Asus A7S266-VM U2 Manual de usuario

Motherboard

A7S266-VM/U2

User Guide

No part of this manual, including the products and software described in it, may be

reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any

language in any form or by any means, except documentation kept by the purchaser for

backup purposes, without the express written permission of ASUSTeK COMPUTER INC.

(“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modified or

altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2)

the serial number of the product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER

EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES

OR CONDITIONS OF MERCHANTABILITY OR FITNESS FORA PARTICULAR PURPOSE.

IN NO EVENT SHALLASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE

LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES

(INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE

OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN

ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR

ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUALARE FURNISHED

FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGEATANY TIME

WITHOUT NOTICE,AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BYASUS.

ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR

INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS

AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered

trademarks or copyrights of their respective companies, and are used only for identification or

explanation and to the owners’ benefit, without intent to infringe.

E1191

First Edition V1

January 2003

iii

Contents

Notices ............................................................................................v

Safety information ..........................................................................vi

About this guide............................................................................. vii

ASUS contact information ............................................................ viii

A7S266-VM/U2 specifications summary ........................................ix

Chapter 1: Product introduction

1.1 Welcome! ........................................................................... 1-2

1.2 Package contents............................................................... 1-2

1.3 Motherboard components .................................................. 1-3

1.4 Motherboard layout ............................................................ 1-6

1.5 Before you proceed ............................................................ 1-7

1.6 Motherboard installation ..................................................... 1-8

1.6.1 Placement direction ............................................... 1-8

1.6.2 Screw holes ........................................................... 1-8

1.7 Central Processing Unit (CPU)........................................... 1-9

1.7.1 Installing the CPU .................................................. 1-9

1.8 System memory ............................................................... 1-10

1.9 Expansion slots .................................................................1-11

1.9.1 Configuring an expansion card.............................1-11

1.9.2 Standard interrupt assignments ............................1-11

1.10 Jumpers............................................................................ 1-12

1.11 Connectors ....................................................................... 1-13

Chapter 2: BIOS information

2.1 Managing and updating your BIOS .................................... 2-2

2.1.1 Using ASUS EZ Flash to update the BIOS ............ 2-2

2.1.2 Using AFLASH to update the BIOS ....................... 2-4

2.1.3 CrashFree BIOS 2 (BIOS Auto-recovery procedure).. 2-7

2.2 BIOS Setup program .......................................................... 2-8

2.2.1 BIOS menu bar ...................................................... 2-8

2.2.2 Legend bar............................................................. 2-9

Contents

2.3 Main Menu........................................................................ 2-10

2.3.1 Primary and Secondary Master/Slave ................. 2-12

2.3.2 Keyboard Features .............................................. 2-14

2.4 Advanced Menu ............................................................... 2-15

2.4.1 Chip Configuration ............................................... 2-16

2.4.2 I/O Device Configuration...................................... 2-18

2.4.3 PCI Configuration ................................................ 2-19

2.5 Power Menu ..................................................................... 2-21

2.5.1 Power Up Control ................................................ 2-22

2.5.2 Hardware Monitor ................................................ 2-23

2.6 Boot Menu ........................................................................ 2-24

2.7 Exit Menu ......................................................................... 2-26

Chapter 3: Software support

3.1 Install an operating system................................................. 3-2

3.2 Support CD information...................................................... 3-2

3.2.1 Running the support CD ........................................ 3-2

3.2.2 Drivers menu ......................................................... 3-3

3.2.3 Utilities menu ......................................................... 3-3

3.2.4 ASUS Contact Information..................................... 3-4

Notices

Federal Communications Commission Statement

This device complies with FCC Rules Part 15. Operation is subject to the

following two conditions:

• This device may not cause harmful interference, and

• This device must accept any interference received including interference

that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with

manufacturer’s instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment to an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Canadian Department of Communications Statement

This digital apparatus does not exceed the Class B limits for radio noise

emissions from digital apparatus set out in the Radio Interference

Regulations of the Canadian Department of Communications.

This class B digital apparatus complies with Canadian ICES-003.

The use of shielded cables for connection of the monitor to the

graphics card is required to assure compliance with FCC regulations.

