Arec CI-21H Manual de usuario
User Manual English
AREC Inc.© All Rights Reserved 2018. l www.arec.com
All information contained in this document is Proprietary
CI-21H / CI-21S
Full HD PTZ Conference Camera 10X
2
CI-21H/CI-21S User Manual
This manual introduces the function installation and operation of the Camera.
Prior to installation and usage, please read the manual thoroughly.
1. Warning
(1) This product can be only used in specied range in order to avoid any damage or danger;
(2) Don’t expose the camera to rain or moisture place
(3) Don’t remove the cover to reduce the risk of electric shock. Refer servicing to qualied
personnel.
(4) Never operate the camera under unqualied temperature , humidity and power supply;
(5) Please use the soft cloth to clean the camera. Use neuter cleanser if bad smeared .Don’t
use the strong or cleanser avoiding scufng.
2. Electric Safety
Installation and operation must accord with electric safety standard.
3. Caution to transport
Avoid stress,vibration and soakage in transport,storage and installation.
4. Polarity of power supply
This product uses DC 12V power supply.
5. Careful of installation
(1) This series item must put on the smooth desk or platform,and it can not be installed
slant ways.
(2) Don’t apply in corrosive liquid,gas or solid environment to avoid the cover which is made
up of organic material.
(3) This product has a heating device inside, please keep ventilated.
(4) Never power on before installation is completed.
6. Don’t disassemble discretionarily
We are not responsible for any unauthorized modication or dismantling.
7. Attention
Electromagnetic led under certain rate may affect camera image!
Preface
CI-21H/CI-21S User Manual
Table of Contents
Preface
Product overview
Quick Installation Instructions
Connection
Chapter 1 Applications
1.1 RS-232 Interface
1.1.1 RS-232C interface specication as shown below
1.1.2 RS-232 Mini-DIN 8-pin Port Denition
1.1.3 RS232 (DB9) Port Denition
1.1.4 VISCA networking as shown below
1.2 Serial Communication Control
1.2.1 VISCA protocol list
1.2.2 Pelco-D protocol command list
1.2.3 Pelco-P protocol command list
Chapter 2. Remote Controller
2.1 Keys Instruction
2.2 Menu Setting
2.2.1 Main Menu
2.2.2 System Setting
2.2.3 Camera Setting
2.2.4 P/T/Z
2.2.5 Video Format
2.2.6 Version
2.2.7 Restore Default
Chapter 3. Network Connection
3.1 Direct connection
3.2 Internet connection mode
Chapter 4. Overview of the Web Interface
4.1 Preview
4.2 Playback
4.3 Conguration
4.3.1 Local congure
4.3.2 Audio congure
4.3.3 Video congure
4.3.3.1 Video encode
4.3.3.2 Stream publish
4.3.3.3 Video parameters
4.3.3.4 Video OSD
4.3.3.5 OSD font size
4.3.3.6 Video out
4.3.4 Network Congure
4.3.4.1 Network port
4.3.4.2 Ethernet parameters
4.3.4.3 DNS
4.3.4.4 GB28181
02
05
09
11
12
12
12
12
13
13
14
14
20
21
22
22
24
24
24
24
27
27
27
28
29
29
31
32
33
34
35
36
37
38
39
40
41
45
46
46
47
48
49
50
51
CI-21H/CI-21S User Manual
4.3.5 System congure
4.3.5.1 System attribute
4.3.5.2 System time
4.3.5.3 User set
4.3.5.4 Release upgrade
4.3.5.5 Restore factory defaults
4.3.5.6 Reboot
4.4 Logout
Chapter 5. Camera Maintenance and Troubleshooting
5.1 Camera Maintenance
5.2 Troubleshooting
Table of Contents
52
53
54
56
57
57
57
57
58
58
58
5
CI-21H/CI-21S User Manual
CI-21H/CI-21S Auto-Tracking PTZ Camera is a professional-grade high quality PTZ camera that also can track a moving
presenter automatically while shooting video. Combining a high-performance pan/tilt/zoom camera, compact design and
excellent motion-sensitive tracking technology, CI-21H/CI-21S is ideal for mid to large-size conference, huddle rooms, or
lecture capture, bridging the feature and price gap between current webcam and professional PTZ cameras in the market.
