Asus M2NPV-VM Manual de usuario

Motherboard

M2NPV-VM

No part of this manual, including the products and software described in it, may be reproduced,

transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any

means, except documentation kept by the purchaser for backup purposes, without the express written

permission of ASUSTeK COMPUTER INC. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless

such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the

product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS

OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS

DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,

INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,

LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),

EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY

DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR

INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,

AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO

RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS

MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered trademarks or

copyrights of their respective companies, and are used only for identication or explanation and to the

owners’ benet, without intent to infringe.

E3046

First Edition V1

January 2007

iii

Contents

Notices......................................................................................................... vi

Safety information ..................................................................................... vii

M2NPV-VM specications summary.......................................................... x

Chapter 1: Product introduction

1.1 Special features............................................................................ 1-2

1.1.1 Product highlights ........................................................... 1-2

1.1.2 Innovative ASUS features .............................................. 1-4

1.2 Before you proceed ..................................................................... 1-5

1.3 Motherboard overview................................................................. 1-6

1.3.1 Motherboard layout ......................................................... 1-6

1.3.2 Placement direction ........................................................ 1-7

1.3.3 Screw holes .................................................................... 1-7

1.4 Central Processing Unit (CPU) ................................................... 1-8

1.4.2 Installing the heatsink and fan ...................................... 1-10

1.5 System memory ......................................................................... 1-12

1.5.1 Overview ....................................................................... 1-12

1.5.2 Memory congurations.................................................. 1-12

1.5.3 Installing a DIMM .......................................................... 1-18

1.5.4 Removing a DIMM ........................................................ 1-18

1.6 Expansion slots.......................................................................... 1-19

1.6.1 Installing an expansion card ......................................... 1-19

1.6.2 Conguring an expansion card ..................................... 1-19

Interrupt assignments................................................................... 1-20