Changes or modifications to this unit not expressly approved by the

party responsible for compliance could void the user’s authority to

operate this equipment.

Safety information

Electrical safety

• To prevent electrical shock hazard, disconnect the power cable from

the electrical outlet before relocating the system.

• When adding or removing devices to or from the system, ensure that

the power cables for the devices are unplugged before the signal

cables are connected. If possible, disconnect all power cables from the

existing system before you add a device.

• Before connecting or removing signal cables from the motherboard,

ensure that all power cables are unplugged.

• Seek professional assistance before using an adpater or extension

cord. These devices could interrupt the grounding circuit.

• Make sure that your power supply is set to the correct voltage in your

area. If you are not sure about the voltage of the electrical outlet you

are using, contact your local power company.

• If the power supply is broken, do not try to fix it by yourself. Contact a

qualified service technician or your retailer.

Operation safety

• Before installing the motherboard and adding devices on it, carefully

read all the manuals that came with the package.

• Before using the product, make sure all cables are correctly connected

and the power cables are not damaged. If you detect any damage,

contact your dealer immediately.

• To avoid short circuits, keep paper clips, screws, and staples away from

connectors, slots, sockets and circuitry.

• Avoid dust, humidity, and temperature extremes. Do not place the

product in any area where it may become wet.

• Place the product on a stable surface.

• If you encounter technical problems with the product, contact a

qualified service technician or your retailer.

vii

Where to find more information

Refer to the following sources for additional information and for product

and software updates.

1. ASUS Websites

The ASUS websites worldwide provide updated information on ASUS

hardware and software products. The ASUS websites are listed in the

ASUS Contact Information on page viii.

2. Optional Documentation

Your product package may include optional documentation, such as

warranty flyers, that may have been added by your dealer. These

documents are not part of the standard package.

About this guide

Conventions used in this guide

To make sure that you perform certain tasks properly, take note of the

following symbols used throughout this manual.

WARNING/DANGER: Information to prevent injury to yourself

when trying to complete a task.

CAUTION: Information to prevent damage to the components

when trying to complete a task.

IMPORTANT: Information that you MUST follow to complete a

task.

NOTE: Tips and additional information to aid in completing a task.

viii

ASUS contact information

ASUSTeK COMPUTER INC. (Asia-Pacific)

Address: 150 Li-Te Road, Peitou, Taipei, Taiwan 112

General Tel: +886-2-2894-3447

General Fax: +886-2-2894-3449

General Email: [email protected]

Technical Support

MB/Others (Tel): +886-2-2890-7121 (English)

Notebook (Tel): +886-2-2890-7122 (English)

Desktop/Server (Tel): +886-2-2890-7123 (English)

Support Fax: +886-2-2890-7698

Support Email: [email protected]

Web Site: www.asus.com.tw

ASUS COMPUTER INTERNATIONAL (America)

Address: 6737 Mowry Avenue, Mowry Business Center,

Building 2, Newark, CA 94560, USA

General Fax: +1-510-608-4555

General Email: [email protected]

Technical Support

Support Fax: +1-510-608-4555

General Support: +1-502-933-8713

Web Site: www.asus.com

Support Email: [email protected]

ASUS COMPUTER GmbH (Germany and Austria)

Address: Harkortstr. 25, 40880 Ratingen, BRD, Germany

General Fax: +49-2102-442066

General Email: [email protected] (for marketing requests only)

Technical Support

Support Hotline: MB/Others: +49-2102-9599-0

Notebook (Tel): +49-2102-9599-10

Support Fax: +49-2102-9599-11

Support (Email): www.asuscom.de/de/support (for online support)

Web Site: www.asuscom.de

A7S266-VM/U2 specifications summary

CPU

Chipset

Front Side Bus (FSB)

Memory

Expansion slots

IDE

Audio (optional)

VGA

LAN (optional)

Special Features

Back Panel I/O Ports

Internal I/O

Connectors

(continued on the next page)

Socket A for AMD Athlon XP/Athlon/Duron 2 GHz+

Thoroughbred core CPU ready

Northbridge: SiS 740

Southbridge: SiS 962L

266/200Mhz

2 x DDR DIMM Sockets

Max. 2 GB unbuffered PC2100/1600 non-ECC DDR SDRAM

2 x SDR DIMM Sockets

Max. 2 GB unbuffered PC133/100 non-ECC SDRAM

(Note: DDR and SDR memory cannot be used on A7S266-

VM/U2 simultaneously.)

