ASROCK AM2CPU Manual de usuario

AM2CPU Board SpecificationsAM2CPU Board Specifications

AM2CPU Board Specifications

It is not allowed to install DDR DIMMs into DDRII slots; otherwise,

this motherboard and DIMMs may be damaged.

Data Bus DIMM Configuration

DDRII_1 (Yellow) DDRII_2 (Yellow) DDRII_3 (Orange) DDRII_4 (Orange)

64 bit Single Side N/A Empty N/A

(single channel) Double Side N/A Empty N/A

Empty N/A Single Side N/A

Empty N/A Double Side N/A

Single Side N/A Single Side N/A

Single Side N/A Double Side N/A

Double Side N/A Single Side N/A

Double Side N/A Double Side N/A

128bit Single Side Single Side Empty Empty

(dual channel) Double Side Double Side Empty Empty

Empty Empty Single Side Single Side

Empty Empty Double Side Double Side

Single Side Single Side Single Side Single Side

Single Side Single Side Double Side Double Side

Double Side Double Side Single Side Single Side

Double Side Double Side Double Side Double Side

Platform: 7.8-in x 5.65-in (19.8 cm x 14.4 cm)

CPU: 940-Pin AM2 Socket Supporting AMD AthlonTM 64 / 64FX / 64X2 and

SempronTM Processors

Supports AMD’s Cool ‘n’ QuietTM Technology

FSB: Hyper Transport 1000 MHz

Memory: 4 x DDRII DIMM Slots: DDRII_1, DDRII_2, DDRII_3, and DDRII_4

Support DDRII800 / 667 / 533, Max. Total Memory Size 8GB

Dual Channel Memory Technology Support

NOTE

AM2CPU Board provides four 240-pin DDRII (Double Data Rate) DIMM slots, and supports Dual

Channel Memory Technology. For dual channel configuration, you always need to install identi-

cal (the same brand, speed, size and chip-type) DDRII DIMM pair in the slots of the same color.

In other words, you have to install identical DDRII DIMM pair in Dual Channel A (DDRII_1 and

DDRII_2; Yellow slots) or identical DDRII DIMM pair in Dual Channel B (DDRII_3 and DDRII_4;

Orange slots), so thatDual Channel Memory Technology can be activated. It also allows you to

install four DDRII DIMMs for dual channel configuration, and please install identical DDRII

DIMMs in all four slots. Please note that only theDRAM configuration according to the Allowed

DRAM Configurations Table below is workable. Do not make any DRAM configuration

that is not listed on the Allowed DRAM Configurations Table.

Allowed DRAM Configurations

AM2CPU Board LayoutAM2CPU Board Layout

AM2CPU Board Layout

1 2 x 240-pin DDRII DIMM Slots

(DDRII_3-4, Dual Channel B, Orange Slots)

2 2 x 240-pin DDRII DIMM Slots

(DDRII_1-2, Dual Channel A, Yellow Slots)

3 CPU Heatsink Retention Module

4 940-Pin AM2 CPU Socket

5 Golden Finger

6 CPU Fan Connector (CPU_FAN1)

7 ATX 12V Power Connector (ATX12V1)

AM2CPU Board InstallationAM2CPU Board Installation

AM2CPU Board Installation

To install AM2CPU Board into the Future CPU Port onASRock motherboards that support future

CPU upgrade function (e.g. K8Upgrade series motherboards), please follow the steps below.

STEP 1: Install the AMD 940-pin AM2 CPU into AM2CPU Board, then install the CPU fan and

heatsink into AM2CPU Board, and connect the CPU fan to the CPU fan connector

(CPU_FAN1).

NOTE: Though AM2CPU Board provides 4-Pin CPU fan (Quiet Fan) support, the 3-Pin CPU fan still can work

successfully even without the fan speed control function. If you use a 4-Pin CPU fan on AM2CPU

Board, the fan speed control function needs to depend on the motherboard support.

STEP 2: Install DRAM into AM2CPU Board.

