asmodus LUSTRO 200W Manual de usuario
ASMODUS
LUSTRO 200W
www.asmodus.com
ASMODUS
13
20
27
34
48
55
62
41
07
LUSTRO 200W
Technical Parameters:
Safety Protections:
01
1. Turn on
Place batteries in the device, and quickly press the
"
FIRE
"
button 5 times to turn on the device.The screen will
display
"
ASMODUS
"
, and enter into working mode.
2.Mode selection
In the unlocking state, sliding left and right mode display position or gesture swipe left and right to cycle select
the operating mode (POWER, TEMP, CURVE, TCR, TFR).
3.Working parameter setting
POWER mode:
Power settings: In the screen unlocking state, in the power setting interface, press the "^"
and "v" icon to set the power value, press the "Fire" key to confirm and exit.
Taste setting: In the screen unlocking state, sliding up and down the touch screen or gesture
to swipe up and down to select the taste (soft (S), standard (N), violent (H)).
POWER mode dial display type: In the screen unlocking state, click the dial position to
switch the number of seconds and the power.
TEMP mode:
Coil material selection: In the screen unlocking state, long press the "TEMP" mode to enter the coil material selection interface press
"^" and "v" to select the coil material and press "Fire" to confirm and exit.
Temperature control power, temperature display switch: Click the power display position, can switch to the temperature display,
click the temperature display position, can switch to the power display.
Temperature control power setting: In the screen unlocking state, long press power display position to enter the setting interface,
press the "^" and "v" icons to set the power value directly in the power setting interface, press the "Fire" key to confirm and exit.
Temperature setting: In the screen unlocking state, long press the temperature display position, enter the temperature setting
interface, in the temperature setting interface directly press "^", "v" icon set temperature value, press "Fire" key to confirm and exit.
TEMP mode dial display type: In the screen unlocking state, click the dial position to switch the temperature and power.
CURVE mode:
View power points: In the screen unlocking state, sliding up and down screen or gesture up and down sliding cycle can be seen
P1 ~ P5 power value or time value.
Power value, time display switching: Click the power display position to switch to the time display, click the time display position,
can switch to the power display.
Power value setting: In the screen unlocking state, long press the power/time display position to enter the parameter settings
interface, in the parameter settings interface directly click on the left to modify the parameters, Press "^","v" icon to set the power
value, press the "Fire" Key to confirm and exit.
Using Your Device:
02
Time value setting: In the screen unlocking state, long press the power display position to
enter the parameter settings interface, in the parameter settings interface directly click on the
right to modify the parameters, Press "^", "v" icon to set the power value, press the "Fire "Key
to confirm and exit.
TCR mode:
TCR selection: In the screen unlocking state, sliding up and down screen or gesture up and
down sliding cycle can choose M1 ~ M5.
Temperature control power setting, temperature setting reference "TEMP" mode.
TCR value setting: In the screen unlocking state, long press "TCR" display position to enter the "TCR" setting
interface, sliding left and right to select editing number, Press the "^", "v" icon to set the value, press the "Fire" Key
to confirm and exit."TCR" mode dial display type setting reference "TEMP" mode.
TFR mode:
TFR selection: In the screen unlocking state, sliding up and down screen or gesture up and down sliding cycle can
choose M1 ~ M5.
Temperature control power setting, temperature setting reference "TEMP" mode.
TFR value setting: In the screen unlocking state, long press "TFR" display position to enter the "TFR" setting
interface, sliding up and down to select editing temperature point, sliding left and right to select editing number, Press the "^", "v" icon
to set the value, press the "Fire"Key to confirm and exit.
"TFR" mode dial display type setting reference "TEMP" mode.
4.System settings
In the work mode quickly press the “Fire” button 5 times to enter the system settings interface. In the system settings interface, left and
right sliding screen or gesture left and right slide can be selected to set the settings (shutdown, the number of mouth settings, the
number of clear, dial pointer style settings, upgrade, view version, cigarette light speed settings, vape switch settings, vaping light
color settings, touch screen lock mode settings, resistance detection).
