Asus P8P67 WS Revolution Manual de usuario

Motherboard

P8P67 WS

Revolution

E6086

First Edition

November 2010

No part of this manual, including the products and software described in it, may be reproduced,

transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any

means, except documentation kept by the purchaser for backup purposes, without the express written

permission of ASUSTeK COMPUTER INC. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless

such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the

product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS

OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS

DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,

INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,

LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),

EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY

DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR

INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,

AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO

RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS

MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered trademarks or

copyrights of their respective companies, and are used only for identification or explanation and to the

owners’ benefit, without intent to infringe.

iii

Contents

Notices........................................................................................................ vii

Safety information .................................................................................... viii

About this guide ......................................................................................... ix

........................................ xi

Chapter 1: Product introduction

1.1 Welcome! ...................................................................................... 1-1

1.2 Package contents......................................................................... 1-1

1.3 Special features............................................................................ 1-2

1.3.1 Product highlights ........................................................... 1-2

1.3.2 ASUS Workstation Exclusive Features........................... 1-3

1.3.3 ASUS features ................................................................ 1-4

Chapter 2: Hardware information

2.1 Before you proceed ..................................................................... 2-1

2.2 Motherboard overview................................................................. 2-2

2.2.1 Motherboard layout ......................................................... 2-2

2.2.2 Layout contents............................................................... 2-3

2.2.2 Central Processing Unit (CPU) ....................................... 2-4

2.2.3 System memory .............................................................. 2-5

2.2.4 Expansion slots............................................................... 2-9

2.2.5 Onboard switches ..........................................................2-11

2.2.6 Onboard LEDs .............................................................. 2-13

2.2.7 Jumper .......................................................................... 2-15

2.2.8 Internal connectors ....................................................... 2-17

2.3 Building your computer system ............................................... 2-28

2.3.1 Additional tools and components to build a PC system 2-28

2.3.2 CPU installation ............................................................ 2-29

2.3.3 CPU heatsink and fan assembly installation................. 2-31

2.3.4 DIMM installation .......................................................... 2-33

2.3.5 Motherboard installation................................................ 2-34

2.3.6 ATX Power connection.................................................. 2-36

2.3.7 SATA device connection................................................ 2-37

2.3.8 Front I/O Connector ...................................................... 2-38

2.3.9 Expension Card installation .......................................... 2-39

Contents

2.3.10 Rear panel connection .................................................. 2-40

2.3.11 Audio I/O connections................................................... 2-41

 ...................................................... 2-44

2.5 Turning off the computer........................................................... 2-45

Chapter 3: BIOS setup

3.1 Knowing BIOS .............................................................................. 3-1

3.2 BIOS setup program .................................................................... 3-1

3.2.1 EZ Mode ......................................................................... 3-2

3.2.2 Advanced Mode .............................................................. 3-3

3.3 Main menu .................................................................................... 3-5

3.4 Ai Tweaker menu.......................................................................... 3-8

3.5 Advanced menu ......................................................................... 3-15

3.5.1 Trusted Computing........................................................ 3-15

3.5.2 CPU Configuration ........................................................ 3-16

3.5.3 PCH Configuration ........................................................ 3-18

3.5.4 SATA Configuration ....................................................... 3-18

3.5.5 USB Configuration ........................................................ 3-20

3.5.6 Onboard Devices Configuration.................................... 3-21

3.5.7 APM .............................................................................. 3-23

3.6 Monitor menu ............................................................................. 3-25

3.7 Boot menu .................................................................................. 3-28

3.8 Tool menu ................................................................................... 3-29

3.8.1 ASUS EZ Flash Utility ................................................... 3-29

3.8.2 ASUS O.C. Profile......................................................... 3-30

3.8.3 ASUS Drive Xpert ......................................................... 3-31

3.9 Exit menu.................................................................................... 3-32

3.10 Updating BIOS............................................................................ 3-33

