Asus GRYPHON Z97 ARMOR EDITION Manual de usuario
2
E9382
First Edition
May 2014
Copyright © 2014 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced, transmitted,
transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except
documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK
COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless such
repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced
or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL,
OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS,
LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS
MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND
SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR
LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE
PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of
their respective companies, and are used only for identication or explanation and to the owners’ benet, without
intent to infringe.
3
Contents
Contents....................................................................................................................... 3
Package contents........................................................................................................ 4
Installing the assistant fan ......................................................................................... 5
Installing the Dust Defenders..................................................................................... 6
Installing the DIMM slot covers ....................................................................... 6
Installing the PCIe x16 and PCIe x1 slot covers ............................................. 6
Installing the onboard connector caps ............................................................ 6
Installing the back I/O caps............................................................................. 7
Installing the back I/O dust lter...................................................................... 7
Installing the Thermistor cable .................................................................................. 8
Contact Information .................................................................................................... 9
4
Package contents
Check your GRYPHON Z97 ARMOR EDITION motherboard package for the following items:
• If any of the above items is damaged or missing, contact your retailer.
• To support various models, your TUF Connector Dust Defenders package may include
additional onboard connector caps and back I/O port caps.
• The illustrated items above are for reference only.
TUF Accessory package TUF Connector Dust Defenders package
2 x DIMM slot covers
3 x PCIe x16 slot covers
1 x PCIe x1 slot covers
2 x short screws
1 x Connector cap set
(LAN cap, HDMI cap, DVI cap,
DP cap, Front USB 3.0 cap)
1 x Dust Frame
1 x Dust Grid
2 x Onboard USB 2.0
connector caps
8 x Back I/O USB 3.0/2.0
connector caps
5 x Audio connector caps
7 x SATA connector caps
3 x Thermistor cables 1 x 40 mm Assistant fan 1 x Accessory installation guide
(this document)
5
2. Get the bundled 40 mm assistant fan and position
it to an orientation where its THE ULTIMATE
FORCE logo is facing towards the back I/O shield.
3. Match the two screw holes on the 40 mm assistant
fan with the two screw holes on the cover lid and
secure it with the bundled set of two (2) screws.
Installing the assistant fan
The GRYPHON Z97 ARMOR EDITION motherboard package comes with a 40 mm assistant fan for
additional cooling solution and better airow.
To install the 40 mm assistant fan:
4. Align and insert the cover lid and the assistant fan
assembly into the Thermal Armor and secure it with
the screw that you removed in step 1.
Ensure to tuck the fan cable inside the cable
corner slot.
5. Connect the fan cable connector to the assistant
fan (ASST_FAN2) header on the motherboard.
6. Launch the Thermal Radar 2 utility on your
computer to adjust the fan’s behavior.
For more information about the Thermal Radar 2
utility, refer to your motherboard’s user guide.
Fan cable corner slot
1. Locate and remove the screw on the back I/O (A)
then remove the back I/O fan cover lid (B).
Keep the screw for later use.
6
Installing the Dust Defenders
The Dust Defenders are designed to prevent dust and small particles from building up in the
motherboard’s expansion and memory slots or connectors.
Installing the DIMM slot covers
Install the DIMM slot covers into unused DIMM slots on your motherboard.
Installing the PCIe x16 and PCIe x1 slot covers
Install the PCIe x16 or PCIe x1 slot covers into unused PCIe x16 or PCIe x1 slots on your
motherboard.
PCIe x1 slot cover
PCIe x16 slot cover
Installing the onboard connector caps
Install the onboard connector caps into unused SATA or Onboard USB 3.0/2.0 connectors on your
motherboard.
To support various models, your package may include additional onboard connector caps for your
motherboard.
7
Clean your back I/O dust lter from time to time, especially when it is dirty to ensure optimum
airow.
Installing the back I/O dust filter
The back I/O dust lter helps reduce the intake of dust and small particles into the system
To install the back I/O dust lter:
Back I/O dust frame
Back I/O dust grid
I/O shield
1. Match and align four holes of the back I/O dust
grid and four fasteners of the back I/O dust
frame then attach the dust grid to the dust
frame.