Shutdown: Select the “shutdown” item, long press the icon location to shutdown.
Number of mouth settings: Select the "number of mouth settings" item, click on the icon position into
the mouth number settings interface, click "^", "v" icon can set the number of mouth limit; Press "Fire" to
confirm and return to the parent interface.
Number of ports clearing: Select the "Number of ports clearing" item, click the icon position to enter
the number of mouth clear interface, click the clear icon to clear the number of ports. Press the “Fire”
key to exit and return to the parent interface.
Upgrade: Select the “Upgrade” item, click the icon position to enter the upgrade confirmation interface, click the "YES" icon in the
upgrade confirmation interface,
03
04
press and hold the "Fire" button until the screen displays "Download Mode".
Dial pointer style setting: Select the "pointer" item, click the icon position to enter
the pointer style settings interface, click "^", "v" icon to set the pointer rotation style
(REAL, FUN); Press “Fire” to confirm and return to the parent interface.
View version: Select the "version" item, click the icon location to view the system
version; Press the "Fire" button again to return to the parent interface.
Vaping light speed setting: Select "vape speed", click the icon position to enter
the speed setting interface, click "^", "v" icon can choose "fast", "medium", "slow"
three kinds of speed; Press “Fire” to confirm and return to the parent interface.
Vaping light switch settings: Select the "vape light switch" item, click on the icon
position to enter the cigarette lighter switch settings interface, click "^", "v" icon to set the
vaping light "open", "off "; Press "Fire" to confirm and return to the parent interface.
Vaping light color settings: Select the "vape light color", click the icon position to enter
the vaping light color settings interface, click "^", "v" icon to set the color of the vaping light,
"red", "green", "blue" three colors; Press “Fire” to confirm and return to the parent interface.
Touch screen lock mode settings: Select the "lock icon" item, click the icon position to enter
the touch screen lock mode settings interface, click "^", "v" iconcan choose "Slide",
"Click"; Press "Fire" to confirm and return to the parent interface.
Off display time setting: Select "Off display time setting" item, click the icon and
enter into the off display setting interface, click “^”、“v” to set the time; click the “Fire”
key to confirm it and return to the former interface.
Resistance detection: In the booting state, quickly press the “Fire” button 5 times to
enter the settings interface, left and right sliding screen to select the resistance test
interface, click on the icon that test resistance value (Note: In the temperature control
mode, please confirm the resistance value is cold resistance, which is the premise of
the normal work of the equipment!), Click “ADJ” to modify the resistance value. Press “FIRE” to confirm
the resistance and exit.
5.Lock and unlock
Touch screen unlock: In the touch screen locking state, sliding in the direction of the arrow on the touch
screen to unlock.
Touch screen lock: In the working state, press the "Fire" key to lock.
System lock: In the working mode, fast press the "Fire" button 3 times to lock.
System Unlock: In the system locking state, fast press the “Fire” button 3 times to unlock.
05
Tips:
6.flashlight
In the locking screen state, on the touch screen in the direction of the arrow (from bottom to top) slide into the
settings interface, click the flashlight icon into the flashlight function.
7.Gesture switch
In the locking screen state, on the touch screen in the direction of the arrow (from bottom to top) slide into the
settings interface, press the "^" and "v" icon to set the gesture "on" "off ". Press "Fire" to confirm and return to the
main interface.
8.Anti-ignition function
The local ignition requires the human body finger to fully touch the ignition key to ignite the cigarette, to
prevent the user from forgetting to shut down or lock the system and accidentally ignite (such as putting in the
bag with the false trigger, put in the suitcase with the false trigger, etc.).
9.System Upgrade
1.The device enters the upgrade mode "Download Mode".
2.Connect the device to a computer via a USB cable.
3.Open the computer side of the upgrade software, click the “Connect” button, the left side of the button
turns gray to green, indicating that the device and upgrade software connection is successful.
4.Click the "File" button, select the firmware to be upgraded (such as: xxx.firmware).
5.Click the "Upgrade" button to upgrade.
