Ashly MQX-2150 Guía de inicio rápido

MQX-2150

The graphic equalizer shall be stereo (2 channels). Each

channel shall consist of 15 bands centered on standard

ISO frequencies at intervals of 2/3 octave and covering

a frequency range of 25Hz to 16kHz. Individual bands

shall be activated by linear slide faders with a 25mm

travel, and a tactile center detent. The range of equaliza-

tion per band shall be switchable between ±15dB or

±6dB.

The equalizer shall have a gain of unity with all sliders

centered, and shall have a maximum in/out level of

+23dBu. Frequency response shall be ±.25dB 20Hz to

20kHz. Hum and noise shall be at least -96dBu and

SMPTE intermodulation distortion or THD shall be

less than 0.01% at +20dBu. Input impedance shall be

20k ohm balanced, 10k ohm unbalanced. Output

impedance shall be 200 ohm balanced, 100 ohm unbal-

anced. Inputs and outputs shall be active (tranformer-

less) balanced type on both XLR and 1/4 phone jacks.

Individual filters shall be Wein-bridge type and con-

nected in a summing circuit optimized for minimum

filter interaction and constant bandwidth at any slider

setting. Boost and cut characteristics shall be fully sym-

metrical, with the filter being electrically removed from

the circuit in the center (flat) position. Individual filters

shall be accurate to within 3% of indicated center fre-

quency and shall be non-adjustable to insure long term

accuracy.

The equalizer shall also include an 18dB per octave

high pass filter at 20Hz, internally selectable. A green

signal presence and red clip indicators shall show criti-

cal operating levels. Input gain shall be adjustable over

minus infinity to +6dB, and an overall EQ bypass

switch shall be included. The equalizer shall weigh 6.5

lbs net and mount in a standard 19 rack using 1 space

(1.75 high). The power requirement shall be 90-

125VAC, 50-60Hz, 10W. The unit shall be an Ashly

Audio MQX-2150.

TECHNICAL NOTES & SPECIFICATIONS

ARCHITECTS SPECIFICATIONS

MQX-2150 Miniature 15-Band Graphic Equalizer

Features:

 Constant "Q" design for low

ripple and minimum interac-

tion

Precision Wein Bridge Filters

Balanced XLRs & 1/4 TRS

Jacks on Inputs and Outputs

Selectable 15dB or 6dB Range

18dB/Octave High Pass Filter

Low Noise Design

Silent In/Out Switching

Signal Present and Clip LEDs

25mm Fader with Center-Off

Position

5-Year Worry-Free Warranty

Ashly Audio Inc., 847 Holt Road, Webster, NY 14580-9103, Toll Free (800) 828-6308, Telephone (585) 872-0010, FAX (585) 872-0739

Internet: http://www.ashly.com, email: [email protected]

Ashly manufactures a complete and comprehensive line of Graphic and Parametric Equalizers,

Electronic Crossovers, Power Amplifiers, Compressor-Limiters, Mixers, and

Amplifier Input Options. Please call, write or visit our web site for information on any of these Ashly Products.

Applications:

Churches, Studios, Concerts, Dance/Night Clubs, PA Systems, Auditoriums, Lecture Halls, Sports Stadiums, Outdoor Festivals

General Specifications MQX-2150

INPUT TYPE: Active Balanced

INPUT IMPEDANCE: 20K ohm Balanced, 10k ohm

Unbalanced

MAX. INPUT LEVEL: +23dBu

OUTPUT TYPE: Pseudo-Balanced*

OUTPUT IMPEDANCE: 200 ohm Balanced, 100 ohm

Unbalanced

MAX. OUTPUT LEVEL: +23dBu

CONNECTORS: 1/4 Phone jack and XLR

FREQUENCY RESPONSE: ± .25dB

TOTAL HARMONIC DISTORTION: < .01% @ +20dBu

IM DISTORTION (SMPTE): < .01% @ +20dBu

OUTPUT HUM AND NOISE: < -96dBu (20Hz-20kHz unweighted)

CROSSTALK: < -90dB, 20Hz-20kHz

FILTER TYPE: Constant Q/Wein Bridge

BANDWIDTH: 2/3 octave

TOLERANCE: ±3%

RANGE: ±6 or ±15 dB

SUBSONIC FILTER: 18dB/octave @ 20Hz (internally

switchable)

POWER REQUIREMENTS:

Nominal Voltage: 90-125VAC, 50-60Hz,

(240VAC available)

Minimum Voltage: 90VAC

Power: 10W

SHIPPING WEIGHT: 8 lbs

DIMENSIONS: 19L x 1.75H x 6D

Rear Panel MQX-2150

*Pseudo-balanced output is single ended signal with balanced impedance

Otros manuales para MQX-2150

Otros manuales de Equipo de grabación de Ashly

Ashly

Ashly 2.24GS Guía de inicio rápido

Ashly

Ashly MQX-2310 Guía de inicio rápido

Ashly

Ashly GQX-3102 Guía de inicio rápido

Ashly

Ashly MQX-2150 Manual de usuario

Ashly

Ashly 2.24PS Guía de inicio rápido

Ashly

Ashly MQX-1310 Guía de inicio rápido

Ashly

Ashly GQX-1502 Guía de inicio rápido

Ashly

Ashly Graphic Equalizers GQ-131 Manual de usuario

Ashly

Ashly 2.24GS Manual de usuario

Ashly

Ashly MQX-2310 Manual de usuario

Ashly

Ashly SC33 Manual de usuario

Ashly

Ashly MQX-2150 Manual de usuario

Ashly

Ashly MQX-2310 Manual de usuario

Ashly

Ashly GQX-1502 Manual de usuario

Ashly

Ashly GQX-1502 Manual de usuario

Ashly

Ashly MQX-2150 Guía de inicio rápido

Ashly

Ashly DPX-100 Manual de usuario

Ashly

Ashly GQX-3102 Manual de usuario

Ashly

Ashly 4.24GS Guía de inicio rápido

Manuales populares de Equipo de grabación de otras marcas

KV2 Audio

KV2 Audio 500 Series Manual de usuario

Robotics Technologies

Robotics Technologies microBus-Cam II Manual de usuario

Seca

Seca 460 Manual de usuario

Cognex

Cognex MVS-8000 Series Manual de usuario

Mect

Mect MPNC006 Series Manual de usuario

Bad Caf

Bad Caf THE LEASH Manual de usuario

Strymon

Strymon NIGHTSKY Manual de usuario

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Manual de usuario

Tews Technologies

Tews Technologies TPMC465 Manual de usuario

Honeywell

Honeywell Excel 50 Manual de usuario

SeaLevel

SeaLevel COMM+8.LPCI Manual de usuario

Arturia

Arturia AUDIOFUSE STUDIO Manual de usuario

Rukra

Rukra RK-1240 Manual de usuario

Samson

Samson SCOM Manual de usuario

Dynacord

Dynacord DPS260 Manual de usuario

Nice

Nice Core Manual de usuario

Pyle Pro

Pyle Pro PSS8 Manual de usuario

RF-System

RF-System TinyGate Manual de uso y cuidado