2. Match and align the four fasteners of the back
I/O dust frame and grid assembly to the four
circular holes on the back I/O fan vent of the
I/O shield then push to fasten the back I/O dust
grid into the I/O shield with the back I/O dust
frame.
Installing the back I/O caps
The GRYPHON Z97 ARMOR EDITION accessory package takes protection to the next level with
the back I/O port caps.
Refer to the illustrated guide for the proper placement of back I/O caps:
To support various models, your package may include additional back I/O port caps for your
motherboard.
8
Installing the Thermistor cable
The Thermistor cable works together with the Thermal Radar 2 utility to allow you to monitor the
temperature of selected devices or critical components inside your motherboard.
To install the Thermistor cable:
1. Locate the thermal sensor headers labeled
T_SENSOR1, T_SENSOR2, or T_SENSOR3
on your motherboard then connect the
thermistor cable connector to any of these
headers.
2. Put the thermistor sensor in contact with the
surface of the component or part you want to
monitor and secure it with an adhesive tape.
The adhesive tape is purchased separately.
The Thermistor sensor operating
temperature ranges from 0oC – 80oC.
3. Launch the Thermal Radar 2 utility on your
computer.
Thermistor sensor
Thermistor
connector
9
Contact Information
ASUSTeK COMPUTER INC.
Address 15 Li-Te Road, Peitou, Taipei, Taiwan 11259
Telephone +886-2-2894-3447
Fax +886-2-2890-7798
E-mail [email protected]
Web site http://www.asus.com
Technical Support
Telephone +86-21-3842-9911
Fax +86-21-5866-8722, ext. 9101#
Online support http://support.asus.com/techserv/techserv.aspx
ASUS COMPUTER INTERNATIONAL (America)
Address 800 Corporate Way, Fremont, CA 94539, USA
Telephone +1-510-739-3777
Fax +1-510-608-4555
Web site http://usa.asus.com
Technical Support
Support fax +1-812-284-0883
General support +1-812-282-2787
Online support http://support.asus.com/techserv/techserv.aspx
ASUS COMPUTER GmbH (Germany and Austria)
Address Harkort Str. 21-23, 40880 Ratingen, Deutschland
Fax +49-2102-959931
Web site http://www.asus.de
Online contact http://eu-rma.asus.com/sales
Technical Support
Telephone +49-2102-5789555
Support Fax +49-2102-959911
Online support http://support.asus.com/techserv/techserv.aspx
Where to find more information
Visit www.asus.com for additional information and product updates.
15060-314P0000
10
Otros manuales para GRYPHON Z97 ARMOR EDITION
2
Tabla de contenidos
Otros manuales de Placa madre de Asus
Asus
Asus PRIME X370-PRO Manual de usuario
Asus
Asus P/I-P55T2P4 Manual de usuario
Asus
Asus H61M-C/SI Manual de usuario
Asus
Asus H61M-D Manual de usuario
Asus
Asus P8H61 R2.0 Series Manual de usuario
Asus
Asus TUF B350M-PLUS GAMING Manual de usuario
Asus
Asus E2938 Instrucciones de uso
Asus
Asus P8Z77-I DELUXE Manual de usuario
Asus
Asus P5B Manual de usuario
Asus
Asus Pro A520M-C Manual de usuario
Asus
Asus ROG MAXIMUS X HERO Manual de usuario
Asus
Asus K8N-DRE - Motherboard - Extended ATX Manual de usuario
Asus
Asus P5Q SE2 Manual de usuario
Asus
Asus MEB-M Manual de usuario
Asus
Asus P7P55D PREMIUM Manual de usuario
Asus
Asus A8R-MVP Manual de usuario
Asus
Asus SP97 Manual de usuario
Asus
Asus ITX 220 - Motherboard - Mini ITX Manual de usuario
Asus
Asus TUF GAMING H770-PRO WIFI Manual de usuario
Asus
Asus B85-PRO GAMER Manual de usuario
Manuales populares de Placa madre de otras marcas
Texas Instruments
Texas Instruments ADS8372EVM Manual de usuario
Commell
Commell MS-C73 Manual de usuario
IBT Technologies
IBT Technologies MB860 Manual de usuario
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manual de usuario
Biostar
Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación
Intel
Intel D33217CK Manual de usuario
