ARRI MINI-B AQUA CL3026 Manual de usuario

IN TRUCTION MANUAL

ENGLI H

INDEX

Page Contents

2 1. afety information

3 2. Unpacking and preparation

4 3. Installation and start-up

4 3.1 Installing the fixture

5 3.2 Connecting to manis supply

5 3.3 Connecting the control signal line: DMX / Art- et

5 3.4 Switching on the fixture and basic setup

7 4. Maintenance

7 4.1 Maintenance and Caution

8 4.2 Battery removal

9 4.3 Opening the covers

10 5. Dimensions

11 6. Cause and solution of problems

CL3026

Congratulations on choosing a Claypaky product!

We thank you for your custom.

Please note that this product, as all the others in the

rich Claypaky range, has been designed and made with

total quality to ensure excellent performance and best

meet your expectations and requirements.

MINI-B AQUA

Mini-B Aqua

AFETY INFORMATION

IMPORTA T: Claypaky recommends you carefully read and keep the safety information on this product, also

available in digital format at the following link:

www.claypaky.com

Ref: [FIS02L - Safety information Mini-B Aqua]

INFORMAZIONI DI ICUREZZA

IMPORTA TE: Claypaky raccomanda di leggere accuratamente e conservare le informazioni di sicurezza relative

a questo prodotto, sempre reperibili in versione digitale al seguente link:

www.claypaky.com

Rif: [FIS02L - Safety information Mini-B Aqua]

INFORMATIONEN ZUR ICHERHEIT

WICHTIG: Claypaky empfiehlt, die Sicherheitsinformationen bezüglich dieses Produkts genau zu lesen und

aufzubewahren. Sie sind in Digitalversion immer unter folgendem Link auffindbar:

www.claypaky.com

Ref: [FIS02L - Safety information Mini-B Aqua]

INFORMACIONE DE EGURIDAD

IMPORTA TE: Claypaky recomienda leer detenidamente y conservar la información de seguridad relativa a este

producto. Además, está disponible una versión digital de la misma en el siguiente enlace:

www.claypaky.com

Ref: [FIS02L - Safety information Mini-B Aqua]

CON IGNE DE ÉCURITÉ

IMPORTA T: Claypaky recommande de lire attentivement et de conserver les informations de sécurité relatives à

ce produit, disponibles en version digitale au lien suivant:

www.claypaky.com

Réf. : [FIS02L - Safety information Mini-B Aqua]

ИНСТРУКЦИЮ ПО ТЕХНИКЕ БЕЗОПАСНОСТИ

ВАЖНО: Claypaky рекоменд ет внимательно прочитать и сохранить инстр кцию по технике безопасности

данного изделия, которая всегда дост пна в электронном формате по след ющей ссылке:

www.claypaky.com

Наименование: [FIS02L - Safety information Mini-B Aqua]

1. AFETY INFORMATION

Mini-B Aqua

Packing contents - Fig. 1

2. UNPACKING AND PREPARATION

Mini-B Aqua

3. IN TALLATION AND TART-UP

Installing the projector - Fig. 2

The projector can be installed on the floor on a truss or on the ceiling or wall.

WARNING: with the exception of when the projector is positioned on the floor, the safety cable m st be fitted. (Cod. 105015/802 available on req est).

This m st be sec rely fixed to the s pport str ct re of the projector and then connected to the fixing point.

3.1 Installing the fixture

IP66 valve

Display User buttons Power IN Ethernet

DMX IN

(5 pin)

DMX THRU

(5 pin)

Power IN

Control panel - Fig. 3

Mini-B Aqua

Connecting to the control signal line (DMX) - Fig. 5

Use a cable conforming to specifications EIA RS-485: 2-pole twisted, shielded, 120Ohm characteristic impedance, 22-24 AWG, low capacity. Do not use

microphone cable or other cable with characteristics differing from those specified. The end connections must be made using XLR type 5 pin male/female

connectors. A terminating plug must be inserted into the last projector with a resistance of 120Ohm (minimum 1/4 W) between terminals 2 and 3.

