Artel FiberLink 3516 Manual de usuario
WWW.ARTEL.COM
MANUAL
2 or 4 Channel 3G/HD/SD-SDI
Transmission over one or two single
mode or multimode fibers
Installation and Operations
Manual
FiberLink®
3500 Series
Transceivers
Page 2
FiberLink 3500 Series
FiberLink 3500 Bi-Directional Series User’s Manual
Contents
Welcome ..................................................................3
Features...................................................................3
Package Contents ..........................................................3
Part Number Specifications .................................................4
General Specifications ......................................................5
Transmitter Section Specs ..................................................5
Serial Video BNC Inputs .....................................................5
Optical Output .............................................................6
Receiver Section Specs .....................................................6
Optical Input ..............................................................6
Serial Video BNC Outputs ...................................................6
Operating Loss Budget......................................................7
Maximum Useable Distance .................................................7
System Specifications ......................................................7
Installation Instructions ....................................................8
Alarm Switch Settings & Options.............................................9
Indicator LEDs ........................................................... 10
Operating Pointers ....................................................... 11
Troubleshooting ......................................................... 11
Maintenance and Repairs ................................................. 12
FiberLink 6656 Visible Light Source......................................... 13
FiberLink 6650 Optical Power Meter ........................................ 13
FiberLink 6652 and 6654 Dual Wavelenth Light Source ....................... 13
Related Products......................................................... 14
Contents
Page 3FiberLink 3500 Bi-Directional Series User’s Manual
FiberLink 3500 Series
Welcome
Thank you for purchasing Artel Video Systems’ FiberLink 3500 Series. The 3500 Series
is used to transmit up to 4 channels of 3G/HD/SD-SDI with or without pre-embedded au-
dio and data over a single or dual fiber optic core. The FiberLink 3500 Series is compat-
ible with single mode or multimode fiber. The system delivers noise-free transmis-
sion that retains all of the signals’ initial parameters, regardless of fiber optic cable
attenuation. The 3500 Series also provides immunity to video pathological signals over
the entire link budget and operating temperature range. The 3500 series consists of
a number of transmitter/receiver options. Artel recommends you download the
data sheet for your specific model to augment the information in this manual.
Features
• Each input signal is equalized and re-clocked prior to fiber optic transmission
• Immunity to pathological signals over entire link budget and operating
temperature range
• Compliant with SMPTE ST 425-3, ST 425-5, 424M-2006, 259M-2006, 292-2006
• Supports transmission of SMPTE 305M-2005, 310M-2004, 344M-2000, DVB-ASI
• Supports both Single Mode and Multimode ( 62.5u & 50u) fiber types
• Supports 3G/HD/SD-SDI inputs with embedded audio and data and DVB-ASI.
• 14dB Optical Link Budget - 2.97 Gbps (19dB for high power models)
• Wide operating temperature range: -10º C to +50º C
• Available in Box and Card versions
• Card version compatible with the FiberLink 6000A Rack Card Cage
• Designed and manufactured in the USA by Artel
Package Contents
This User’s Manual and ONE of the following FiberLink models
• 3516 transceiver
• 3517 transceiver
• 3518 transceiver
• 3519 transceiver
• 3526 transceiver
• 3528 transceiver
• 3529 transceiver
Welcome | Features | Package Contents
Page 4
FiberLink 3500 Series
FiberLink 3500 Bi-Directional Series User’s Manual
Part Number Specication for Transceiver Pairs
3516 ..............................................3517
3518 ..............................................3519
3526 ..............................................3526
3528 ..............................................3529
Technical Specifications
ls Part Number Pairs with Part Number
Each Part Number above must include a suffix designation to indicate the following:
• Box or Card, Wavelength, Optical Connector.
