asis ATCA Manual de usuario
Asis ATCA
Shelf Manager Board
User Manual
May 2014 Revision 1.2
Table of Contents
ATCA Shelf Manager Board ii Revision 1.2
Asis, the ATCA experts
Table of Contents
TABLE OF CONTENTS ................................................................................. II
TABLE OF FIGURES ................................................................................... III
LEGAL NOTICE AND WARRAENTY ..............................................................IV
CONTACT INFORMATION ............................................................................ V
SAFETY INSTRUCTIONS.............................................................................VI
REVISION HISTORY................................................................................. VII
ABOUT THIS DOCUMENT.........................................................................VIII
1INTRODUCTION .............................................................................. 10
1.1 SHELF MANAGER BOARD ........................................................................... 10
1.1.1 Features ...................................................................................... 12
1.1.2 Front Panel................................................................................... 13
2UNDERSTANDING THE BOARD COMPONENTS ................................. 14
2.1 VISUAL INDICATORS................................................................................ 14
2.2 EXTERNAL CONNECTIONS .......................................................................... 16
2.2.1 Telco Alarm Connector................................................................... 16
2.2.2 Serial RS232 (Console) Connector................................................... 17
2.2.3 Ethernet Connector ....................................................................... 17
2.3 JUMPERS ............................................................................................. 18
3REPLACING THE CARD AND COMPONENTS ..................................... 19
3.1 INSERTING THE SHELF MANAGER CARD ......................................................... 19
3.2 SHELF MANAGER BOARD BATTERY REPLACEMENT .............................................. 19
4SOFTWARE COMMANDS .................................................................. 21
4.1 GENERAL ............................................................................................. 21
4.2 CONSOLE CONNECTION ............................................................................ 21
4.3 MANAGEMENT COMMANDS......................................................................... 23
5ASIS ATCA SHELF ACRONYMS......................................................... 25
Table of Figures
ATCA Shelf Manager Board iii Revision 1.2
Asis, the ATCA experts
Table of Figures
FIGURE 1-BLOCK DIAGRAM OF SHELF MANAGER BOARD .................................................... 11
FIGURE 2–BOARD LAYOUT ....................................................................................... 12
FIGURE 3–FRONT PANEL ......................................................................................... 13
FIGURE 4–LED'S ON THE SHELF MANAGER BOARD FRONT PANEL .......................................... 14
FIGURE 5–SHELF INTERCONNECT ............................................................................... 18
FIGURE 6–SHELF MANAGER BOARD INSERTION ............................................................... 19
FIGURE 7-THE HYPERTERMINAL SCREEN ....................................................................... 22
FIGURE 8-SERIAL PORT CONFIGURATION SCREEN............................................................ 22
Legal Notice and Warraenty
ATCA Shelf Manager Board iv Revision 1.2
Asis, the ATCA experts
Legal Notice and Warraenty
Information in this document is provided in connection with Asis products. no license,
express or implied, by estoppel or otherwise, to any intellectual property rights is granted
by this document. except as provided in Asis terms and conditions of sale for such
products, Asis assumes no liability whatsoever, and Asis disclaims any expressed or
implied warranty, relating to sale and/or use of asis products including liability or
warranties relating to fitness for a particular purpose, merchant ability, or infringement of
any patent, copyright or other intellectual property right.
Asis warranty will be for the quality of the Asis ATCA Shelf Manager Board for a period of
one year after the shipment of the product.
Asis may make changes to specifications and product descriptions at any time, without
notice.
ASIS © Ltd. 2007
Contact Information
ATCA Shelf Manager Board vRevision 1.2
Asis, the ATCA experts
Contact Information
In order to retrieve further information about any of Asis products either described in this
document and/or related systems and/or components, please contact an ASIS
representative at:
Israel Headquarters
27 Shaked St.
Industrial Park - Hevel Modi’in,
6085102 Israel
Telephone: +972-73-233-6600
See the ASIS web site at http://www.asis-pro.com
Safety Instructions
ATCA Shelf Manager Board vi Revision 1.2
Asis, the ATCA experts
Safety Instructions
This symbol indicates potential safety hazards regarding product operation or
maintenance to operator or service personnel.