IMPORTANT: The wires must not make contact with each other or with the metal casing of the connectors. The casing itself must be connected to the

shield braid and to pin 1 of the connectors.

SIGNAL

SCREEN

DMX 512

5 PIN

SIGNAL

Ethernet

Connecting to the mains supply - Fig. 4

Mains

Continue ‘

3.3 Connecting the control signal line: DMX / Art-Net

3.2 Connecting to manis supply

witching on the projector - Fig. 6

Plug the power connector. The projector starts resetting the effects. At the same time, the following information scrolls on the display:

Model Firmware Dmx Address xxx

Mini-B Aqua Version X.X.X

Date - Hour

On conclusion of resetting in case of absence of the dmx signal, Pan and Tilt move to the “Home” position (Pan 128 bit - Tilt 128 bit). The control

panel (Fig. 8) has a display and buttons for the complete programming and management of the projector menu. The display can be in one of two

conditions: rest status and setting status. When it is in the rest status, the display shows the projector’s DMX address.

During menu setting status, after a wait time (about 30 seconds) without any key having been pressed, the display automatically returns to rest status.

It should be noted than when this condition occurs, any possible value that has been modified but not yet confirmed with the

key will be cancelled.

Dmx Address

Warning Message

3.4 witching on the fixture and basic setup

Mini-B Aqua

Reversal of the display - Fig. 7

To activate this function, press UP

and DOW

keys simultaneously while the display is in the rest mode. This status will be memorised and

maintained even for the next time it will be switched on. To return to the initial state, repeat the operation all over again.

etting the projector starting address

On each projector, the starting address must be set for the control signal (addresses from 1 to 512).

The address can also be set with the projector switched off.

IMPORTANT: If there is no DMX input signal the address displayed blinks.

Functions of the buttons - Using the menu

etting addresses and options with the projector disconnected

The projector DMX address, as well as other possible operating options, can also be set when the appliance is disconnected from the electricity supply.

All that is needed is to press E TER to momentarily activate the display and thus access the settings. Once the required operations have been carried

out, the display will switch off again after a wait time of 30 seconds.

U ING THE MENU:

1) Press MODE once – “Main Menu” appears on the display.

2) Use the UP

and DOW

keys to select the menu to be used:

• Setup (Setup Menu): To set the setting options.

• Option (Option Menu): To set the operating options

• Information (Information Menu): To read the counters, software version and other information.

• Manual Control (Manual control Menu): To trigger the test and manual control functions.

• Test (Test Menu): To check the proper functioning of effects

• Advanced (Advanced Menu): Access to the "Advanced menu" is recommended for trained technical personnel.

3) Press

to display the first item in the selected menu.

4) Use the UP

and DOW

keys to select the ME U items.

Confirms the displayed value, or activates the displayed function,

or enters the successive menu.

Decreases the value displayed (with auto-repetitions) or passes to the next item in the menu.

Increases the value displayed (with auto-repetitions) or passes to the previous item in a menu.

Return to the top level.

Enters the successive menu.

DOW

MODE

E TER

Mini-B Aqua

WARNING

- IP 66 fixture

- Failure to completely remove power from fixture prior to servicing can lead to serious injury or death.

For additonal service information please contact [email protected]

IMPORTANT

The screws to be removed have rubber sleeve gaskets at the threaded end of the screw. DO OT LOOSE these. They must be reinstalled when

reassembly is done. If these rubber sleeve gaskets are damaged, they must be replaced with exact original equipment (OE) parts, we also suggest to

replace the rubber sleeve gasket every 2 years.

To mantain IP66 rating each covers have rubber gasket on it, If any rubber gasket is lost or damaged, they must be replaced by an original equipment

(OE) parts, we also suggest to replace the rubber sleeve gasket every 2 years.

