ARRI CCM-1 Manual de usuario
CCM-1
Camera Control Monitor
OPERATING MANUAL
August 2023 • 1.0 • English
Imprint
CCM-1 Operating Manual 3
Imprint
© 2023 Arnold & Richter Cine Technik GmbH & Co. Betriebs KG. All rights reserved.
The device contains proprietary information of Arnold & Richter Cine Technik GmbH & Co. Betriebs
KG; it is provided under a license agreement containing restrictions on use and disclosure and
protected by copyright law. Reverse engineering of the software is prohibited.
No part of this publication may be used for distribution, reproduction, transmission, transcription,
storage in a data retrieval system, or translated into any language in any form by any means without
the prior written permission of Arnold & Richter Cine Technik GmbH & Co. Betriebs KG.
If you are downloading files from our web pages for your personal use, make sure to check for
updated versions.
ARRI cannot take any liability whatsoever for downloaded files, as technical data are subject to
change without notice.
Due to continued product development the information in this document may change without notice.
The information and intellectual property contained herein is confidential between ARRI and the
client and remains the exclusive property of ARRI. If you find any problems in the documentation,
please report them to us in writing. ARRI does not warrant that this document is flawless.
AMIRA, ALEXA, ALEXA XT, ALEXA SXT, ALEXA LF, ALEXA Mini and ALEXA Mini LF are
trademarks or registered trademarks of Arnold & Richter Cine Technik GmbH & Co. Betriebs KG. All
other brands or products are trademarks or registered trademarks of their respective holders and
should be treated as such.
Original version.
For Further Assistance
Arnold & Richter Cine Technik GmbH & Co. Betriebs KG
Herbert-Bayer-Str. 10
D-80807 Munich
Germany
E-mail: [email protected]
Website: www.arri.com/en/technical-service
Content
iv CCM-1 Operating Manual
Content
Imprint .......................................................................................................................................................... 3
1 About this document .................................................................................................................................. 5
2 About this Product ...................................................................................................................................... 6
2.1 Introduction ........................................................................................................................................... 6
2.2 Intended Use......................................................................................................................................... 6
2.3 Identification .......................................................................................................................................... 6
2.4 Environmental Conditions ..................................................................................................................... 6
2.5 Technical Data ...................................................................................................................................... 7
2.6 Dimensional Drawing ............................................................................................................................ 8
2.7 Scope of Delivery and Warranty ........................................................................................................... 8
2.8 Approval Information ............................................................................................................................. 9
3 Safety Instructions ...................................................................................................................................... 11
3.1 General Safety Instructions................................................................................................................... 12
4 Product overview ....................................................................................................................................... 15
Layout ................................................................................................................................................... 15
5 Mounting and Assembly............................................................................................................................. 16
5.1 Power Supply and Connect................................................................................................................... 16
5.2 Attachment of Accessories.................................................................................................................... 16
5.3 Sunhood................................................................................................................................................ 17
6 Basic Operation........................................................................................................................................... 18
6.1 ARRI Camera Controls ......................................................................................................................... 18
6.1.1 Classic Menu ............................................................................................................................. 18
6.1.2 Home Screen ............................................................................................................................. 18
6.1.3 Interactive Overlays ................................................................................................................... 18
6.1.4 Playback Control........................................................................................................................ 19
6.2 PageOS Overview................................................................................................................................. 19
6.2.1 General Layout .......................................................................................................................... 19
6.2.2 Basic Navigation ........................................................................................................................ 20
6.2.3 Pages......................................................................................................................................... 20
6.2.4 Settings ...................................................................................................................................... 21
7 Cleaning, Maintenance and Repair............................................................................................................ 23
8 Transportation, Storage and Disposal ...................................................................................................... 24
9 ARRI Service Contacts ............................................................................................................................... 25
About this document | 1
CCM-1 Operating Manual 5
1 About this document
This operating manual is aimed at everyone involved in using the device. It provides directions on
how to operate it safely and as intended. To ensure safe and correct use, all users must read the
operating manual before using the device for the first time.
