Arctiko LRE 700 Guía de inicio rápido

LRE 700/1400 & LFE 700/1400

IQ/OQ - INSTALLATION AND

OPERATIONAL QUALIFICATION

1/17 5084132-03

Introduction

The objective of this Installation and Operational Qualification (IQ/OQ)document is to qualify

the installation and operation of Arctiko appliances.

The Installation and Operational Qualification document definesthe minimum test procedures

and acceptance criteria to be used to establish that the Arctiko appliance is installed and op-

erated according to our specifications.

The Installation Qualification is intended to verify that the appliance is delivered in corre-

spondence with the ordered appliance and is installed in a correct environment.

The Operational Qualification is intended to verify the function of the appliance and its readi-

ness for operation.

Please be aware that local IQ/OQ procedures can require additional control and verification

during the validation.

If any documentation, which were not supplied with the appliance, should be needed for the

present qualification, such can be downloaded from the service website of Arctiko. Please con-

tact the distributor of the Arctiko appliance to obtain the documentation in question.

2/17 5084132-03

Index

1Basic information ......................................................................................................................3

1.1 Signature and device list................................................................................................................. 4

2Installation Qualification ..........................................................................................................5

2.1 Documentation verification ............................................................................................................5

2.2 Appliance check points................................................................................................................... 5

2.3 Environmental verification .............................................................................................................. 7

3Operational Qualification.........................................................................................................8

3.1 Parameter verification and adjustment....................................................................................... 8

3.2 Placement of test probes................................................................................................................9

3.3 Temperature mapping .....................................................................................................................11

3.4 Alarm and temperature recovery verification..........................................................................13

3.5 Deviations to criteria of acceptance (Deviation report)........................................................16

4Result of Installation and Operational Qualification.......................................................... 17

3/17 5084132-03

1Basic information

Model: _________________________

Serial number: _________________________

Date of qualification (DD/MM/YYYY):_________________________

Qualification carried out by (name):_________________________

Customer: _________________________

Location of the appliance:_________________________

_________________________

COMMENTS

4/17 5084132-03

1.1 Signature and device list

Each person, who participates in the present IQ/OQ qualification, shall fill out the signature

list below in order to establish traceability to the test signatures.

All devices used for the execution of the current IQ/OQ shall be noted in below device list.

SIGNATURE LIST

NAME (CAPITAL LETTERS)

JOB TITLE

DATE AND SIGNATURE

DEVICE LIST

DESCRIPTION

BRAND

MODEL

DATE OF

CALIBRATION

5/17 5084132-03

2Installation Qualification

The Installation Qualification is intended to verify that the appliance is delivered in corre-

spondence with the ordered appliance and is installed in a correct environment.

The IQ is concluded if all acceptance criteria are fulfilled. If any deviations are found during

the qualification, such must be corrected and thereafter approved.

2.1 Documentation verification

Check and verify the following points:

DOCUMENTATION

CHECK (

√

)

COMMENTS

Ensure operating instruction manual has been supplied with

the appliance

Ensure operating instruction manual has been read and un-

derstood by the user(s)

2.2 Appliance check points

Check and verify the following points:

SCOPE OF SUPPLY

CHECK (

√

)

COMMENTS

Delivery

nsure that

the appliance complies with the

ordered appliance as well as containing op-

tional accessories (if any) as stated in the

purchase order of the customer

Power supply

Ensure the power supply

of the appliance

complies with the purchase order of the cus-

tomer (check the rating plate of the appli-

ance)

6/17 5084132-03

APPLIANCE

CHECK POINTS

CHECK (

√

)

COMMENTS

Packaging &

protection mate-

rial

Ensure a

ll packing material has been re-

moved

Ensure a

ll protection foi

l has been removed

from the cabinet and display

Cabinet

Ensure n

o scratches on exterior cabinet

Ensure n

o scratches on interior cabinet

Ensure n

o cracks on plastic frames

Door

Ensure the door c

an open and close

Ensure the door c

an be lock

ed using

the key

Ensure n

o gap between gasket and frame

Ensure n

o scratches

Castors

Ensure that the c

astors are locked (if

equipped with castors)

Feet

Ensure that the f

eet are levelled (if equipped

with levelling feet)

Controller

Ensure n

scratches on

the

display

Ensure that a

ll cables

are

mounted

according

to safety requirements

Remote alarm

connection

Ensure that t

he remote alarm contact is cor-

rectly connected to an external system (utili-

zation of the remote alarm contact is option-

al)

Compressor

Ensure n

o unusual noise

Fan

Ensure n

o unusual noise

Electrical con-

nection

Ensure that the power cord is correctly

mounted on the appliance

Ensure that the electrical connection is

per-

formed in accordance with:

a) power supply noted on the rating

plate of the appliance

b) power supply of the power socket

c) operating instruction manual

d) local regulations

Ensure that the

power supply fuse of the

switchboard is 10A

Cleaning

Ensure that t

he appliance has been cleaned

7/17 5084132-03

2.3 Environmental verification

Check and verify the following points:

ENVIRONMENT

CHECK (

√

)

COMMENTS

Ambient condi-

tions

Ensure

by using a thermometer

a m

aximum

ambient temperature of:

+25°C (freezer models)

+43°C (refrigerator models)

Ensure n

o direct sunlight on the

appliance

Ensure that the appliance is not

located near

heat sources

Ensure that t

he room is well ventilated

Surface

Ensure installation

on a

solid

and

flat surface

to avoid vibrations and unintentional noise

Air

circulation

Ensure

free spac

around the appliance

ensure the required air circulation according

to the operating instructions manual

CHECKED/TESTED BY

DATE

SIGNATURE

VERIFIED BY

DATE

SIGNATURE

8/17 5084132-03

3Operational Qualification

The Operational Qualification is intended to verify the function of the appliance and its readi-

ness for operation.