General Safety Practices
Before handling the board, read the instructions and safety guidelines on the following
pages to prevent damage to the product and to ensure your own personal safety.
Always use caution when handling/operating the board. Only qualified,
experienced, authorized electronics service personnel should access the
interior of the equipment.
Always follow the procedural instructions for component removal and
replacement in sequence.
Working with Lithium Batteries
Your Shelf manager board may have a non-rechargeable lithium battery.
Do not short circuit
Do not heat or incinerate
Do not charge
Do not deform or disassemble
Do not apply solder directly
Do not mix different types or partially-used batteries together
Always observe proper polarities.
Revision History
ATCA Shelf Manager Board vii Revision 1.2
Asis, the ATCA experts
Revision History
Number
Date
Comments
Author
1.0.1
Sep 2007
Initial release
Yossi Kuzi
1.0.2
Dec 2008
Addition of the battery isolation film removal
Ilan Bar
1.2
May 2014
Front panel LEDs and push-buttons
Boaz Bar-Ilan
About this Document
ATCA Shelf Manager Board viii Revision 1.2
Asis, the ATCA experts
About this Document
This document provides technical information for the Asis Perform 14 slots Shelf
Manager board.
It is intended for technical staff tasked with installing, setting up and configuring the
system, and providing troubleshooting assistance and servicing.
Related Documents
Instructions relating to software installation and documentation for application software
development for this platform are available in the Shelf Manager External Interface Reference
Manual provided by peigon point to Asis.
Instructions relating to software installation and documentation for application software
development for this platform are available in the Shelf Manager External Interface
Reference Manual.
For Asis product information and additional resources, please visit the Asis website at
www.asis-pro.com.
Downloads (manuals, release notes, software, etc.) are available via the Technical
Support Library product links at www.asis-pro.com (for registered customers).
Information about PICMG (PCI Industrial Computer Manufacturers Group) and the ATCA
standard may be accessed on the PICMG Web site at www.picmg.com.
Chapters and Their Contents
1
Introduction
General overview of the product family and the board.
Pg. 10
2
Understanding the Board
Components
the functional features and components of the board
Pg. 14
3
Software Commands
this chapter contains the software commands needed
to manage the shelf
Pg. 21
About this Document
ATCA Shelf Manager Board ix Revision 1.2
Asis, the ATCA experts
Style Conventions
Verdana
Regular text.
Arial Bold
Commands, keys and other parts of the user interface.
Arial Italics
Names of classes, methods, arguments, exceptions, properties, etc.
Also used for special terms, the first time they appear.
Monospace
Text displayed on the LCD or on a computer attached to the product.
Notes, which offer an additional explanation or a hint on how to
overcome a common problem.
Warnings, which indicate potential safety hazards regarding product
operation or maintenance to operator or service personnel.
Introduction
Shelf manager Board
ATCA Shelf Manager Board 10 Revision 1.2
Asis, the ATCA experts
1 Introduction
1.1 Shelf manager Board
The ASIS ATCA shelf is designed to comply with all relevant ATCA specifications, including
the IPMI 1.5 (Intelligent Platform Management Interface) specifications.
The Shelf Manager monitors the shelf temperature sensors, collecting status information,
generate alarms, control the indication displays and the fan trays.
It's of remote control capable. It supports multiple management interfaces, including:
RMCP, RPC, SNMP, CLI and Web Interface.
Tabla de contenidos
Manuales populares de Placa madre de otras marcas
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manual de usuario
Gigabyte
Gigabyte GA-9IVDT Manual de usuario
Texas Instruments
Texas Instruments ADS8372EVM Manual de usuario
Commell
Commell MS-C73 Manual de usuario
IBT Technologies
IBT Technologies MB860 Manual de usuario
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manual de usuario