The suffix will look like this example when completed:
Model - B7S = Box, standard laser, ST connector
Model - C7L = Card, standard laser, LC connector
Case Style: Box.............................................-B
Rack Card .......................................-C
Wavelength: MM only (See data sheet) .........................-3
Standard Power .................................-7
High Power, Single mode only (See data sheet) .....-9
Optical Connector: ST ..............................................-S
LC ..............................................-L
Box and Rack Card Sux Designations
Part Number Specifications
Page 5FiberLink 3500 Bi-Directional Series User’s Manual
FiberLink 3500 Series
Indicators
Power, HD/3G data rate lock,
SD/DVB-ASI data rate lock,
Alarm (Card version)
Box Version Dimensions 6.5W x 1.15H x 6L (in)
165W x 29H x 152L (mm)
Weight 12.3 ounces, 382 grams
Number of slots 3516, 3517, 3526 1 Slot
in 6000A card cage 3518, 3519, 3528, 3529 2 slots
Power 9-24 Volts AC or DC
4ch units - 5.0 Watts; 17.66 BTU/Hr
2ch units - 3.0 Watts; 10.23 BTU/Hr
Operating Temperature -10ºC to +50ºC
Technical Specifications
*
Serial Video BNC Inputs
Number of Inputs 2 or 4 BNC, 75 Ohms
Data Rate Range 19.4 Mbps to 2.97 Gbps
Standards Supported SMPTE ST 425-3, ST 425-5, 424M-2006, 259M,
292, 305M, 344M, DVB-ASI
Re-clocked Data Rates
270 Mbps (SMPTE 259M, DVB-ASI-270)
1.485 Gbps (SMPTE 292)
2.97 Gbps (SMPTE 424M-2006)
Equalization Automatic up to 100m of Belden
1694A at 2.97Gbps, 140m at 1.485
Gbps and 180m at 270 Mbps
Return Loss >10dB up to 2.97 Gbps
Signal Level 800mv ±10%
DC Oset 0V ±0.5V
Rise/Fall Time <135 ps at 2.97 Gbps per SMPTE 424M;
<270ps at 1.485 Gbps per SMPTE 292;
0.4 to 1.5ns at 270 Mbps per SMPTE 259M
General Specications
3500 Transmitter Section Specs
Page 6
FiberLink 3500 Series
FiberLink 3500 Bi-Directional Series User’s Manual
3500 *
Technical Specifications
3500 Transmitter Section Specs * (cont.)
Overshoot <10% of Amplitude
Timing Jitter <0.2 UI at 270Mbps; <1.0 UI at 1.485 Gbps;
<2.0 UI at 2.97 Gbps with color bar signal applied
Alignment Jitter <0.2UI at 270Mbps, <0.2UI at 1.485 Gbps;
<0.3 UI at 2.97 Gbps with color bar signal applied
Re-clocking At 270 Mbps, 1.485 Gbps & 2.97 Gbps
Optical Output
Connector LC or ST receptacle, PC polish
Wavelength * 1310nm & 1550nm
Emitter Type * FP Laser and/or DFB Laser
Maximum Output Power * -3 dBm Standard, +2dBm High Power
Optical Input
Connector LC or ST receptacle, PC polish
Wavelength * 1310nm &1550nm
Minimum Input Power * -17 dBm at 2.97 Gbps,
-20 dBm at 1.485 Gbps,
-20 dBm at 270 Mbps
Maximum Input Power -1 dBm
Serial Video BNC Outputs
Number of Outputs * 2 or 4 BNC, 75 Ohms, non-inverting
Signal Level 800mv ±10%
DC Oset 0V ±0.5V
Receiver Section Specs
* See Specific Data Sheet For Your Model
Page 7FiberLink 3500 Bi-Directional Series User’s Manual
FiberLink 3500 Series
3500 Transmitter / Receiver *
Rise/Fall Time <135ps at 2.97 Gbps per SMPTE 424M;
<270ps at 1.485 Gbps per SMPTE 292;
0.4 to 1.5ns at 270 Mbps per SMPTE 259M
Overshoot <10% of Amplitude
Timing Jitter <0.2UI at 270Mbps, <1.0UI at 1.485 Gbps;
<2.0UI at 2.97 Gbps with color bar signal
applied
Alignment Jitter <0.2UI at 270Mbps, <0.2UI at 1.485 Gbps;
<0.3UI at 2.97 Gbps with color bar signal
applied
Re-clocking At 270 Mbps, 1.485 Gbps and 2.97 Gbps
Technical Specifications
Technical Specifications
3500 Receiver Specications * (cont.)
Operating Loss Budget
Single Mode Fiber 0-14 dB at 2.97 Gbps 0-15 dB at 1.485 Gbps
0-15 dB at 270 Mbps
Multimode Fiber (62.5u) 0-14 dB at 2.97 Gbps 0-15 dB at 1.485 Gbps
0-15 dB at 270 Mbps
Multimode Fiber (50u) 0-14 dB at 2.97 Gbps 0-15 dB at 1.485 Gbps
0-15 dB at 270 Mbps
Maximum Useable Distance
Single Mode Fiber 30(60) km at 2.97 Gbps 48(65) km at 1.485 Gbps
STD(HighPower) 50(70) km at 270 Mbps
Multimode Fiber (62.5u) 0.8 km at 2.97 Gbps 1 km at 1.485 Gbps
2.5 km at 270 Mbps
Multimode Fiber (50u) 1 km at 2.97 Gbps 1.3 km at 1.485 Gbps
3 km at 270 Mbps
System Specications
* See Specific Data Sheet For Your Model
** Distance specifications are approximate, based upon connecting a 3500 Transmitter to a 3500 Receiver, and are not guaranteed.