The OQ is concluded if all acceptance criteria are fulfilled. If any deviations are found during

the qualification, such must be corrected and thereafter approved.

Check and verify the following parameters and fill out the below table. We recommend that the

parameters are checked app. once a year.

3.1 Parameter verification and adjustment

DESCRIPTION

DEFAULT

SETTINGS

LRE 700

LRE 1400

EFAULT

SETTINGS

LFE 700

LFE 1400

CHECK/ADJUST THE

SET VALUE AND

NOTE THE VALUE

COMMENTS

Password

(PS)*22 22

Set point

(St) +4 -20

Control delta /

hysteresis (rd) 2 2

Interval between

defrost (dl) N/A 6 hrs.

High tempera-

ture alarm by-

pass time after

defrost and door

open (d8)

0 0

Alarm bypass

after door open

(d8d)

2min. 2 min.

Low

temp. alarm

(AL)**4 10

High

temp. alarm

(AH)**5 8

Low and high

alarm delay (Ad) 5 min. 5 min.

*Use of password 22 will access all parameters. Password 0, which is stated in the user manual, will only

access a selected number of parameters.

**AL and AH are relative thresholds to the set point. The set values must be positive values.

Examples

Set point: +4°C

High. temp. alarm (AH): 5

AH alarm activation: +9°C

Set point: +4°C

Low. temp. alarm (AL): 3

AL alarm activation: +1°C

Set point: -20°C

High. temp. alarm (AH): 7

AH alarm activation: -13°C

Set point: -20°C

Low. temp. alarm (AL): 6

AL alarm activation: -26°C

9/17 5084132-03

3.2 Placement of test probes

Prepare the appliance for the Operational Qualification by mounting test probes.Place the test

probes inside the appliance as described in below table and as shown in below illustration (see

the red arrows).

Each test probe must be loaded with a 25 gr. brass block

(or equivalent) to ensure precise temperature measurement.

LRE/LFE 700

PROBE

LOCATION

Probe no. 1

45 c

distance

from the top of

the

interior cabinet

Probe no. 2

enter

of the

chamber

(72 cm distance from the top of

the

interior cabinet)

Probe no.

45 cm distance from the bottom of the interior cabinet

robe

no. 1

robe

no.

robe

no.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Congelador de Arctiko

Arctiko

Arctiko LTFE 140 Manual de usuario

Arctiko

Arctiko UPUL 580 Manual de usuario

Arctiko

Arctiko ULTF 80 Manual de usuario

Arctiko

Arctiko ULUF Manual de usuario

Arctiko

Arctiko LCF 100 Manual de usuario

Arctiko

Arctiko Integraline ULUF P10 Manual de usuario

Arctiko

Arctiko CRYO 170-0 Manual de usuario

Arctiko

Arctiko ULTF 80 Manual de usuario

Arctiko

Arctiko Integraline ULUF P390GG Manual de usuario

Arctiko

Arctiko CRYO 170 Manual de usuario

Arctiko

Arctiko ULUF P390 Manual de usuario

Arctiko

Arctiko CRYO 170-0 Manual de usuario

Arctiko

Arctiko SUF 100 Manual de usuario

Arctiko

Arctiko ULUF 120 Manual de usuario

Arctiko

Arctiko LTFE 310 Manual de usuario

Arctiko

Arctiko UPUL 580 Manual de usuario

Arctiko

Arctiko SF SERIES Manual de usuario

Arctiko

Arctiko LTF 535 Manual de usuario

Manuales populares de Congelador de otras marcas

Siemens

Siemens GU..D SERIES Manual de usuario

Omcan

Omcan FR-CN-0155 Manual de usuario

Beko

Beko FNE290E24W Manual de usuario

Electrolux

Electrolux ARCTIS G 8 60 50-6I Manual de usuario

Electrolux

Electrolux EUF2042AOX Manual de usuario

Dometic

Dometic CoolFreeze CFX95DZ Manual de usuario

Electrolux

Electrolux EUF7000W1 Manual de usuario

Polar Electro

Polar Electro CT330 Manual de usuario

MPM

MPM MPM-145-SK Series Manual de usuario

SAF

SAF PRESTOTIG 200AC/DC Guía rápida

Zanussi

Zanussi ZFT11407WA Manual de usuario

AEG

AEG A63190GT Manual de usuario

AEG

AEG A81000TNW0 Manual de usuario

Matsui

Matsui MUC50S15E Manual de usuario

NEFF

NEFF G4344X8 Manual de usuario

Frigidaire

Frigidaire FV 1246 H Manual de usuario

Frigidaire

Frigidaire FFC13K1AW Manual de usuario

Electrolux

Electrolux EU 2400C Manual de usuario