Product Overview
1. Dimension
95.00 116.00
151.64
128.89
154.50
131.25
118.74
14.00
6
CI-21H/CI-21S User Manual
2. Accessory
No. HDMI Model SDI Model
1Power Adaptor Power Adaptor
2RS-232 Cable RS-232 Cable
3USB3.0 Cable -
4Remote Controller Remote Controller
5Quick Installation Guide Quick Installation Guide
The camera offers perfect functions, superior performance and versatile interfaces. The features include advanced ISP
processing algorithms to provide vivid images with a strong sense of depth, high resolution and fantastic color rendition.
It supports H.264/H.265 encoding which makes motion video fluent and clear even with less than ideal bandwidth
conditions. By adopting high accuracy step driving motor mechanism, it works extremely quiet and moves smoothly and
very quickly to designated position. Product works stable and reliable, and it is easy to use, installation and maintenance.
3. Camera performance
7
CI-21H/CI-21S User Manual
4. Technical specication
Camera Parameter
Optical Zoom 10X, f=4.7~47mm
Sensor 1/2.8 inch high quality HD CMOS sensor
Effective Pixels 16: 9 2.07 megapixel
Video Format
HDMI/SDI video format
1080P60/50/30/25/59.94/29.97;1080I60/50/59.94;
720P60/50/30/25/59.94/29.97
U3 video format
(1) U3:1920X1080P60/50/30/25;1280X720P60/50/30/25;960X540P30;640X360P30;
640X480P30;352X288P30;960X540P30;
(2) U3 compatible with U2: 960X540P30; 640X360P30; 1280X720P10/15;
720X576P50; 720X480P60; 640X480P30; 352X288P30.
View Angle 6.43°(tele)--60.9°(wide)
Iris F1.6--F3.0
Digital Zoom 5X
Minimum Illumination 0.5Lux (F1.8,AGC ON)
DNR 2D & 3D DNR
White Balance Auto / Manual / One Push / 3000K / 3500K / 4000K / 4500K / 5000K /
5500K / 6000K / 6500K / 7000K
Exposure Auto / Manual / Shutter Automatic Exposure / Aperture Automatic Exposure /
Brightness priority
Focus Auto / Manual / One Push
Aperture Auto / Manual
Electronic Shutter Auto / Manual
BLC ON / OFF
WDR OFF / Dynamic level adjustment
Video Adjustment Brightness, Color, Saturation, Contrast, Sharpness, B/W mode, Gamma curve
SNR >55dB
Input/Output Interface
Video Interfaces HDMI Model: RS232(INPUT), LAN, HDMI, USB3.0
SDI Model: RS232(INPUT), LAN, SDI, A-IN
Image Code Stream Dual stream output
Image Output Multiple
Code Source Dual Code Source output(SDI/HDMI/USB3.0, LAN )
8
CI-21H/CI-21S User Manual
Video Compression
Format H.264, H.265
Audio Input Interface Double track 3.5mm linear input;
Audio Output SDI, HDMI, LAN output together with video
Audio Compression Format AAC, MP3, G.711A
HD IP Interface 100M IP port(100BASE-TX)
Network Protocol RTSP/RTMP, ONVIF, GBT28181; Support IP Visca control protocol; Distance update,
Distance restart, Distance reset
Control Interface RS232
Control Protocol VISCA/Pelco-D/Pelco-P; Baud Rate: 115200/9600/4800/2400 bps
Power Interface HEC3800 outlet (DC12V)
Supply Adapter AC110V-AC220V to DC12V/2A
Input Voltage DC12V±10%
Input Current 2A (Max)
Consumption 24W (Max)
PTZ Parameter
Pan Rotation ±135°
Tilt Rotation -30°~+30°
Pan Control Speed 0.1-60°/sec
Tilt Control Speed 0.1-30°/sec
Preset Speed Pan: 60°/sec, Tilt: 30°/sec
Preset Number 255 presets (10 presets by remote controller)
Other Parameter
Store Temperature -10°C~+60°C
Store Humidity 20% - 95%
Working Temperature -10°C~+50°C
Working Humidity 20% - 80%
Dimension (L x W x H) 151.64 x 154.5 x 128 mm
Weight 1.0 kg
Using Environment Indoor
9
