Assmann Digitus DN-13024 Manual de usuario
2-PORT USB 2.0 WIRELESS MULTI-
FUNCTIONAL NETWORK SERVER,
300 Mbps
Manual
DN-13024
2
CONTENTS
Safety Precautions..........................................................................................4
PRODUCT OVERVIEW......................................................................................4
Package Contents ............................................................................................... 4
Features .............................................................................................................. 5
Product Hardware Features................................................................................ 6
Front view ........................................................................................................... 6
Side view ............................................................................................................. 7
Application Diagram ........................................................................................... 8
UTILITY INSTALLATION....................................................................................9
Windows Installation .......................................................................................... 9
CONNECTING THE DEVICE ............................................................................. 10
IP Address ......................................................................................................... 10
Methods for Setting the IP Address.................................................................. 10
Setting the IP Address Using the Control Center.............................................. 11
Server Names and Server Name Rules ............................................................. 12
WIRELESS CONNECTION................................................................................ 13
Preliminary........................................................................................................ 13
Set Wireless Configuration Using Control Center............................................. 13
Scan AP setting ................................................................................................. 15
WPS Mode setting ............................................................................................ 17
WPS Mode setting ............................................................................................ 18
3
USING THE USB DEVICE SERVER .................................................................... 19
Introduction ...................................................................................................... 19
Connect & Disconnect ...................................................................................... 19
Subnet Issue...................................................................................................... 20
Installation of USB Device Driver ...................................................................... 20
Using the USB Device Server ............................................................................ 22
Auto-Connect Printer........................................................................................ 23
Network Scanner .............................................................................................. 26
USB Storage ...................................................................................................... 27
Request to Connect .......................................................................................... 27
Quitting the Control Center.............................................................................. 28
Limitations ........................................................................................................ 28
RESTORE FACTORY DEFAULTS ....................................................................... 29
Using the Server’s Web Pages .......................................................................... 29
UPGRADE FIRMWARE................................................................................... 29
Using the Control Center .................................................................................. 29
Using Init /WPS Button ..................................................................................... 30
Default Parameters List .................................................................................... 31
THE SERVER’S WEB PAGES ............................................................................ 31
Introduction ...................................................................................................... 31
Management Page Structure............................................................................ 31
Technical Description........................................................................................ 32
4
Safety Precautions
•Only use the device within the specified temperature range for: 0 ~ 40°C
•When not in use, store the product in a clean and dry place in temperatures between
0°C and 40°C
•Do not let the indoor devices come into contact with liquids
•Ensure that the indoor devices are only used inside. These devices are not intended
for outdoor use and would be damaged
•During thunderstorms, there is a danger of lightning strike and due to overvoltage
damage to connected electrical appliances
•Do not install the product during a thunderstorm
•Disconnect the product from power source during a thunderstorm
•Keep the devices outside the reach of children, since these components can be
dangerous
•Never try to repair the device by yourself. Repair and maintenance work must be
carried out by specialists
•In case of problems contact our customer service
•Dust, humidity and vapours as well as sharp cleaning agents or solvents can damage
the product
•Disconnect the product from the power source before cleaning
•Clean the product with a slightly damp, lint-free cloth
PRODUCT OVERVIEW
Package Contents
In addition to the print server, the package includes:
•2-Port USB 2.0 Wireless Multi-Functional Network Server, 300 Mbps
•AC Adaptor: Input AC100V~240V 50/60Hz , Output DC 5V,2A
•CD ROM
•Quick Installation Guide
If any package contents are missing or damaged, please contact the
retail store, online retailer, or reseller/distributor that the item was purchased.
5
Features
2-Port USB 2.0 Wireless Multi-Functional Network Server, 300 Mbps, model 2-Port USB
2.0 Wireless Multi-Functional Network Server, transforms most stand-alone multi-
function and standard USB printers into a shared network resource. Install your
multifunction printer in the most ergonomic location and then connect the compact 2-
Port USB 2.0 Wireless Multi-Functional Network Server to a high speed Wireless N
network.
An intuitive utility supports Windows and Mac operating systems and provides a
seamless user experience. Scan, fax, and print functionality from any networked
workstation. Integrated Wireless N provides greater installation flexibility. An Ethernet
port facilitates optional wired networking. Wi-Fi Protected Setup (WPS) streamlines the
process of connecting to a wireless network. This compact device fits into the smallest
spaces.
