ASROCK NUC BOX 6100 Manual de usuario
NUC BOX
6100
User Manual
Version 1.0
Published December 2016
Important Safety Instructions
Pay close attention to the following safety instructions before performing any of
the operation. Basic safety precautions should be followed to protect yourself from
harm and the product from damage:
• Operation of the product should be carried out by suitably trained, qualied, and
certied personnel only to avoid risk of injury from electrical shock or energy hazard.
• Disconnect the power cord from the wall outlet when installing or removing main
system components, such as the motherboard and power supply unit.
• Place the system on a stable and at surface.
• Use extreme caution when working with high-voltage components.
• When handling parts, use a grounded wrist strap designed to prevent static discharge.
• Keep the area around the system clean and clutter-free.
• Keep all components and printed circuit boards (PCBs) in their antistatic bags when
not in use.
• Handle a board by its edges only; do not touch its components, peripheral chips,
memory modules or contacts.
e terms HDMI™ and HDMI High-Denition Multimedia Interface, and the HDMI
logo are trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.
Contents
Chapter 1 Introduction 1
1.1 Package Contents 1
1.2 Product Specications 2
Chapter 2 Product Overview 4
2.1 Front View 4
2.2 Rear View 5
2.3 Inside View 6
Chapter 3 Hardware Installation 7
3.1 How to Remove the Bottom Case 7
3.2 How to Remove the M.2 WiFi Module (Optional) 8
3.3 How to Install the mSATA SSD 9
3.4 How to Install the 2.5-inch Hard Drive 10
3.5 How to Install the Memory Modules
(DDR3 Low Voltage (1.35V)) 12
3.6 How to Install the VESA Bracket 13
3.7 Positions of the NUC BOX 6100 14
Chapter 4 Software and Utilities Operation 15
4.1 Installing Drivers 15
Chapter 5 UEFI SETUP UTILITY 16
5.1 Introduction 16
5.1.1 UEFI Menu Bar 16
5.1.2 Navigation Keys 17
5.2 Main Screen 18
5.3 Advanced Screen 19
5.3.1 CPU Conguration 20
5.3.2 Chipset Conguration 21
5.3.3 Storage Conguration 23
5.3.4 Super IO Conguration 24
5.3.5 ACPI Conguration 25
5.3.6 USB Conguration 27
5.3.7 Platform Trust Technology 28
5.4 Hardware Health Event Monitoring Screen 29
5.5 Security Screen 30
5.6 Boot Screen 31
5.7 Exit Screen 34
NUC BOX 6100
PB 1
English
Chapter 1 Introduction
1.1 Package Contents
• NUC BOX 6100 Barebone System with:
NUC BOX 6100 Chassis
Motherboard (pre-installed)
M.2 WiFi Module (Optional)
*e barebone system does not include memory, hard drive and mSATA SSD.
• Power Adapter (36W/12V) & Power Plug
• SATA Data and Power Cable
• mSATA Screw
• VESA Mount Bracket & Screw Package
• Support CD
• Quick Installation Guide
Because the hardware specications might be updated, the content of this documentation
will be subject to change without notice.
If any items are missing or appear damaged, contact your authorized dealer.
NUC BOX 6100
PB 2
English
1.2 Product Specications
NUC BOX 6100 Barebone
CPU Intel® 6th Gen Core U Processor (Core i3-6100U)
OS Windows®7 64-bit & 10 64-bit
Chipset By CPU
Memory 2 x DDR4 2133 MHz SO-DIMM up to 32G
Graphic Intel® HD Graphics 520
LAN 1 x Intel i219V (non vPro)
Front I/O 1 x USB 3.0, 1 x USB 3.1 (Type C), 1 x Audio-out with MIC-In
Rear I/O 2 x HDMI, 1 x DP, 2 x USB 3.0, 1 x LAN, 1 x Kensington lock, 1
x DC Jack
Expansion 1 x M.2 for Wi-Fi , 1 x M.2 for SSD
Power
Adaptor 19V / 65W
Dimension 110mm (W) x 46mm (H) x 118.5mm (L)
VESA Bracket included , supports 75 x 75 and 100 x 100 mm
Volume
(Liters) 0.6L
3 4
English
Audio Realtek ALC283
Front I/O 1 x USB 3.0, 1 x USB 3.0 (Type C), 1 x Audio-out with MIC-In
Operating
Tempera-
ture
0°C~50°C
Certica-
tions CE , FCC Class A
* For NUC BOX 6100 series, it is not recommended to install 2.5” HDD. If you install the 2.5” HDD, please keep the
NUC BOX in a vertical position to ensure better cooling performance.
NUC BOX 6100
3 4
English
Chapter 2 Product Overview
is chapter provides diagrams showing the location of important components of
the NUC BOX 6100.
2.1 Front View
No. Description
1Headphone & Microphone
2 USB 3.0 (Type A)
3 USB 3.1 (Type C)
4 IR Sensor Window
1 2 3
5 6
English
2.2 Rear View
No. Description
1DC-In
2HDMI
3RJ-45
4 Kensington Lock Slot
5 USB 3.0 (Type A)
6*DisplayPort
*To use DisplayPort as a display output, please connect your monitor/display to
HDMI Port when installing OS system.
is DisplayPort only supports DP to D-Sub dongle and does not support DP to
HDMI dongle and DP to DVI dongle.
* ere are two LEDs on the LAN port. Please refer to the table below for the LAN port LED indications.
Activity / Link LED Speed LED
Status Description Status Description
O No Link O 10Mbps connection
Blinking Data Activity Orange 100Mbps connection
On Link Green 1Gbps connection
ACT/LINK LED
SPEED LED
LAN Port
1 2 33 2 4
56
Este manual sirve para los siguientes modelos
3
Tabla de contenidos
Otros manuales de De oficina de ASROCK
ASROCK
ASROCK iBOX 1200 Series Manual de usuario
ASROCK
ASROCK M8 Manual de usuario
ASROCK
ASROCK CoreHT Manual de usuario
ASROCK
ASROCK NUC BOX 3150 Manual de usuario
ASROCK
ASROCK NAS-9601 Manual de usuario
ASROCK
ASROCK DeskMini GTX1060 Manual de usuario
ASROCK
ASROCK Jupiter-H110 Manual de usuario
ASROCK
ASROCK Jupiter H410 Manual de usuario
ASROCK
ASROCK Mars ADL Series Manual de usuario
ASROCK
ASROCK iEPF-7001 Manual de usuario
ASROCK
ASROCK NUC BOX-1135G7 Manual de usuario
ASROCK
ASROCK Mini Series Manual de usuario
ASROCK
ASROCK iBOX-220 Manual de usuario
ASROCK
ASROCK ION 3D SERIES Manual de usuario
ASROCK
ASROCK NETTOP S330 SERIES - Manual de usuario
ASROCK
ASROCK 4X4 BOX-4300U Series Manual de usuario
ASROCK
ASROCK ET TOP ION 330 SERIES - Manual de usuario
ASROCK
ASROCK iBOX-280 Manual de usuario
ASROCK
ASROCK iBOX-420-DL Manual de usuario
ASROCK
ASROCK iBOX-210 Manual de usuario
