ARETE POP Manual de usuario
User Guide
ARETE POP
Smart RFID Dongle Reader
ARETE POP User Guide
2 / 22
Notice
Registered Trademark
ARETE mobile is launched by PHYCHIPS Inc. for mobile device and currently registered worldwide
with its ARETE mobile trade mark legally protected by law.
© 2013 PHYCHIPS Inc. All rights reserved.
This User Guide is produced by PHYCHIPS Inc. and protected by Copyright Laws.
Please note that there may be possible mistake or omission of information in this document.
Applicable Device
This document is applicable for iOS 6.0 and Android 2.3.3 above
ARETE POP User Guide
3 / 22
Contents
1Understanding ARETE POP............................................................................4
1.1 ARETE POP at a Glance.................................................................................4
1.2 Accessories ....................................................................................................4
1.3 Specifications.................................................................................................5
2Basics...............................................................................................................6
2.1 Activating........................................................................................................6
2.2 Battery Charging ............................................................................................6
3How to use application....................................................................................7
3.1 How to install application in your iPhone.....................................................7
3.2 How to install application in your Android Phone........................................8
3.3 Main Display ...................................................................................................9
3.4 Status Bar .......................................................................................................9
3.5 Inventory....................................................................................................... 10
3.6 Read Tag Memory......................................................................................... 11
3.7 Write Tag Memory.........................................................................................12
3.8 Lock Tag Memory ......................................................................................... 13
3.9 Kill Tag Memory............................................................................................14
3.10 Output Power Setting...................................................................................15
3.11 On/Off Time Setting...................................................................................... 16
3.12 Stop Condition Setting.................................................................................17
3.13 Beep Setting ................................................................................................. 18
3.14 About.............................................................................................................19
4Information.....................................................................................................20
4.1 Safety Information........................................................................................20
4.2 RF Exposure Information.............................................................................20
4.3 Compliance Information...............................................................................20
4.4 Troubleshooting ...........................................................................................21
4.5 Disposal and Recycling ...............................................................................21
5Customer Service..........................................................................................22
ARETE POP User Guide
4 / 22
1 Understanding ARETE POP
1.1 ARETE POP at a Glance
1.2 Accessories
ARETE POP User Guide
5 / 22
1.3 Specifications
PHYSICAL
Dimension(WxLxH)
51 x 50 x 15 mm (without plug), 51 x 67.5 x 15 mm (with plug)
Weight
35g
Indication
Power on LED(Blue), Charging LED(Red), Tagging LED(Blinking Blue)
Battery
360mAh
Continuous Time
About 2.0 hours
Standby Time
About 17 hours
Charging
Micro USB 5pin
Color
White
RFID PERFORMANCE
RFID Reader Chip
PHYCHIPS PR9200
Air Protocol
EPCglobal Class 1 Gen 2 (ISO 18000-6C)
Interface
3.5mm stereo headphone jack
Part No. &
Operating Frequency
A100-K: 917.1 ~ 920.3 MHz (Korea Band)
A100-U: 917.1 ~ 926.9 MHz (US Band)
A100-E: 865.1 ~ 867.9 MHz (EU Band)
A100-J: 920.6 ~ 922.2 MHz (Japan Band)
OS
Apple iOS 6.0, Android 2.3.3 above (as of July 1st 2013)
Output Power(EIRP)
316mW(25dBm) for US, EU and Korea band
200mW(23dBm) for Japan band
RFID Read Distance
Up to 1.0m (depend on tags)
Antenna
Circularly Polarized Antenna
RFID Function
Read, Write, Lock, Kill
USER ENVIRONMENT
Operating Temp
0~40˚C
Storage Temp
-20~60˚C
REMARK
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
ARETE POP User Guide
6 / 22
2 Basics
2.1 Activating
1. Insert ARETE POP RFID Reader to your Phone's headphone jack.
2. Turn volume up to 100%.
3. Switch the button to "On" in App.
4. LED indicator will be turned on in blue color.
2.2 Battery Charging
1. Plug the plug of USB cable into the USB connector of ARETE POP. Plug the other end of
USB cable into a USB hub.
2. Battery will be charged by Micro B USB connector. It is compatible with general Micro B
USB connector.
3. Charging time is about 2 hours
4. Red LED: under charging
5. Blue LED: completed charging
ARETE POP User Guide
7 / 22
3 How to use application
3.1 How to install application in your iPhone
1. Select App Store
2. Search ARETE POP application and install it.
ARETE POP User Guide
8 / 22
3.2 How to install application in your Android Phone
1. Connect your phone to Google Play Store.
2. Search “ARETE POP” and touch install.
ARETE POP User Guide
9 / 22
3.3 Main Display
- Switch: Turn on or off the Reader
- Read Button: Start to read “Tag EPC”
- Clear Button: Remove Read Record
- Stop Button: Stop Tag Reading
- Display: Show Tag Read Record
3.4 Status Bar
The number of tags displayed
ARETE POP Status
- Unplugged: ARETE POP is not inserted into headset jack.
- Plugged: ARETE POP is inserted into headset jack.
- Connected: ARETE POP is connected to app.
Battery gauge
ARETE POP User Guide
10 / 22
3.5 Inventory
1. Switch the button to "On"
2. Touch Read button to inventory tag continuously
A. PC + EPC will appear.
3. Touch Stop button to finish inventory tag
4. Touch Clear button to clear the list of tags.
5. Some Android phones warn the high volume. Touch OK.
1 2 3
4 5
Step 11.
Connected
Tabla de contenidos
