ArtFox SparkX Manual de usuario
Professional LED PANELS, STAGE LIGHTING
Manufacturer.
Tel:
+1-(323)287-5559 +1-(323)287-5858
Ins：
artfoxpro
Email:
Facebook:
https://www.facebook.com/artfox.pro
LA Address:
733 9th Ave, City of Industry, CA 91745,
United States
TX Adress:
3125 N Great Southwest Parkway Suite 200
Grand Prairie TX 75050
SparkX
(Cool Spark Machine)
Cool burn, no heat
13ft height maxium indoor (outdoor 18ft)
Local Stocks
5.Warranty Instructions
◆Warranty period：one year(the date of purchase)
◆IF the buyers do not user the same supplier’s powder,the
machine warranty period will b e 3 month. The buyer will pay
for the expenses if there are any componentschanges.
◆In such In the following cases, the product will notbe
guaranteed:
A: the product has been incorrectly operated and used
inadvertently, for example, over load, over pressure, and
firing;
B: the product was broken because of careless handling;
C: due to poor use of environmental factors and sound quality
problems, such as: humidity, voltage instability, etc.;
D: products have been modified by non factory personnel.
◆products comply with the warranty provisions, the factory
will not charge maintenance fees and accessories costs, for
more than the warranty period of the product, only the
corresponding parts, finished goods costs.
◆the contents of this warranty card, the company has the
right to interpret, if the user is unknown, please contact the
local distributors.
◆not covered by the warranty include: packing box,
packaging, product shell and hanger, remote control
transmitter battery.
6
1.Introduction:
Thank you for choosing the spark machine
We recommend that you carefully read these operating
instructions before commissioning the unit. Please follow the
instructions in this manual. This is the only way to ensure safe
operation, proper use and long service life.
Feature:
◆Environmental protection,safety:no gunpowder and noirritant
◆Support wireless control, LCD and DMX, operate is more
easy and convenient.
Maintenance：
◆Please clean the machine regularly. It will reduce the
replacement and repair cost of spare parts.
◆Do not use for a long time, to clean the machine and make
extra powder out.
Product description：
1. Spark nozzle 2. Powder entrance 3.handle
4.fuse 5.on/off switch 6. USB
7. DMX-512 8.Power out 9. power in
10. wire control plug 11. card scan zone
12. Display board
1
4.1 RFID card
◆Why we have to use safety card before use ?
To avoid damage to the machine caused by powders
not suitable for the machine.PLEASE USE OUR
POWDER ONLY!
To avoid the accident that may cause by unauthorized person or
children by mistake.
Please keep the card for the right person only.
◆Where you can find the card and How to use it？
The safety card is packaged together with our powders ,Each bag of
powder should have one card .
Tap the Card to the Induction zone to activate the device. Each card
enables the unit to work 20 minutes(that’s almost the using time for
one bag powder ). In the meantime, the card will be invalid after being
read one time.
◆How to check the remaining time？
Press “Menu” buttons till the page “Time” to check the remaining time
(minutes ) of using. Tap another new card to re-activate the unit when
the time is over.
2.
Safety instructions
◆Keep away from humidity, water and dust!
Avoid placing the device in a location with high
humidity or excessive dust.
◆Place the device on a firm ground!
To avoid vibrations always place the device on a firm ground.
◆Do not use chemicals for cleaning!
Use a clean and dry cleaning rag to remove dust. Metal parts can be
cleaned with a damped cleaning rag. Before cleaning always unplug the
device from the power supply.
◆If the device is not working properly!
If problems occur unplug the device from the power supply. The user
should not try to service the device independently. All repairs and
service must be performed by a qualified technician.
◆Eye Protection
The eye protection warning icon is Shown to indicate that you must be
protect your eyes when close to the machine during machine operation.
◆The safety distance to the audience must be 2meter
Never aim the nozzle on people and keep a distance from 1 meter to the
nozzle.Don't spray on the food.
◆ATTENTION!
Damages caused by the disregard of this user manual are not subject to
warranty. The dealer will not accept liability for any consequent secondary
failures. Only skilled workers are allowed to carry out the electrical
connections. All electrical and mechanical connections have to be carried
out according to the European safety standards.
The powder should not be exposed to the air. If a bag of powder is not
used up, it should be kept in a sealed condition and not exposed to open
fire.
NOTES:machine must be vertical if has powder in the tank.Must
take out all powder when machine shipped.