1.6.3 PCI slots........................................................................ 1-21

1.6.4 PCI Express x1 slot....................................................... 1-21

1.6.5 PCI Express x16 slot..................................................... 1-21

1.7 Jumpers ...................................................................................... 1-22

1.8 Connectors ................................................................................. 1-25

1.8.1 Rear panel connectors.................................................. 1-25

1.8.2 Internal connectors ....................................................... 1-27

Contents

Chapter 2: BIOS setup

2.1 Managing and updating your BIOS ............................................ 2-2

2.1.1 ASUS Update utility ........................................................ 2-2

2.1.2 Creating a bootable oppy disk....................................... 2-4

2.1.3 ASUS EZ Flash utility...................................................... 2-5

2.1.4 Updating the BIOS .......................................................... 2-6

2.1.5 Saving the current BIOS le............................................ 2-8

2.1.6 ASUS CrashFree BIOS 2 utility ...................................... 2-9

2.2 BIOS setup program .................................................................. 2-10

2.2.1 BIOS menu screen.........................................................2-11

2.2.2 Menu bar........................................................................2-11

2.2.3 Legend bar.................................................................... 2-12

2.2.4 Menu items ................................................................... 2-12

2.2.5 Sub-menu items............................................................ 2-12

2.2.6 Conguration elds ....................................................... 2-12

2.2.7 Pop-up window ............................................................. 2-13

2.2.8 General help ................................................................. 2-13

2.3 Main menu .................................................................................. 2-14

2.3.1 System Time ................................................................. 2-14

2.3.2 System Date ................................................................. 2-14

2.3.3 Legacy Diskette A ......................................................... 2-14

2.3.4 Primary and Secondary IDE Master/Slave ................... 2-15

2.3.5 SATA 1-4 ....................................................................... 2-17

2.3.6 HDD SMART Monitoring ............................................... 2-18

2.3.7 Installed Memory........................................................... 2-18

2.3.8 Usable Memory............................................................. 2-18

2.4 Advanced menu ......................................................................... 2-19

2.4.1 CPU Conguration ........................................................ 2-19

2.4.2 Chipset.......................................................................... 2-20

2.4.3 PCIPnP ......................................................................... 2-21

2.4.4 Onboard Devices Conguration.................................... 2-22

2.4.5 USB Conguration ........................................................ 2-25

Contents

2.5 Power menu................................................................................ 2-26

2.5.1 ACPI Suspend Type...................................................... 2-26

2.5.2 ACPI APIC Support....................................................... 2-26

2.5.3 APM Conguration........................................................ 2-26

2.5.4 Hardware Monitor ......................................................... 2-29

2.6 Boot menu .................................................................................. 2-31

2.6.1 Boot Device Priority ...................................................... 2-31

2.6.2 Removable Drives......................................................... 2-31

2.6.3 Boot Settings Conguration ......................................... 2-32

2.6.6 Security ......................................................................... 2-34

2.7 Exit menu.................................................................................... 2-36

Notices

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

•

This device may not cause harmful interference, and

•

This device must accept any interference received including interference that

may cause undesired operation.

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with manufacturer’s

instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following

measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment to an outlet on a circuit different from that to which the

receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

Canadian Department of Communications Statement

This digital apparatus does not exceed the Class B limits for radio noise emissions

from digital apparatus set out in the Radio Interference Regulations of the

Canadian Department of Communications.

This class B digital apparatus complies with Canadian

ICES-003.

The use of shielded cables for connection of the monitor to the graphics card is

required to assure compliance with FCC regulations. Changes or modications

to this unit not expressly approved by the party responsible for compliance

could void the user’s authority to operate this equipment.

vii

Safety information

Electrical safety

•

To prevent electrical shock hazard, disconnect the power cable from the

electrical outlet before relocating the system.

•

When adding or removing devices to or from the system, ensure that the power

cables for the devices are unplugged before the signal cables are connected. If

possible, disconnect all power cables from the existing system before you add

a device.

•

Before connecting or removing signal cables from the motherboard, ensure

that all power cables are unplugged.

•

Seek professional assistance before using an adapter or extension cord.

These devices could interrupt the grounding circuit.

•

Make sure that your power supply is set to the correct voltage in your area. If

you are not sure about the voltage of the electrical outlet you are using, contact

your local power company.

•

If the power supply is broken, do not try to x it by yourself. Contact a qualied

service technician or your retailer.

Operation safety

•

Before installing the motherboard and adding devices on it, carefully read all

the manuals that came with the package.

•

Before using the product, make sure all cables are correctly connected and the

power cables are not damaged. If you detect any damage, contact your dealer

immediately.

•

To avoid short circuits, keep paper clips, screws, and staples away from

connectors, slots, sockets and circuitry.

•

Avoid dust, humidity, and temperature extremes. Do not place the product in

any area where it may become wet.

•

Place the product on a stable surface.

•

If you encounter technical problems with the product, contact a qualied

service technician or your retailer.

The symbol of the crossed out wheeled bin indicates that the product (electrical

and electronic equipment) should not be placed in municipal waste. Please

check local regulations for disposal of electronic products.

viii

About this guide

This user guide contains the information you need when installing and conguring

the motherboard.

How this guide is organized

This manual contains the following parts:

• Chapter 1: Product introduction

This chapter describes the features of the motherboard and the new

technology it supports. This chapter also lists the hardware setup procedures

that you have to perform when installing system components. It includes

description of the jumpers and connectors on the motherboard.

• Chapter 2: BIOS setup

This chapter tells how to change system settings through the BIOS Setup

menus. Detailed descriptions of the BIOS parameters are also provided.

Where to nd more information

Refer to the following sources for additional information and for product and

software updates.

1. ASUS websites

The ASUS website provides updated information on ASUS hardware and

software products. Refer to the ASUS contact information.

2. Optional documentation

Your product package may include optional documentation, such as warranty

yers, that may have been added by your dealer. These documents are not

part of the standard package.

Conventions used in this guide

To make sure that you perform certain tasks properly, take note of the following

symbols used throughout this manual.

DANGER/WARNING: Information to prevent injury to yourself

when trying to complete a task.

CAUTION: Information to prevent damage to the components

when trying to complete a task.

NOTE: Tips and additional information to help you complete a

task.

IMPORTANT: Instructions that you MUST follow to complete a

task.

Typography

Bold text Indicates a menu or an item to select.

Italics

Used to emphasize a word or a phrase.

<Key> Keys enclosed in the less-than and greater-than

sign means that you must press the enclosed key.

Example: <Enter> means that you must press the

Enter or Return key.