This operating manual is an essential part of the device. It must be easily accessible and in close
proximity to the device so that users can use it as a reference anytime.
The separate user manual contains more detailed information about the features and functionalities
of the device. Please visit the website www.arri.com to download the user manual.
Keep the operating manual, the user manual and all other operating and assembly instructions
belonging to the device in a safe place for future reference and possible subsequent owners.
For useful information in addition to these manuals please have a look at the ARRI learn & help
section on the ARRI website.
The ARRI Academy courses provide unrivalled insights into the full possibilities of working with ARRI
camera systems, lenses, lighting systems and accessories.
Our advanced service training courses are designed to transfer detailed knowledge about how to
service and repair all types of ARRI products and give you permanent access to detailed Service
instructions, special tools and spare parts. To learn more, please visit ARRI academy or contact
www.arri.com/ccm-1
Document Revision History
Document ID: D45 1000 7638
Version Release Date Note
1.0 K11303 July 2023 First Release
2 | About this Product
6 CCM-1 Operating Manual
2 About this Product
2.1 Introduction
The CCM-1 is a 7” onboard monitor that provides full camera control and menu access for the
ALEXA 35 and ALEXA Mini LF. The CCM-1 is ideally suited to numerous production types and
applications.
For camera operators who prefer to judge framing and exposure with an onboard monitor rather
than a viewfinder, the CCM-1 is an easy choice.
2.2 Intended Use
The CCM-1 is a camera control monitor for professional use in broadcast and film production
environments.
NOTICE
All versions of the CCM-1 are intended exclusively for professional use. It must be used only by
skilled personnel. Read and understand the operating manual and the user manual before use.
Use the product only for the purpose described in this document. Always follow the safety
instructions and system requirements for all equipment involved. ARRI assumes no liability for
damages or changes that are caused by improper use. You are not allowed to modify the device.
2.3 Identification
The CCM-1 serial number is located on the
product label in the lower center of the CCM-1.
The serial number consists of the last 4 digits of
the product number K2.00YYYYYY-1234 (here:
1234).
2.4 Environmental Conditions
The CCM-1 should only be used and stored under certain environmental conditions.
Check the following conditions before commissioning and operation:
Permissible Operating Temperature 32° F to 113° F (0° C - 45° C)
Permissible Storage Temperature -4° F to 158° F (-20° C - 70° C)
Permissible Humidity 0 - 95% RH
non condensing
About this Product | 2
CCM-1 Operating Manual 7
2.5 Technical Data
Mechanical Specification
Dimensions (H x W x D) 4.72 x 7.36 x 1.15 in (120 x 187 x 29 mm)
Weight 0.65 lbs (0,3 kg)
Material Aluminum alloy
Arm mounting 4x ARRI Pin-Lock1/4" mounting points (Top, Bottom, Rear,
Right Side)
Hood mounting Friction attach
Electrical Specification
Power input PWR + VF connector
Power consumption up to 20 W
Firmware requirement Compatible with TBD firmware or later
Optical Specification
LCD Type Thin Film Transistor Liquid Crystal Display (TFT LCD) with LED
backlight
Resolution 1920 x 1200
Pixel density 322 ppi
Active screen size 3.72 x 5.95 in (95 x 151 mm)
Refresh rate 30Hz - 60Hz (Locked to incoming frame rate between 7.5fps
and 60fps)
Response time 25 ms
Contrast 1.200 : 1
Screen luminance ~1300 cd/m2 (max.) Backlight Dimming 100% to 0%
Color depth 8+2FRC
Luminance uniformity (typical) 89%
Colors (typical) 96% DCI-P3
Viewing angle 160° all axes
Display orientation Landscape, 180° rotation
User Interface
Touch pCap Multi-Touch
Buttons Menu
User Button 1-4
Back
Power
Lock Slider
Joystick
2 | About this Product
8 CCM-1 Operating Manual
2.6 Dimensional Drawing
All Dimensions in mm.
2.7 Scope of Delivery and Warranty
NOTICE
The packaging consists of recyclable materials. For the sake of the environment, dispose of the
packaging material at a suitable disposal site. Always store, ship and dispose according to local
regulations. ARRI is not liable for consequences from inadequate storage, shipment or disposal.
