ARTIST 22 Plus Manual de usuario
1
Artist 22 Plus Drawing Display
Product Overview
1. Display/Work Area
2. Pen Clip
3. Brightness Down
4. Brightness Up
5. Power Key
6. Power Indicator Light
a. Blue: When the drawing display is connected to the computer and the power supply is
switched on, the indicator will be on.
b. Orange: When the power supply of the drawing display is turned on, but no signal is
received from the computer.
c. Off: When the power supply of the drawing display is turned off.
7. Power Jack
8. USB-C Port
9. HDMI Port
10. Headphone Port
Package Includes
Drawing display
X3 Pro Smart Chip Stylus
Pen clip
Pen nibs
Nib removal tool
Power adapter and cable
2
HDMI cable
USB-C to USB-C cable
USB-C to USB-A cable
Cleaning cloth
Glove
Connecting the Product
1. HDMI Connection
Connect the drawing display to your computer's HDMI and USB ports using the HDMI and
"USB-C to USB-A" or "USB-C to USB-C" cables. Then connect the power cable to a power
outlet.
* The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States
and other countries.
2. USB-C Connection (for full-featured USB-C ports)
Connect the drawing display to your computer's USB-C port using the "USB-C to USB-C"
cable. Then connect the power cable to a power outlet.
3
Compatibility
Windows 7 or later
macOS 10.10 or later
Chrome OS 88 or later
Android（USB3.1 DP1.2）
Linux
Product Settings
Driver Installation
To ensure the device works properly, please install the driver before using.
Please download the driver suitable for your product model from XPPen website
(https://www.xp-pen.com).
Notes:
1. Before installing the driver, please turn off all antivirus software and graphics software.
2. Uninstall drivers (if any) for other drawing displays/tablets before the installation.
3. Restart your computer after the installation is completed.
4. For the best performance for your device, we recommend you install the latest driver.
Windows:
Unzip and run the "exe" file as administrator, follow the prompts to complete the installation.
Mac:
Unzip and run the "dmg" file, follow the prompts to complete the installation. Go to System
settings -> Privacy & Security -> Accessibility, ensure PenTable_ Driver is enabled.
4
If there is no PenTablet_Driver on the list, go to Library -> Application Support -> PenDriver to
add manually.
Linux:
Deb: Enter command sudo dpkg -i. Drag the installation file to the window and execute the
command;
Rpm: Enter command sudo rpm -i. Drag the installation file to the window and execute the
command;
Tag.gz: Unzip file. Enter command sudo. Drag install.sh to the window and execute command.
5
Introduction to Driver
If the device is not connected or the connection fails, you can see the following prompt. In this
case, try to restart your computer or the driver, or contact our service staff for support.
If the device is connected to your computer successfully, the device image and name will be
displayed in the upper left corner of the driver.
You can connect up to multiple devices via the driver at the same time. Customize a specific
device's settings after switching to that device, and all changes made will only apply to that
device.
6
Device Settings
You can set the drawing tablet functions, including:
1. Work Area
2. Pen Settings
Work Area
Go to Work Area and define the mapping between the device's work area and the screen
display area.
7
Screen
You can set the mapping between the display area of the monitor and the device.
If multiple monitors are used in copy mode, the work area of the device will be mapped to all
monitors. When the pen moves in the work area, the cursor on all monitors will move at the
same time.
If multiple monitors are used in extended mode, go to monitor tabs to select one of the
monitors that the work area of the device will be mapped to. The default mapping is XPPen
drawing display.
There are following options available to set the monitor mapping area:
1. Set full screen: The whole area of the selected monitor;
2. Customize screen area: Three ways;
8
1) Drag to select an area: Drag the cursor from one point to another within the red
area.
2) Use the cursor to select an area: Select "Click to set screen area", then click the
upper left corner position and lower right corner position to select on the screen.
3) Coordinates: Manually enter coordinates in the corresponding input boxes for X, Y, W
and H.
Identify:
Identify all connected monitors. The numeric identifier will be displayed in the lower left corner
of each monitor.
Calibration:
Hold the stylus in your usual way and click the center of the red cross on the monitor to
calibrate the offset between the stylus and the cursor.
Drawing Tablet
You can set the work area of current device here. The driver enables the following ways to set
the work area of the device:
9
1. Full area: The whole work area of the device.
2. Customize active area: Three ways;
1）Drag to select an area: Drag the cursor from one point to another within the red
area.
2）Use the pen to select an area: Select "Click to set active area", then use stylus to
click the upper left corner position and lower right corner position on your device.
10
3）Coordinates: Manually enter coordinates in the corresponding input boxes for X, Y, W
and H.
Proportion:
Scale your device's work area and selected display area proportionately.
For example: After selecting proportion, if you draw a circle on the device, a circle will appear
on the screen, but some part of the work area may not be used. But if you don’t choose the
proportion and draw a circle, then the circle may change into an ellipse on the screen.
Rotation:
You can set the device to 0°, 90°, 180° and 270° clockwise for use.
Left-handed mode: Rotate 180°.
Display settings:
Color temperature: The driver enables five modes, i.e., 5000K, 6500K (default), 7500K, 9300K,
and USER. In the USER mode, color temperature can be customized by adjusting the R, G
and B values.
Color space: The driver provides four modes: sRGB, Adobe RGB, DCI-P3, and USER. In
USER mode, you can customize the color space by adjusting the values of R, G, and B.
Tabla de contenidos