CAUTION:

• It is recommended not to use compressed air with more than 4 atmospheres for cleaning the internal parts of the fixture, led board area.

This is to avoid damaging electronic components.

•To ensure optimal operation and performance for a long time it is essential to periodically clean the parts subject to dust and grease deposits. The

frequency with which the following operations are to be carried out depends on various factors, such as the amount of the effects and the quality of

the working environment (air humidity, presence of dust, salinity, etc.).

It is recommended that the projector undergoes an annual service by a qualified technician for special maintenance involving at least the following operations:

- General cleaning of internal parts.

- Restoring lubrication of all parts subject to friction, using lubricants specifically supplied by Claypaky.

- General visual check of the internal components, cabling, mechanical parts, etc.

- Electrical, photometric and functional checks; eventual repairs.

Cleaning the lenses

Only use neutral soap and water to clean the lenses, then dry it carefully with a soft, non-abrasive cloth. (WAR I G: the use of alcohol or any other

detergent could damage the lenses).

Continue ‘

Periodical cleaning

4. MAINTENANCE

4.1 Maintenance and Caution

Light collimation system

This product contains internal light

collimation system. Avoid intense

light from any angle.

Mini-B Aqua

Battery removal - Fig. 9

This product contains a rechargeable battery. To preserve the environment, please dispose the battery at the end of its life according to the

regulation in force.

4.2 Battery removal

Mini-B Aqua

Opening the covers - Fig. 10

4.3 Opening the covers

194

(7.64")

331

(13.03")

413

(16.26")

250

(9.84")

225

(8.86")

280

(11.02")

415

(16.34")

Mini-B Aqua

5. DIMEN ION

Mini-B Aqua

Tabla de contenidos

Otros manuales de Equipo de DJ de ARRI

ARRI

ARRI DAYLIGHT 18/12 PLUS Manual de usuario

ARRI

ARRI True Blue T1 Manual de usuario

ARRI

ARRI ARRI 150 Manual

ARRI

ARRI L10 Manual

ARRI

ARRI ARRISUN 18 Event Manual de usuario

ARRI

ARRI Claypaky AXCOR BEAM 300 Manual de usuario

ARRI

ARRI Claypaky Arolla Aqua Manual de usuario

ARRI

ARRI SkyPanel S360-C Manual

ARRI

ARRI L Series Manual de usuario

ARRI

ARRI COMPACT 575 Manual

ARRI

ARRI Claypaky Midi-B FX Manual de usuario

ARRI

ARRI ARRI D 5 Manual

ARRI

ARRI L10 Manual de usuario

ARRI

ARRI ARRI 150 Manual

ARRI

ARRI L Series Manual de usuario

Manuales populares de Equipo de DJ de otras marcas

ALPHA LITE

ALPHA LITE ALPHA 1500 Manual del propietario

Chauvet

Chauvet OVATION E-930VW Manual de usuario

Zumtobel

Zumtobel APHRODITE Home Manual de usuario

Snow Masters

Snow Masters Zig Oscillator Manual de usuario

EuroLite

EuroLite 50530554 Manual de usuario

Beamz

Beamz BUV243 Manual de usuario

thomann

thomann Stairville DJ Lase 40-G MK-III Manual de usuario

Eagletone

Eagletone 6 Eyes Flower Manual de usuario

EuroLite

EuroLite FLD-1508 Manual de usuario

Technical Pro

Technical Pro LG8xSEA Manual de usuario

JB Systems

JB Systems Lounge Laser DMX Manual de usuario

Lightmaxx

Lightmaxx Vega Halo 90 Manual de usuario

Elation

Elation FUZE WASH Z350 Manual de usuario

Maverick

Maverick MK3 WASH Manual de usuario

Infinity

Infinity TF-260C7 Fresnel Manual de usuario

Chauvet

Chauvet EVE E-50Z Manual de usuario

Eliminator Lighting

Eliminator Lighting E 138 Manual de usuario

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manual de usuario