ARTVZ AE20C-02 Manual de usuario
Thank you for purchasing AE20C-02 Follow and ride smart suitcase.
Please read this product manual carefully before use and follow all instructions,
cautions and warnings contained in this manual.
Failure to do so may result in product damage and will not be covered by the warranty.
Please keep the product manual in a safe place.
WeChat official public number
product list
一 Quick start --------------------------------------------------------------------------------------------------
二 Products and accessories ------------------------------------------------------------------------------
三 product manual -------------------------------------------------------------------------------------------
四 Meet ARTVZ smart follow suitcase --------------------------------------------------------------------
五 Product parameters -------------------------------------------------------------------------------------
六 TSA fingerprint lock setting instructions ------------------------------------------------------------
七 Remote control instructions ---------------------------------------------------------------------------
八 APP instructions ------------------------------------------------------------------------------------------
九 Precautions ------------------------------------------------------------------------------------------------
十 Legal Notice -----------------------------------------------------------------------------------------------
十一 After sales service --------------------------------------------------------------------------------------
1
2
3
4
5
6
8
10
13
14
15
1
Quick start
1
WeChat official public number WeChat Official subscription number APP scan code download
The first step. Scan code to pay attention to the official WeChat public number,
you can get the APP download link
Step 2. Download and install the app
Step 3. Open the front cover, install the battery, and start the smart suitcase.
Step 4. Open the app and match it with the phone to match（password 888888）
Step 5. After the match is successful, you can use the APP to control
1.Open the plastic front cover 2.Install battery 3.Press the On/Off button to turn it on,
Press and hold the On/Off button to
turn it off.
Step 6. After completing the match, proceed to control
APP can only perform riding control, can not control automatic follow,Batteries can be plugged in
front and back.
button
2
Products and accessories
2
When taking the battery, turn the cover to the vertical position to prevent the battery from
bouncing against the cover.
Follow and ride smart suitcase Power Adapter
battery
Remote control Instruction manual
跟随骑行智能行李箱
使用说明书
Follow and ride smart suitcase
User’s Manual
Charging Cable
3
Qroduct manual
3
Product Description: The lower side of the lever is the power of the love luggage smart phone,
the power can be removed as a charging treasure.
1) Start the machine: press the power switch, the power display screen lights up, it is turned on.
2) Turn off the machine: Press and hold the power switch, and the power display screen will be turned off.
3) USB charging port: Plug the charging device into the USB charging port through the charging cable, and
the power screen will light up, that is, power the device.
4)Charge the machine power; press the PUSH button on the right side of the power supply, the machine
power is ejected, and the power is removed. There is a DC5.5 charging interface on the side of the power
supply, and the charger can be connected.
5) Power Charger: When the power charger is connected to the power supply, the indicator light is red and
charging is in progress. When the indicator light is green (or blue), the battery is fully charged. (According to
the color of the charger indicator, the power display screen shows that the power is sometimes virtual)
Boot Shut down
99%
PUSH
Take the battery
4
1. Main box 2. ‘ARTVZ’Logo 3. Telescopic pedal 4. Fingerprint lock 5. USB charging port
6. Battery display screen 7. On/Off button
If the power supply is about 30%, the luggage may not work. This is normal. It is not a product
quality problem. About 30% of the power can be used as a USB output.