52
3
.
5
3.
Technical data
Wireless RF Controllers-------- W-3 Receiver/Dip
Switch +W-8 Usage Instructions：
◆When machine ready to spark out, the ready led will glow .There are 3
Channels(Dip 1-3) can be selected for group-1,group-2,group-3
1
- spark
2
- close or stop
3
-lasts 10 seconds.
5 - lasts 20 seconds.
7 - lasts 30 seconds.
4 - group 1 spark (Receiver = 1)
6 - group 2 spark (Receiver =2)
8 - group 3 spark (Receiver =3)
Wired Remote X-2 controller:
◆When the heating process is finished, the green light lights up and indicates
that the button on the remote control can be pressed. If heating is not
complete, the green light does not light up then the remote control cannot be
operated.
Specification ◆
3
4.
Operation
Before using：
◆Never stand directly below the device when it isbeing
mounted, removed or serviced.Have a qualifiedtechnician
check the device annually and additionally before placing into service if
stored for an extended period of time.
◆Install the device in a secure location that is inaccessible to
unauthorized persons.This machine can only be used byadults.
◆Make sure there is no flammable material within a 10ft radius of the
device.There can be no objects blocking the use of themachine.
◆Be sure that the local power outlet match that or the required voltage
for your machine.
◆Can not join any flammable liquid, such as oil andgas.
◆Be sure the lid is well covered before use the machine,or the spark will splash
out.
Usage method
◆Place the unit on a flat,dry surface. The machine can be inverted, but
can not be sidelong, please pay attention to keep upright. Otherwise the
spark will not be vertical and probably make the machinedamaged.
◆fill the powder reservoir with our powder only then tighten the cap.
◆Scan the safety card before use (for more details about powder and Safety
card please check 4.1)
◆The device starts to heat up. This process needs 5 minutes, meanwhile
the display shows “UP”.
◆The heating process is finished. The display shows “READ“
1. Menu button ：press enter the menu and setting
data，more or less can be adjusted
2. Addr can setting DMX512 addr：min 1，max
512；
3. Fan：min is 10%，max is 100%，10% for 1 step
4.Time: show the machine left time，unit is second
4
Rated voltage
AC220V/50Hz/AC120V/60Hz
Rated power
500 W
fuse
10 A 5 A
Pre-heating time
<8 min
Spark max height
1-4M
Spark height change
support
Wireless controller
W-8
Display screen
Digital display board
DMX
support
DMX channel
1
DMX range
1-512
Net weight
6.6 Kg
Gross weight
7.5 Kg
Machine size
190*190*260 mm
Carton size
260*260*310 mm
Tabla de contenidos
Otros manuales de Equipo de DJ de ArtFox
ArtFox
ArtFox LED Spot 300W Manual de usuario
ArtFox
ArtFox Pixel Blinder Bar Manual de usuario
ArtFox
ArtFox Power Shine 14QX Manual de usuario
ArtFox
ArtFox Pixel Beam K7 Manual de usuario
ArtFox
ArtFox Magic 3D Manual de usuario
ArtFox
ArtFox Matrix Hybrid CMY Manual de usuario
ArtFox
ArtFox KingWash 7QX Manual de usuario
ArtFox
ArtFox SHINE BAR 18Q Manual de usuario
ArtFox
ArtFox MONSTER SPOT Manual de usuario
ArtFox
ArtFox SKY BEAM 9R Manual de usuario
Manuales populares de Equipo de DJ de otras marcas
thomann
thomann Stairville DJ Lase 40-G MK-III Manual de usuario
Eagletone
Eagletone 6 Eyes Flower Manual de usuario
EuroLite
EuroLite FLD-1508 Manual de usuario
Technical Pro
Technical Pro LG8xSEA Manual de usuario
JB Systems
JB Systems Lounge Laser DMX Manual de usuario
Lightmaxx
Lightmaxx Vega Halo 90 Manual de usuario
Elation
Elation FUZE WASH Z350 Manual de usuario
Maverick
Maverick MK3 WASH Manual de usuario
Infinity
Infinity TF-260C7 Fresnel Manual de usuario
Chauvet
Chauvet EVE E-50Z Manual de usuario
Eliminator Lighting
Eliminator Lighting E 138 Manual de usuario
EuroLite
EuroLite Mini Multicolor LED Flashing Light SC Manual de usuario