with your display settings. The adapter type is incorrect,
or the current settings do not work with your hardware.
1. Click OK button to continue - The “Settings” tab of the Display Properties appears.
2. Click Change Display Type - Change Display Type windows appears.
3. Click Change button - Select Device windows appears.
4. Click Have Disk button - “Install From Disk” window appears
5. Insert ASUS instillation CD and Click Browse button - Open window appears
6. Select your CD-ROM drive in the “Drives:” box
7. Select \win95 directory - macxw4.inf shows in ”File name:”
8. Click the OK button - Install from Disk appears - Click OK button again.
9. Select your device and language then click OK button - Copying Files... appears
10. Change your monitor type if necessary - Click Close button when finished.
11. Adjust the “Desktop area,” “Color palette,” and “Font size” if necessary - Click
Apply button when finished - System Settings Change windows appears:
You must restart your computer before the new settings will take effect.
Do you want to restart your computer now?
12. Click Yes button - ATI Desktop Help will appear upon restart, make changes as
necessary.
7
R
PCI-V264VT User’s Manual
Software MPEG & Video Player for Windows 95
Software MPEG allows the viewing of the following video files:
• MPEG Format: (*.MPG, *.DAT, *.MPV) Extensions
• AVI Files (*.AVI) Extensions
For Software MPEG support in Windows 95, you must first install DirectVideo Upgrade
For Microsoft Windows, then install ATI Video Player.
Installing Microsoft DirectVideo in Windows 95:
1. Reinsert the ASUS installation CD or select the CD from My Computer.
2. Click Install DirectX - Click
3. Restart Windows when finished.
Installing ATI Video Player in Windows 95:
1. Reinsert the ASUS installation CD or select the CD from My Computer.
2. Click Install Video Player - ATI Setup: ATI VIDEO PLAYER window appears.
3. Click the OK button - Installation complete message will appear
4. Click Restart Windows button when finished
The setup program will give you "ATI Multimedia" in your Programs group and start
button. The following icons will be available from the "Start" button once the driver has
successfully been installed. Click ATI Player to bring up the ATI Player screen.
8
R
PCI-V264VT User’s Manual
Video Driver Installation for Windows 3.x
For your convenience, the ATI video drivers for Windows 3.x can be installed in Win-
dows 3.x or in DOS. The autorun ASUS Windows 3.1 Install Shell cannot be automati-
cally run by Window 3.x, so manual execution is necessary.
Installing ATI video drivers in Windows 3.x:
1. Start Windows 3.x
2. Run File Manager
3. Insert the ASUS installation CD.
4. Change to your CD drive.
5. Double click setup.exe - ASUS Windows 3.1 Install Shell appears
6. Click on Install Windows 3.1 Display Driver- Confirm Installation appears
7. Click Yes - Copying Files appears - Restart Windows appears
8. Click Restart now to complete installation - ATI Desktop group and icon will ap-
pear upon restart - Install Shell Message appears:
Now installation process will continue. If you want to install Video for
Windows, please keep your ASUS driver CD in CD-ROM drive.
9. Click OK - Follow the instructions for Software MPEG & Video Player.
9
R
PCI-V264VT User’s Manual
Software MPEG & Video Player for Windows 3.x
Software MPEG allows the viewing of the following video files:
• MPEG Format: (*.MPG, *.DAT, *.MPV) Extensions
• AVI Files (*.AVI) Extensions
For Software MPEG support in Windows 3.x, you must first install Microsoft’s Video
for Windows, then install ATI Video Player.
Installing Microsoft Video for Windows in Windows 3.x:
1. Click on Install Video for Windows - Video for Windows 1.1 Runtime appears
2. Click Continue - Setup appears - Setup Successful appears
3. Click Restart now to complete installation
Installing ATI Video Player in Windows 3.x:
1. Run File Manager
2. Insert the ASUS installation CD.
3. Change to your CD drive.
4. Double click setup.exe - ASUS Windows 3.1 Install Shell appears
5. Click on Install Video Player - Memory Requirement appears:
The ATI Video Player needs at least 600K conventional memory to execute.
If you are not sure or memory is not enough, you can type “MEMMAKER”
under DOS to optimize your memory configuration.
6. Click Continue - ATI Setup: ATI VIDEO PLAYER appears with message
7. Click OK to start installation - Installation completed message appears.
8. Click OK to complete installation - Restart Windows? appears
9. Click Restart Windows button.
10. The Video Player icon will be added to the ATI Desktop menu.
10
R
PCI-V264VT User’s Manual
Video Driver Installation for Windows NT 4.0
Installing ATI Video drivers in Windows NT 4.0: (New Hardware Found)
If installing an ASUS Graphics device for the first time, a “New Hardware Found” win-
dow will appear upon entering Windows NT 4.0:
Select which driver you want to install for your new hardware:
Windows default driver
Driver from disk provided by hardware manufacturer
Do not install a driver (Windows will not prompt you again)
Select from a list of alternate drivers
1. ClickOKto use the default selection: “Driver from disk provided by hardware manu-
facturer”
2. Insert ASUS installation CD and click Browse button - Open windows appears.
3. Select you CD-ROM drive in the “Drives:” box
4. Select \nt40 directory - ati.inf shows in “File name:”
5. Click the OK button - Install from Disk appears - Click OK button again.
6. Select your device and language then click OK button - Copying Files... appears -
message appears to restart your computer.
7. Click Yes button - ATI Desktop Help will appear upon restart, make changes as
necessary.
Tabla de contenidos
Otros manuales de Tarjeta de video de Asus
Asus
Asus V7100 Manual de usuario
Asus
Asus EN8400GS SILENT/DI/512MD2(LP) Instrucciones de montaje
Asus
Asus G series Manual de usuario
Asus
Asus GeForce GTX 1650 OC 4GB Manual de usuario
Asus
Asus V7100/Pure Manual de usuario
Asus
Asus V8460 Series Manual de usuario
Asus
Asus A7000 Instrucciones de montaje
Asus
Asus RX 580 Manual de usuario
Asus
Asus TwinView V100 Series Manual de usuario
Asus
Asus AGP-V3000 Manual de usuario
Asus
Asus PhysX P1 Manual de usuario
Asus
Asus V3000 Series Manual de usuario
Asus
Asus EAX1600 Instrucciones de montaje
Asus
Asus Graphics Card A9200 Series Manual de usuario
Asus
Asus GeForce GTX 1660 TUF Gaming 6GB Manual de usuario
Asus
Asus MA3850 Manual de usuario
Asus
Asus Xonar HDAV 1.3 Deluxe Manual de usuario
Asus
Asus AGP-V6600 MX Manual de usuario
Asus
Asus AGP-V6600 MX Manual de usuario
Asus
Asus STRIX GTX1080 A8G GAMING Manual de usuario
Manuales populares de Tarjeta de video de otras marcas
Gainward
Gainward GeForce GTX 690 4GB Manual de usuario
ATI Technologies
ATI Technologies RADEON 137-40225-20 Manual de usuario
MSI
MSI N220GT series Manual de usuario
ATI Technologies
ATI Technologies RADEON 7000 MAC EDITION Manual de usuario
SIIG
SIIG aurora Manual de usuario
ClearSpeed
ClearSpeed ClearSpeed Advance e720 Manual de usuario