6.After the upgrade is successful, the device prompts "Upgrade Ok".
7.Power off and rebooting.
☆
10. Battery handling method
☆
1. The negative pole of the battery is against the
negative pole of the machine。
2. Push the battery to the negative direction, and
then remove the battery.
1. Warning when atomizer resistance is too high:
"
HIGH ATOMIZER
"
2. Warning when atomizer resistance is too low:
"
LOW ATOMIZER
"
3. Warning when atomizer resistance is removed:
"
ATOMIZER REMOVE
"
4. Warning when no atomizer is connected:
"
CHECK ATOMIZER
"
5. Warning when atomizer gets short circuit:
"
ATOMIZER SHORT
"
6. Warning when battery voltage is too high:
"
HIGH BATTERY
"
7. Warning when battery voltage is too low:
"
LOW BATTERY
"
8. Warning when fire working time exceeds 10S:
"
WORK OVERTIME
"
9. Display when device turns on:
"
ASMODUS
"
10. Display when device turns off:
"
SYSTEM OFF
"
TYPE-C
Charging port
Fire Button
Output Wattage
Status Indication
LED
Gesture Switch
Status
Lock
Puff Limit
Battery
Door
Decorative
Strips
Gesture
Induction
Battery Level
Mode
Output Voltage
Dash Board
Atomizer
Resisitance
06
Machine
bottom
* Always recommended to use external charger if available.
Asmodus LUSTRO 200W TC is an ELECTRONIC NICOTINE DELIVERY SYSTEM
(ENDS). It is not suitable for persons under legal vaping age, pregnant or nursing women,
persons at risk of heart disease, persons with hypertension and/or diabetes, or persons taking
medication for depression and/or asthma.
LEGAL DISCLAIMER: Underage sale of this product is prohibited. Depending on your
country/region, legal vaping age is 21+ and 18+ elsewhere.Keep out of reach of children.
Keep the contents of this package out of reach of children,non vapor and animals
This product contains nicotine which is a highly addictive substance.
CAUTION:This product is for adult use only.Store in a cool dry place.Only for use in electronic
cigarettes.Do not ingest or apply to skin.If nicotine poisoning occurs seek immediate medical
attention.
www.asmodus.com
参数特点：
● 芯片采用GX-200HUTC-V1.0
● 支持电池型号：18650型（2节18650高倍率平头电池）
● 输出功率范围 (功率模式)：5.0 Watts-200.0 Watts
● 输出功率范围（温控模式）：5.0 Watts-120.0 Watts
● 发热丝阻值范围：0.1 Ω-3.0 Ω
● 温度限制范围：212℉-572℉/100℃-300℃
● 支持高清晰度彩色显示屏幕
● 支持TCR、TFR模式以及多种材质发热丝
● 支持CURVE(曲线)模式
● 支持手势功能
● 支持手电筒功能
● 支持防误点火功能
● 支持口数清零/限制功能
● 支持系统升级功能
● 支持快充功能(兼容QC 2.0)
● 充电参数：DC 5V/12V/2A
● 最高输出电压：8.4 Volts
● 最高输出电流：35.0 Amps
● 输入电压范围：6.4 Volts-8.4 Volts
● 显示屏工作电流：25mA
● 待机工作电流：<350uA
● 待机时间：18S
● 吸烟时间：10S
● 工作效率94%
安全功能设计：
● 电池反向保护 ● 电池过压保护
07
Tabla de contenidos
Idiomas:
Otros manuales de Vaporizador de asmodus
Manuales populares de Vaporizador de otras marcas
Storz & Bickel GMBH
Storz & Bickel GMBH Crafty Manual de usuario
Joyfect
Joyfect Freaky One Manual de usuario
SIGELEI
SIGELEI 213 FOG Manual de usuario
Eleaf
Eleaf Lemo 2 Manual de usuario
Vapor Brothers
Vapor Brothers VB Eleven Pen Manual de usuario
STORZ & BICKEL
STORZ & BICKEL VOLCANO CLASSIC Manual de usuario