<Key1+Key2+Key3> If you must press two or more keys simultaneously,

the key names are linked with a plus sign (+).

Example: <Ctrl+Alt+D>

Command Means that you must type the command

exactly as shown, then supply the required

item or value enclosed in brackets.

Example: At the DOS prompt, type the command line:

awdash M2NPVVM.bin

M2NPV-VM specications summary

(continued on the next page)

CPU Support AMD socket AM2 for AMD Athlon™ 64FX/

Athlon™ 64 X2/Athlon™ 64/Sempron processors

AMD64 architecture enables simultaneous 32-bit and

64-bit computing

Supports AMD Cool ‘n’ Quiet™ Technology

AMD Live!™ Ready

Chipset Northbridge: NVIDIA®GeForce™ 6150 GPU

Southbridge: NVIDIA®nForce™430 MCP

Front side bus 2000/1600 MT/s

Memory Dual-channel memory architecture 4 x 240-pin DIMM

sockets support up to 8 GB of unbufferred

non-ECC 800/667/533 MHz DDR2 memory modules

Expansion slots 1 x PCI Express™ x16 slot

1 x PCI Express™ x1 slot

2 x PCI slots

Graphics Integrated in the NVIDIA®GeForce™ 6 Graphics

Processing Unit (GPU)

Dual VGA output DVI-D and RGB

High definition video processing with maximum

resolution of 1920 x 1440 pixels (@75Hz) for RGB

display

Note: DVI-D only supports digital display. You cannot

convert DVI-D to output RGB signal to CRT display.

TV-out: SDTV& HDTV (with TV-Out module) (optional)

Note: RGB and TV-Out cannot be used simultaneously.

Storage NVIDIA®nForce™430 media and communications

processor (MCP) supports:

- 2 x Ultra DMA 133/100/66/33 interfaces for four

(4) hard disk drives

- 4 x Serial ATA 3 Gb/s hard disk drives supporting

RAID 0, RAID 1, RAID 0+1, RAID 5, and JBOD

configuration

High Denition Audio SoundMAX®ADI AD1986A 5.1-channel CODEC

Supports Jack Sensing technology

S/PDIF out interface (optional)

LAN NVIDIA®nForce™430 built-in Gigabit MAC with external

Marvell®PHY

USB Supports up to 8 USB 2.0 ports

Otros manuales para M2NPV-VM

Tabla de contenidos

Otros manuales de Placa madre de Asus

Asus

Asus STRIX Z270G GAMING Manual de usuario

Asus

Asus Motherboard P5LD2-VM DH Manual de usuario

Asus

Asus Motherboard P5PL2 Guía de inicio rápido

Asus

Asus PRIME H610M-E Manual de usuario

Asus

Asus P8Z77-M PRO Manual de usuario

Asus

Asus AAEON UP-POE01 Manual de usuario

Asus

Asus PRIME B760M-A WIFI D4 Manual de usuario

Asus

Asus H110I-PLUS D3 Manual de usuario

Asus

Asus PRIME B550M-K Manual de usuario

Asus

Asus M5A99X EVO Manual de usuario

Asus

Asus N3050I-CM-A Manual de usuario

Asus

Asus P4B-LS Manual de usuario

Asus

Asus P5W DH Manual de usuario

Asus

Asus P2/370A Manual de usuario

Asus

Asus RAMPAGE V EDITION 10 Manual de usuario

Asus

Asus Z97-Deluxe/USB 3.1 Manual de usuario

Asus

Asus Motherboard A8N-SLI Premium Manual de usuario

Asus

Asus P5N-EM HDMI Manual de usuario

Asus

Asus INTEL TUSL2-M Manual de usuario

Asus

Asus P5P800 SE Manual de usuario

Asus

Asus Z11PA-U12 series Manual de usuario

Asus

Asus H110M-K Manual de usuario

Asus

Asus A7V400-MX SE Manual de usuario

Asus

Asus ROG STRIX B350-F GAMING Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

EPC

EPC EPC9147C Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manual de usuario

Epson

Epson S5U13700P00C000 Manual de usuario

Gigabyte

Gigabyte GA-K8N Ultra-SLI Manual de usuario

Albatron

Albatron PX925XE Series Manual de usuario