Artel cannot estimate or guarantee operating loss budgets when the 3500 Series is used with other, non-FiberLink devices.
Operating loss budget must not be exceeded. See data sheet for your specific model(s).
* See Specific Data Sheet For Your Model
**
**
Page 8
FiberLink 3500 Series
FiberLink 3500 Bi-Directional Series User’s Manual
Figure 1:
Power Connector
DC Input Polarity
9-24 Volts
AC or DC
(+) Positive
( - ) Negative
Installation Instructions
The FiberLink 3500 Series of fiber optic transmission systems are ready for immediate use
and do not require any special tools or equipment. However, an Optical Power Meter, such
as the FiberLink 6650, can be useful in determining optical loss budgets during your systems
design and maintenance.
The following instructions describe the typical installation procedure:
1) Connect the fiber optic cable to the transceiver units.
2) Connect the video source to the video input BNC connector on the transmitter unit.
3) Connect the video output cable to video output BNC connectors on
the receiver unit.
4) Terminate any unused BNC output connector at 75 Ohms.
5) Connect the Universal Power Supply to the transmitter and receiver units.
For box versions using DC power, please refer to figure 1.
6) When power is applied, the green POWER LED should illuminate, indicating the
presence of operating power. The 3G/HD/SD RATE LED will give an indication as
described in the Indicator LED’s and Alarm Circuitry section of this manual.
7) The system should now be operational.
Note: The Rack Card version has an additional red LED for indicating the presence of an alarm
condition (loss of signal). Refer to Indicator LED’s and Alarm Circuitry sections of this manual.
Installation Instructions
The transmitting element in the FiberLink 3500 transmitter unit
contains a solid state Laser Diode located in the optical connec-
tor. This device emits invisible infrared electromagnetic radiation
which can be harmful to human eyes. The radiation from this opti-
cal connector, if viewed at close range with no fiber optic cable
connected to the optical connector, may be suicient intensity to
cause instantaneous damage to the retina of the eye. Direct view-
ing of this radiation should be avoided at all times!
Page 9FiberLink 3500 Bi-Directional Series User’s Manual
FiberLink 3500 Series
Switch Position Alarm Indication On O
Tx 1 Loss of Input Video Enabled Disabled
Rx 1 Loss of Optical Signal Enabled Disabled
Tx 2 Loss of Input Video Enabled Disabled
(3518/19/28/29 Only)
Rx 2 Loss of Optical Signal Enabled Disabled
(3518/19/28/29 Only)
Alarm Switch Settings & Options
The Rack Card version of this product has an additional red indicator LED that illuminates
when an alarm condition exists.
The rack card unit also provides an output to drive a model 6020A Alarm Sensing Module
which provides an audible tone and activates a set of contacts for external signaling
purposes.
Alarm Switch Settings & Options
Alarm Switch Settings for the Transceiver Card
Page 10
FiberLink 3500 Series
FiberLink 3500 Bi-Directional Series User’s Manual
Transmitter LEDs (For Each Channel)
LED Status Denition
Power On Indicates that correct power has been applied.
HD/3G Rate O Indicates no HD/3G-SDI data rate lock
On Indicates HD/3G-SDI data rate lock at
1.485Gbps, 2.97 Gbps,
SD Rate O Indicates no SD-SDI or DVB-ASI data rate lock
On Indicates SD-SDI or DVB-ASI data rate lock
at 270 Mbps
Alarm On Loss of input video (card version only)
Note: The 3G, HD and SD LEDs indicators are o when a non-standard signal is applied.
Receiver LEDs (For Each Channel)
LED Status Definition
Power On Indicates that correct power has been applied.
HD/3G Rate O Indicates no HD/3G-SDI data rate lock
On Indicates HD/3G-SDI data rate lock at
1.485Gbps, 2.97 Gbps
SD Rate O Indicates no SD-SDI or DVB-ASI data rate lock
On Indicates SD-SDI or DVB-ASI data rate lock
and re-clocked video available on outputs
Alarm On Loss of optical signal (card version only)
Note: The 3G, HD and SD LEDs indicators are o when a non-standard signal is applied.
Indicator LEDs
The FiberLink 3500 Series has integral indicator LEDs that are used to monitor the state of
the unit. Card versions have an additional Alarm LED.
LED Indicators
Este manual sirve para los siguientes modelos
6
Tabla de contenidos
Otros manuales de Transceptor de Artel
