Asus Audio Card Xonar D2 Manual de usuario
1
ASUS Xonar D2 Installation Guide
English
ASUS®Xonar D2
audio card
Installation Guide
2ASUS Xonar D2 Installation Guide
English
1.1 Installation requirements
To ensure a successful installation of the Xonar D2 audio card, your computer must
meet the following requirements:
• IBM compatible PC with one PCI 2.1 (or higher) compatible slot for the audio
card
• Microsoft®Windows®Vista/XP(32/64bit)/MCE2005
• Intel®Pentium® 4 1.4GHz or AMD K7 1400 CPU or faster CPU
• > 256 MB DRAM system memory
• > 60 MB available HDD space for driver installation package; >200MB space
available for Ableton Live and >320MB for Cakewalk package
• CD-ROM drive (or DVD-ROM drive) for software installation
• High-quality headphones, powered analog speakers, or digital speakers with
Dolby Digital or DTS decoders to enjoy the Ultra-High Fidelity sounds of the
card
Before the installation, check your ASUS Xonar D2 audio card package for the
following items:
• ASUS Xonar D2 audio card
• ASUS Xonar D2 support CD
ASUS®Xonar D2 installation
3
ASUS Xonar D2 Installation Guide
English
1.2 Card installation
To install ASUS Xonar audio card:
1. Touch the metal back or side panel of the computer to avoid static electricity.
2. Power OFF the computer, the monitor, and all other peripheral devices
connected to your computer.
3. Unplug the computer power cord from your computer and power outlet.
4. Remove the chassis cover.
5. Locate an empty PCI slot on the motherboard.
6. Align and insert the Xonar card into the PCI slot until it seats in place. Make
sure the goldngers are properly inserted to the slot.
7. Secure the bracket screw that holds the Xonar D2 audio card in place. Refer
to the picture below for the bracket screw hole.
8. Put back the chassis cover.
9. Reconnect all cables.
10. Plug the power cord to the computer and to a wall socket & power strip.
11. Power ON the computer.
1
2
4ASUS Xonar D2 Installation Guide
English
After installing the Xonar D2 audio card on your computer, you need to install
the device driver that enables the Xonar D2 audio card to work with Windows
operating system.
If you have already installed the ASUS Xonar D2 audio card, the Found New
Hardware Wizard window may pop up before or during driver installation. See
gure below.
1.3 Driver installation
To install the device driver:
1. Click Cancel from the Found New Hardware wizard window.
2. Insert the ASUS Xonar D2 support CD into your optical drive.
If autorun is enabled, the ASUS Xonar Card Driver screen appears
automatically. Go to step 5.
If Autorun is not enabled in your computer, perform step 3.
3. Click My Computer on your desktop and double-click the optical drive icon.
4. Double-click the setup.exe icon located on the optical drive.
5. Follow the on-screen instructions to complete the installation. Read the “END
USER LICENSE AGREEMENT” in the process and make sure that you
understand and accept it before continuing the installation.
6. When the installation nishes, you may be prompted to restart your computer.
You can choose to restart the computer later if desired.
The version and content of the driver CD are subject to change without notice.
1.3.1 Installing the Audio Card Driver
5
ASUS Xonar D2 Installation Guide
English
1.4 Connecting speakers
For Analog Spakers
2.1 Speakers
2 Speakers
6ASUS Xonar D2 Installation Guide
English
4 Speakers
4.1 Speakers
7
ASUS Xonar D2 Installation Guide
English
5.1 Speakers
6.1 Speakers
8ASUS Xonar D2 Installation Guide
English
For Digital Speakers
7.1 Speakers
SPDIF Out
You can also use a coaxial cable for a S/PDIF connection. Just plug the coaxial
RCA male connector to the S/PDIF-Out combo jack and connect the other end
into the coaxial S/PDIF input on your decoder.
Plug the optical TOSLINK adaptor into the S/PDIF-Out combo connector. Then,
connect your MD/CD/DVD player’s S/PDIF in port to the optical adaptor with the
TOSLINK optical cable
9
ASUS Xonar D2 Installation Guide
English
SPDIF In
Connecting headphone / microphone
You can also use a coaxial cable for a S/PDIF digital connection. Just plug the
coaxial RCA male connector to the S/PDIF-In combo jack and connect the other
end into the coaxial S/PDIF output on the player.
Plug the optical TOSLINK adaptor into the S/PDIF-In combo connector. Then,
connect your MD/CD/DVD player’s S/PDIF out port to the optical adaptor with the
TOSLINK optical cable
10 ASUS Xonar D2 Installation Guide
English
Connecting Line-In audio sources
Otros manuales para Audio Card Xonar D2
3
Tabla de contenidos
Otros manuales de Tarjeta de sonido de Asus
Asus
Asus Xonar U7 Manual de usuario
Asus
Asus Xonar U5 Manual de usuario
Asus
Asus HDAV1.3 - Xonar Slim Sound Card Manual de usuario
Asus
Asus Xonar D-Kara Manual de usuario
Asus
Asus Xonar U7 Manual de usuario
Asus
Asus XONAR PHOEBUS Manual de usuario
Asus
Asus Xonar U3 Manual de usuario
Asus
Asus Xonar DS Manual de usuario
Asus
Asus Xonar DGX Manual de usuario
Asus
Asus XONAR U7 MKII Manual de usuario
Asus
Asus Xonar DSX Manual de usuario
Asus
Asus Xonar DGX Manual de usuario
Asus
Asus XONAR ESSENCE STX - Sound Card - 192 kHz Manual de usuario
Asus
Asus Audio Card Xonar D2X Manual de usuario
Asus
Asus STRIX Series Manual de usuario
Asus
Asus XONAR U5 SI Manual de usuario
Asus
Asus XONAR PHOEBUS Manual de usuario
Asus
Asus MIO Manual de usuario
Asus
Asus Xonar DSX Manual de usuario
Asus
Asus Xonar D-Kara Manual de usuario