•1 x 10/100Mbps Auto-MDIX Fast Ethernet port (for optional wired installation)
•2 x USB 2.0 high speed port
•Wi-Fi Protected Setup (WPS) connects to wireless networks at the push of a button
•Based on IEEE 802.11n technology and compliant with IEEE 802.11b/g standards
•High-speed data rates of up to 150Mbps with IEEE 802.11n*
•Backwards Compatible with USB 1.1 Devices
•Control Center utility supports Windows 10 (32/64-bit) and Mac OS X 10.15 operating
systems
•Supports most All-In-One multi-function printers and regular USB printers
•Share multi-function printers and regular USB printers over the network
•Supports LPR/LPD printing protocols
•Control Center utility includes built in scan feature**
•Supports NetUSB technology**
•Share USB peripheral devices over the network including; digital cameras, web cams,
speakers, iPods™, flash drives, external hard drives, printers, and memory card
readers**
•Universal Plug & Play (UPnP) installation
•Diagnostic LEDs
6
Product Hardware Features
Front view
Power
This LED indicator is solid green when your router is powered on. Otherwise if this LED
indicator is off, there is no power to your router.
Link
This LED indicators will be light on green while data is transmitted or received through
your router LAN port. Be light on orange while unplugging the cable, the wireless
connection successful.
ACT
This LED indicator is blinking green when the wireless is “On” and functioning properly
with your . This LED indicator will be blinking green rapidly while data is transmitted or
received by your wireless clients or wireless network devices connected to your router.
USB1/ USB2
This LED indicator will be blinking
7
Side view
1) USB1 & USB2 Port
The USB 2.0 port allows you to connect USB printers and storage devices to your
network and share access to these devices to computers on your network through the
use of the included USB software utility.
2) LAN Port
This port allowes you to connect to the local network.
3) On/Off Power Switch
Move the On/Off switch to power “On” (Left position) or “Off” (Outer position) the
device. (ON/OFF)
4) WPS/ Init Button
Push and hold this button for 5 seconds to activate Wi-Fi Protected Setup (WPS) Push
Button Configuration (PBC) setup. Push and hold for 15 seconds to reset the device to its
factory default setting.
5) Power Port
Connect the included power adapter from your router power port and to an available
power outlet.
8
Application Diagram
1
USB hub
5
USB stick
2
Scanner
6
Printer
3
IP camera
7
Power adapter
4
External HDD
8
Router
The device server allows you to share your regular printer or multi-function printer
through a network. It is typically placed in the same location of your printer or multi-
function printer. Unlike many print servers the 2-Port USB 2.0 Wireless Multi-Functional
Network Server has the ability to communicate to your wireless network at data rates at
Wireless N speeds eliminating any wires throughout your household or office. In addition
to its print server functionality the wireless network server can also allow you to share
USB storage devices over the network.
9
UTILITY INSTALLATION
Windows Installation
1) Install USB Device Server Control Center. It is available in the DN-13024 USB Device
Server Product CD.
2) Click Install Utility
3) Follow the Install Shield Wizard instructions. Then click Finish.
4) Start USB Device Server Control Center and Auto-searching USB device server
window will appear.
5) The utility will automatically find the 2-Port USB 2.0 Wireless Multi-Functional
Network Server and your printer. When the 2-Port USB 2.0 Wireless Multi-Functional
Network Server is connected to your network.
10
CONNECTING THE DEVICE
1) Make sure that your USB devices are switched off and that the Server’s Power
Adapter is disconnected.
2) Connect the Server to the network with a twisted-pair category 5 cable, 10baseT,
100baseTX and /1000Base-T RJ-45.
a) If you have a DHCP server on your network, your Server will receive an IP
address automatically. The IP address will then appear on the Control Center or
on the page of configuration report that you printed earlier. If your DHCP server
does not give an IP address to the Server, the Server will use the automatic
private IP addressing IP: 169.254.0.0. ~ 169.254.255.255
b) If you are not working in a DHCP network, you need to manually set the Server’s
and PC IP address to IP: 169.254.0.0. ~ 169.254.255.255
IP Address
Unless you are assigning an IP address using DHCP, you must obtain an unused IP
address from your network administrator
Methods for Setting the IP Address
1) You can set the IP address of your Server using one of the following methods,
depending on your network operating environment:
a) Automatic IP Address Assignment
b) Manual IP Address Assignment
Connect the Power Adapter to the Server. The power indicator will light up and all light.
indicators will flash in turn. After the boot is completed, the LINK & POWER light will be
steady on and the ACT flashes.
Connect the USB devices to the USB1 and USB2 ports, turn on the USB devices and make
sure it is ready for use, the USB1 and USB2 Link indicator lights up.
Otros manuales para Digitus DN-13024
1
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Servidor de Assmann