3.10.1 ASUS Update utility ...................................................... 3-34

3.10.2 ASUS EZ Flash Utility ................................................... 3-37

3.10.3 ASUS CrashFree BIOS 3 utility .................................... 3-38

3.10.4 ASUS BIOS Updater..................................................... 3-39

Contents

Chapter 4: Software support

4.1 Installing an operating system ................................................... 4-1

4.2 Support DVD information ............................................................ 4-1

4.2.1 Running the support DVD ............................................... 4-1

4.2.2 Obtaining the software manuals ..................................... 4-2

4.3 Software information ................................................................... 4-3

4.3.1 AI Suite II ........................................................................ 4-3

4.3.2 DIGI+ VRM...................................................................... 4-4

4.3.3 TurboV EVO.................................................................... 4-6

4.3.4 EPU................................................................................4-11

4.3.5 FAN Xpert ..................................................................... 4-12

4.3.6 Probe II ......................................................................... 4-13

4.3.7 Audio configurations ..................................................... 4-14

  .................................................................. 4-16

4.4.1 RAID definitions ............................................................ 4-16

4.4.2 Installing Serial ATA hard disks ..................................... 4-17

4.4.3 Setting the RAID item in BIOS ...................................... 4-17

4.4.4 Intel®Rapid Storage Technology Option ROM utility .... 4-17

4.4.5 Marvell RAID utility........................................................ 4-21

4.5 Creating a RAID driver disk....................................................... 4-25

4.5.1 Creating a RAID driver disk without entering the OS.... 4-25

4.5.2 Creating a RAID driver disk in Windows®...................... 4-25

4.5.3 Installing the RAID driver

during Windows®OS installation................................... 4-26

4.5.4 Using a USB floppy disk drive....................................... 4-27

Chapter 5: Multiple GPU technology support

5.1 ATI®CrossFireX™ technology .................................................... 5-1

5.1.1 Requirements.................................................................. 5-1

5.1.2 Before you begin............................................................. 5-1

5.1.3 Installing CrossFireX graphics cards .............................. 5-2

5.1.4 Installing the device drivers............................................. 5-3

5.1.5 Enabling the ATI®CrossFireX™ technology ................... 5-3

5.2 NVIDIA®SLI™ technology ........................................................... 5-5

5.2.1 Requirements.................................................................. 5-5

Contents

5.2.2 Installing two SLI-ready graphics cards .......................... 5-6

5.2.3 Installing three SLI-ready graphics cards........................ 5-7

5.2.4 Installing the device drivers............................................. 5-8

5.2.5 Enabling the NVIDIA®SLI™ technology ......................... 5-8

5.3 NVIDIA®CUDA™ technology .................................................... 5-11

5.3.1 Requirements.................................................................5-11

5.3.2 Installing CUDA-ready graphics cards ...........................5-11

vii

Notices

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

• This device may not cause harmful interference, and

• This device must accept any interference received including interference that

may cause undesired operation.

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with manufacturer’s

instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment to an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Canadian Department of Communications Statement

This digital apparatus does not exceed the Class B limits for radio noise emissions

from digital apparatus set out in the Radio Interference Regulations of the

Canadian Department of Communications.

This class B digital apparatus complies with Canadian ICES-003.

The use of shielded cables for connection of the monitor to the graphics card is

required to assure compliance with FCC regulations. Changes or modifications

to this unit not expressly approved by the party responsible for compliance

could void the user’s authority to operate this equipment.

REACH

Complying with the REACH (Registration, Evaluation, Authorization, and

Restriction of Chemicals) regulatory framework, we published the chemical

substances in our products at ASUS website at http://csr.asus.com/english/

REACH.htm.

viii

Safety information

Electrical safety

• To prevent electrical shock hazard, disconnect the power cable from the

electrical outlet before relocating the system.

• When adding or removing devices to or from the system, ensure that the power

cables for the devices are unplugged before the signal cables are connected. If

possible, disconnect all power cables from the existing system before you add

a device.

• Before connecting or removing signal cables from the motherboard, ensure

that all power cables are unplugged.

• Seek professional assistance before using an adapter or extension cord.

These devices could interrupt the grounding circuit.

• Ensure that your power supply is set to the correct voltage in your area. If you

are not sure about the voltage of the electrical outlet you are using, contact

your local power company.

• If the power supply is broken, do not try to fix it by yourself. Contact a qualified

service technician or your retailer.

Operation safety

• Before installing the motherboard and adding devices on it, carefully read all

the manuals that came with the package.

• Before using the product, ensure all cables are correctly connected and the

power cables are not damaged. If you detect any damage, contact your dealer

immediately.

• To avoid short circuits, keep paper clips, screws, and staples away from

connectors, slots, sockets and circuitry.

• Avoid dust, humidity, and temperature extremes. Do not place the product in

any area where it may become wet.

• Place the product on a stable surface.

• If you encounter technical problems with the product, contact a qualified

service technician or your retailer.