4 x PCI

2 x UltraDMA 133/100/66

C-media 4-channel CODEC

S/PDIF-out interface

Integrated 4X AGP Graphics

SiS 962L integrated 10/100Mbps Fast Ethernet with Realtek

external PHY

Power Loss Restart

ASUS Jumperfree

SFS (Stepless Frequency Selection)

support S/PDIF out interface (on audio model only)

ASUS C.O.P. (CPU Overheating Protection)

CrashFree BIOS 2

1 x Parallel

1 x Serial

1 x VGA

1 x PS/2 Keyboard

1 x PS/2 Mouse

1 x Audio I/O, Game/MIDI (on audio model only)

2 x USB 2.0

1 x RJ-45 Port (on LAN model only)

CPU/Chassis FAN connector

20 pin ATX power connector

IDE LED connector

SIR

COM2 port

S/PDIF out connector (on audio model only)

CD/AUX audio in (on audio model only)

Front panel audio connector (on audio model only)

2 x USB 2.0 connector supports additional 4 USB 2.0 ports

BIOS features

Industry standard

Manageability

Form Factor

Support CD contents

Accessories

A7S266-VM/U2 specifications summary

* Specifications are subject to change without notice.

2Mb Flash ROM, CrashFree BIOS 2, EEPROM, ASUS

JumperFree, Award BIOS with ACPI, DMI2.0, PnP, WfM2.0,

Green, TCAV (Trend Chip Away Virus)

PCI 2.2, USB 2.0

WfM2.0, DMI2.0, WOR, WOL

Micro-ATX form factor: 9.6 in x 9.6 in (24.5 cm x 24.5 cm)

Device drivers

ASUS PC Probe

Trend Micro

PC-cillin 2002 anti-virus software

ASUS LiveUpdate Utility

User’s manual

Support CD

1 x UltraDMA 133/100/66 cable

FDD cable

COM2 cable

I/O shield

Otros manuales para A7S266-VM U2

Tabla de contenidos

Otros manuales de Placa madre de Asus

Asus

Asus Motherboard PR-DLS533 Manual de usuario

Asus

Asus F1A75-M LE Manual de usuario

Asus

Asus P11C-I Manual de usuario

Asus

Asus P5P800-VM Manual de usuario

Asus

Asus SABERTOOTH Z170 MARK 1 Manual de usuario

Asus

Asus M5A99X EVO Manual de usuario

Asus

Asus B150M-A D3 Manual de usuario

Asus

Asus A8N-VM Manual de usuario

Asus

Asus M2N-VM - Motherboard - Micro ATX Manual de usuario

Asus

Asus A7N8X-VM 400 Manual de usuario

Asus

Asus J3455M-E Manual de usuario

Asus

Asus CUC2 Manual de usuario

Asus

Asus P5N-EM HDMI Manual de usuario

Asus

Asus Z170-A Manual de usuario

Asus

Asus M5A78L-M LE Manual de usuario

Asus

Asus CUW-AM Manual de usuario

Asus

Asus P5E3 WS Professional Manual de usuario

Asus

Asus P4B-E Manual de usuario

Asus

Asus ROG STRIX Z490-H GAMING Manual de usuario

Asus

Asus P8P67 LE Manual de usuario

Asus

Asus Prime H110M2 Manual de usuario

Asus

Asus P5N73-AM Manual de usuario

Asus

Asus P4S533 Manual de usuario

Asus

Asus P4P800-E DELUXE Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

EPC

EPC EPC9147C Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manual de usuario

Epson

Epson S5U13700P00C000 Manual de usuario

Gigabyte

Gigabyte GA-K8N Ultra-SLI Manual de usuario

Albatron

Albatron PX925XE Series Manual de usuario