STEP 3: If necessary, remove the CPU heatsink retention module from the ASRock motherboard

that you are going to install AM2CPU Board into.

NOTE: Whether or not to remove the CPU heatsink retention module from the ASRock motherboard depends

on the type of CPU fan installed on AM2CPU Board.

STEP 3-1: Place the ASRock motherboard with its backside up.

STEP 3-2: Use a flathead screwdriver to press down the WHITE fastener of the CPU

heatsink retention module through the hole. Repeat with remaining fasteners.

STEP 3-3: Use a pair of pliers to clutch the BLACK supporting part of the CPU heatsink

retention module, then press it down through the hole. Repeat with remaining

supporting parts.

STEP 3-4: Place the ASRock motherboard with its backside down, then remove the

loosened CPU heatsink retention module from the motherboard.

STEP 4: Adjust the jumper settings on ASRock motherboard to fit with the requirement for AMD

940-pin AM2 CPU installation. (See ASRock Motherboard User Manual for details).

STEP 5: Secure ASRock motherboard to the chassis.

STEP 6: Install AM2CPU Board into the Future CPU Port (a yellow slot) on ASRock motherboards

that support future CPU upgrade function by aligning the golden finger of AM2CPU

Board with the Future CPU Port.

NOTE: If you install AM2CPU Board and plan to install the AGP VGA card / PCI Express VGA card to the AGP

slot / PCI Express slot nearby Future CPU Port, please do not choose the VGA card with the heatsink

which is too thick to collide with AM2CPU Board. Otherwise, it may cause permanent damage to both

your AM2CPU Board and VGA card!

STEP 7: Secure AM2CPU Board with the bracket to the chassis.

STEP 8: Ensure to connect the power supply withATX 12V plug to theATX 12V Power Connector

(ATX12V1) on AM2CPU Board. Failing to do so will cause power up failure.

STEP3-1 STEP3-2 STEP3-3

STEP3-4

Please download the latest BIOS version of your motherboard from

our website and install it to your system; otherwise, your motherboard

may not support AM2CPU Board upgrade function. For the latest

BIOS version, please visit our website for installation:

http://www.asrock.com

3-PinFanInstallation 4-PinFanInstallation

Pin1-3 Connected

Tabla de contenidos

Otros manuales de Placa madre de ASROCK

ASROCK

ASROCK CML-HDV/M.2 TPM Manual de usuario

ASROCK

ASROCK H61 Pro BTC Manual de usuario

ASROCK

ASROCK G31M-GS Manual de usuario

ASROCK

ASROCK 775Twins-HDTV Manual de usuario

ASROCK

ASROCK AM2NF3-VSTA Manual de usuario

ASROCK

ASROCK H510M-H2/M2 SE Manual de usuario

ASROCK

ASROCK A520M-HVS Manual de usuario

ASROCK

ASROCK IMB-A160 Manual de servicio

ASROCK

ASROCK X99 Extreme6/ac Manual de usuario

ASROCK

ASROCK P45DE - V1.0 Manual de usuario

ASROCK

ASROCK J3160B-ITX Manual de usuario

ASROCK

ASROCK H77M-ITX Manual de usuario

ASROCK

ASROCK FM2A75 Pro4 Manual de usuario

ASROCK

ASROCK G31M-VS2 - V1.1 Manual de usuario

ASROCK

ASROCK Z68 EXTREME4 - ANNEXE 541 Manual de usuario

ASROCK

ASROCK E35LM1 Manual de usuario

ASROCK

ASROCK A770CROSSFIRE Manual de usuario

ASROCK

ASROCK H61M-DP3 Manual de usuario

ASROCK

ASROCK 760GM-GS3 Manual de usuario

ASROCK

ASROCK H55ICAFE Manual de usuario

ASROCK

ASROCK P4VM800Pro-DDR2 Manual de usuario

ASROCK

ASROCK Z97 Extreme3 Manual de usuario

ASROCK

ASROCK X370 GAMING Manual de usuario

ASROCK

ASROCK UTX-110 Manual de servicio

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manual de usuario