DO NOT throw the motherboard in municipal waste. This product has been

designed to enable proper reuse of parts and recycling. This symbol of the

crossed out wheeled bin indicates that the product (electrical and electronic

equipment) should not be placed in municipal waste. Check local regulations for

disposal of electronic products.

DO NOT throw the mercury-containing button cell battery in municipal waste.

This symbol of the crossed out wheeled bin indicates that the battery should not

be placed in municipal waste.



Refer to the following sources for additional information and for product and

software updates.

1. ASUS websites

The ASUS website provides updated information on ASUS hardware and

software products. Refer to the ASUS contact information.

2. Optional documentation

Your product package may include optional documentation, such as warranty

flyers, that may have been added by your dealer. These documents are not

part of the standard package.

About this guide

This user guide contains the information you need when installing and configuring

the motherboard.

How this guide is organized

This guide contains the following parts:

• Chapter 1: Product introduction

This chapter describes the features of the motherboard and the new

technology it supports.

• Chapter 2: Hardware information

This chapter lists the hardware setup procedures that you have to perform

when installing system components. It includes description of the switches,

jumpers, and connectors on the motherboard.

• Chapter 3: BIOS setup

This chapter tells how to change system settings through the BIOS Setup

menus. Detailed descriptions of the BIOS parameters are also provided.

• Chapter 4: Software support

This chapter describes the contents of the support DVD that comes with the

motherboard package and the software.

• Chapter 5: Multiple GPU technology support

This chapter describes how to install and configure multiple ATI®

CrossFireX™ and NVIDIA®SLI™ graphics cards.

DANGER/WARNING: Information to prevent injury to yourself

when trying to complete a task.

CAUTION: Information to prevent damage to the components

when trying to complete a task.

NOTE: Tips and additional information to help you complete a

task.

IMPORTANT: Instructions that you MUST follow to complete a

task.

Conventions used in this guide

To ensure that you perform certain tasks properly, take note of the following

symbols used throughout this manual.

Typography

Bold text Indicates a menu or an item to select.

Italics

Used to emphasize a word or a phrase.

<Key> Keys enclosed in the less-than and greater-than sign

means that you must press the enclosed key.

Example: <Enter> means that you must press the

Enter or Return key.

<Key1+Key2+Key3> If you must press two or more keys simultaneously, the

key names are linked with a plus sign (+).

Example: <Ctrl+Alt+Del>

Command Means that you must type the command exactly as

shown, then supply the required item or value enclosed

in brackets.

Example: At the DOS prompt, type the command line:

BUPDATER /iP8P67WSREV.ROM

Otros manuales para P8P67 WS Revolution

Tabla de contenidos

Otros manuales de Placa madre de Asus

Asus

Asus ROG STRIX Z390-E GAMING Manual de usuario

Asus

Asus B85-PLUS Manual de usuario

Asus

Asus F2A85-M PRO Guía de inicio rápido

Asus

Asus UPX-EDGE-TGL01 Manual de usuario

Asus

Asus TUF GAMING B650-PLUS Manual de usuario

Asus

Asus Z9PR-D16 Manual de usuario

Asus

Asus P5P800 SE Manual de usuario

Asus

Asus SABERTOOTH Z97 MARK 1 Manual de usuario

Asus

Asus P4V533-MX Manual de usuario

Asus

Asus H370 MINING MASTER Manual de usuario

Asus

Asus Rampage IV GENE Manual de usuario

Asus

Asus ROG STRIX Z490-G GAMING WI-FI Manual de usuario

Asus

Asus Q370M2/CDM Manual de usuario

Asus

Asus PRO H310M-R R2.0 WI-FI/CSM Manual de usuario

Asus

Asus P4P8X SE Manual de usuario

Asus

Asus F1A75-I DELUXE Manual de usuario

Asus

Asus H170-PLUS D3 Manual de usuario

Asus

Asus M4A77D Manual de usuario

Asus

Asus PRIME X570-P Manual de usuario

Asus

Asus CUC2000 Manual de usuario

Asus

Asus F2A85-M/CSM Manual de usuario

Asus

Asus PRIME H610M-D Manual de usuario

Asus

Asus A7N266-VM AA Manual de usuario

Asus

Asus P5LD2-C IPAT Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

EPC

EPC EPC9147C Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manual de usuario

Epson

Epson S5U13700P00C000 Manual de usuario

Gigabyte

Gigabyte GA-K8N Ultra-SLI Manual de usuario

Albatron

Albatron PX925XE Series Manual de usuario