CI-21H/CI-21S User Manual
Quick Installation Instructions
1. Camera interface and indicators description
No. CI-T21H CI-T21S
1Camera Lens Camera Lens
2Remote Controller Receiver Remote Controller Receiver
3Tripod Screw Hole (¼ UNC 20, Depth 6.5mm) Tripod Screw Hole (¼ UNC 20, Depth 6.5mm)
4Locating Hole (Ø5.5, Depth 6.5mm) Locating Hole (Ø5.5, Depth 6.5mm)
ARS232 Control Interface (Input) RS232 Control Interface (Input)
BLAN Interface LAN Interface
CHDMI Interface SDI Interface
DUSB3.0 Interface Audio-IN Interface
EDC12V Input Power Supply Socket DC12V Input Power Supply Socket
No. LED Color Glow Rule Operation
2
Red/Green
dual-color
light
Red light blinking Power Adaptor plug to Socket
Green light turns on Power on
Green light blinking Receive remote control signal
RS232 HDMI DC12V IN RS232 DC12V IN
3
4
1
2
B C D E
Figure 1.1 Figure 1.2
B C D E
A A
10
CI-21H/CI-21S User Manual
(1) Power on: Connect DC12V power supply adapter with power supply socket.
(2) Initial conguration: Power on with power indicator light on and remote control receiver light blinking, camera head
moves from bottom left to the bottom, and then goes to the HOME position (intermediate position of both horizontal
and vertical ),while the camera module stretches. When remote control receiver light stops blinking, the self-checking
is nished.
Note:
1. The default address of the remote controller is the 1# address.
2. If you set preset 0, when Power on self-test is completed, the camera automatically moves to the preset 0 position.
(1) Video Output from LAN
a. Network Cable Connection Port: Connect this product and your computer through network cable, the device LAN
interface refer to No B in Figure 1.1.
b. Webpage Login: Open your browser and enter 192.168.11.202 in the address bar (factory default); press Enter to
enter into the login page; click on the “player is not installed, please download and install!" and follow the
installation steps for installation. Then enter the user name admin and password admin (factory default); press
Enter to enter into the preview page, users can carry out PTZ control, video recording, playback, conguration and
other operations.
( Note: If you forget your user name, password, IP address, you can manually restore the default by the remote
controller key combination * # )
(2) HDMI Video Output
a. HDMI Video Cable Connection: HDMI Model refer to No.C in Figure 1.1.
b. Connect the camera and the monitor via HDMI video cable; video output is available after camera self-test.
(3) SDI Video Output
a. SDI video cable connection: SDI Model refer to No.C in Figure 1.2.
b. Connect the camera and the monitor via SDI video cable; video output is available after camera self-test.
(4) USB3.0 video output
a. USB3.0 video cable connection: HDMI Model refer to No.D in Figure 1.1.
b. Connect the camera and the monitor via USB3.0 video cable, open video display software, select image device, and
then video output will be available.
(5) USB3.0 compatible with USB2.0 output
a. USB3.0 video cable connection: HDMI Model refer to No.D in Figure 1.1.
b. Connect the camera and the monitor via USB3.0 video cable, open video display software, select image device, and
then video output will be available.
1.1 Power on initial conguration
1.2 Video output
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Cámara IP de Arec