On delivery, please check if package and content are intact. Never accept a damaged or incomplete
delivery.
About this Product | 2
CCM-1 Operating Manual 9
Delivery
A complete Camera Control Monitor CCM-1 Set KK.0048851 includes:
• 1x K2.0048523 CCM-1 with Foldable Sunhood, Screen Protector
• 1x K2.0048394 Monitor Arm for Camera MAC-1
• 1x K2.0023943 Cable VF (0.5 m / 1.5 ft)
• 1x K2.0001637 Cable RS – RS/PWR IN (0.5 m / 1.5 ft)
Warranty
For scope of warranty, please ask your local ARRI Service Partner. ARRI is not liable for
consequences from inadequate shipment, improper use or use of third-party products.
2.8 Approval Information
The CCM-1 is approved for use in many countries, including European Union, USA, UK, Canada,
China, Japan, Australia, New Zealand, and Thailand.
The import and use in other countries may be subject to legal, official or regulatory requirements and
regulations. It is the importer's or the user's responsibility, prior to importation or use, to inform
themselves of the applicable legal, regulatory and administrative requirements and regulations and
to ensure compliance with these requirements and regulations. This includes the applying for and
obtaining of all necessary approvals or registrations.
As far as reasonable and legally possible, ARRI will support requests in relation to such applications
by providing technical documents or declarations. As an importer or user, you confirm that you are
familiar and comply with the legal, regulatory, and administrative requirements and regulations that
apply in the countries to which you ship or use the products. You further confirm that you will
arrange for any necessary registrations, enrollments, or authorizations that are required in such
countries.
You release ARRI from all obligations resulting from any legislative, regulatory, or administrative
requirements regarding import or use of the products, except in countries where ARRI has obtained
a registration or certification. You agree to indemnify, defend, and hold ARRI harmless from any and
all claims, damages, losses, liabilities, costs, and expenses (including reasonable fees of attorneys
and other professionals) that may arise out of a demand on ARRI in connection with your obligations
mentioned above.
EU Declaration of Conformity
Brand Name: ARRI
Product Description: Camera Control Monitor-1
CCM-1
The product conforms to the specifications of the following European directives:
• Directive 2014/30/EU of the European Parliament and the Council of 26 February 2014 on the
harmonization of the laws of the Member States relating to electromagnetic compatibility
• Directive 2011/65/EU of the European Parliament and the Council of 8 June 2011 on the
restriction of the use of certain hazardous substances in electrical and electronic equipment and
the Commission Delegated Directive (EU) 2015/863 of March 31, 2015.
The compliance with the requirements of the European Directives has been verified by applying the
following standards:
• EN 55032:2015 +AC:2016 +A1:2020 +A11:2020 ; EN 55035:2017 +AC:2019 +A11:2020 ;
• EN IEC 63000:2018
The manufacturer bears sole responsibility for issuing this declaration of conformity.
2 | About this Product
10 CCM-1 Operating Manual
UK Declaration of Conformity
Brand Name: ARRI
Product Description: Camera Control Monitor-1
CCM-1
The product conforms to the specifications of the following United Kingdom regulations:
• The Electromagnetic Compatibility Regulations 2016
• The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic
Equipment Regulations 2012
The compliance with the requirements of the United Kingdom regulations was proved by the
application of the following standards:
• EN 55032:2015 + A11:2020; EN 55035:2017 + A11:2020;
• EN IEC 63000:2018
The manufacturer bears sole responsibility for issuing this declaration of conformity.
FCC Class A Statement
FCC Class A Statement
Note: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
Caution: changes or modifications to the product not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Industry Canada Compliance Statement
Complies with CAN ICES-003(A)/NMB-003(A).
Australia and New Zealand Compliance
Brand Name: ARRI
Product Description: Camera Control Monitor-1
CCM-1
South Korea Compliance
Pending.
Taiwan Compliance
Pending.
Otros manuales para CCM-1
2
Tabla de contenidos
Otros manuales de Monitor de ARRI