1
3
7
4
Understand ARTVZ smart follow suitcase
4
2
65
5
Luggage parameters:
Product parameters
5
Basic Information
Intelligent function
Battery specification
Motor specifications
size
weight
Volume
Box material
Box material
Quantity
power
Torque
Maximum speed
Smart follow
One-click riding
APP manipulation
Three-in-one fingerprint lock
Automatic recall
Lost reminder
Externally disassembled battery
Power display
capacity
weight
Charging voltage
Charging time
USB output
Power Output
recharge mileage
3180mAh/80.1Wh
480g
29.4V
3.5H
5V/2.1A
24V/6A
Riding 7 km, following 10 km
355X235X525mm
5.5KG
36L
Bayer PC
Fabric material
2
150W
2.0N·m
7Km/h
6
In the process of use, there is no battery, no lock can be unlocked, you can use the USB port
external power supply (charge treasure, etc.) emergency unlock
Fingerprint module Emergency power supply
Settings button
TSA fingerprint lock description
6
1)Fingerprint entry:
First touch the fingerprint module,Press the setting button (SET) on the back to enter the fingerprint
entry status. At this time, the LED blue light flashes quickly. Please press the finger fingerprint that
needs to be entered. Each time the fingerprint is successfully captured, the blue light will be
extinguished once and then continue to flash quickly. After the success, the green light is always on,
and the fingerprint is successfully entered. If the red light is on, it means that the fingerprint input
failed. You need to continue pressing the finger to be entered. After the fingerprint input error of the
same group is accumulated 4 times, the red light is on, indicating that the fingerprint has failed to be
entered, and the fingerprint needs to be restarted.
2)Fingerprint unlock:
Pressing the finger that has been successfully entered, the fingerprint is correct, and the blue light
flashes, the sound of the motor rotation will be heard. At this time, it is unlocked. After 10 seconds,
the motor will rotate and the lock will be locked automatically. If you press your finger and it flashes
red, it means that the fingerprint does not pass or the fingerprint is incorrect. You need to press the
finger that has entered the fingerprint again.
When shipped from the factory,any finger can be unlocked when the lock does not store fingerprints
3)Fingerprint delete：
Press and hold the setting button until the red light flashes and the light is on, the fingerprint is
deleted successfully.
LOCK
SET
(Not a charging port, used as an emergency
power supply when the battery is dead）
Note: The box body is made of German Bayer PC material, which belongs to the soft box series. In order to ensure smooth opening and
closing, do not put too much baggage. In order to prevent the box from opening, it is strictly forbidden to squeeze the box to lock the
fingerprint lock.
7
Smart lock lighting system:
TSA fingerprint lock description
6
colour
blue
blue
blue
blue
blue
red
green
red
Flashing frequency
Gradually brightening
After gradually getting darker, it flashes twice immediately
After flashing twice quickly, fade in and fade out once
Gradual lightening
Lighten up quickly
Gradually brighten and darken many times
Close after long light
Gradual lightening
status
Fingerprint status
Boot
Electronic lock unlock
Electronic lock normally closed
Shut down
Delete fingerprint
Fingerprint entry succeeded
Fingerprint recognition error
8
Remote control instructions
7
Remote control operation:
1） Remote control battery display: When the main button is pressed, the main button will flash, flashing
four times is about full power, flashing three times is about 75% of the power, flashing two times is
about 50% of the power, flashing about 25% of the power.
2）Follow mode: Start the trunk power switch and the remote control power switch, click on the puppy
pattern on the remote control to open the follow mode, the box will follow closely behind, please be
careful not to block the follower module on the trunk. The follow mode is not recommended in the case
of a large number of people. Short press the follow button to turn on the non-obstacle mode follow,
long press the follow button to start the obstacle avoidance mode follow.
Whether to open the obstacle avoidance division: follow the button flashing to avoid obstacle
avoidance, and the long light is to avoid obstacles.
Main button
Riding button
Remote control pairing:
Press the main button and the ride button at the same time, press and hold 1S until the buzzer emits a
drop, drop, .......... slow cycle sound, the LED of the ride button will flash at the same frequency, and the
main button The LED is long bright.
Then the user aligns the main button with the hole of the motor board. If the pairing is successful, the
buzzer will slam the drip 5 times, and the LED will flash 5 times, then return to normal. The buzzer in the
cabinet is also drastically dripping 5 times.
If it is not successful, then the drop of the remote control, the slow cycle will continue to ring, and the LED
will also strobe. The buzzer and LED are automatically turned off after 2 minutes. End the pairing.
The remote control has been paired successfully at the factory and does not need to be paired again:
Turn on the remote control, please wait until the main button flashes before proceeding.
follow ride
Main button
Tabla de contenidos
